Oracle 3.84 TB NVMe Solid State Drive Specification
This section provides the specification for Oracle 3.84 Tbyte, 2.5-inch, NVMe Solid State Drives.
Parent topic: Oracle 3.84 TB NVMe SSD Product Information
Oracle 3.84 Tbyte, 2.5-inch, NVMe Solid State Drive Specification
General specifications are listed in the following table.
Specification | Value |
---|---|
Device name |
|
Manufacturing name |
3.84TB Intel ArbordalePlus, 3D NAND TLC SFF 2.5-inch Solid State Drive |
Form factors |
|
PCIe interface |
PCIe Gen4 Interface, x4 lanes |
Flash controller |
|
Features |
|
Product Compliance |
|
Product ecological compliance |
RoHS |
Certifications and declarations |
cUL-us, CE, TUV-GS, CB, CE, BSMI, KCC, Morocco, VCCI, RCM, FCC, IC |
Table 2-1 Drive Usage Information
Usage | Description |
---|---|
Operating temperature (Case) |
0 to 70 degrees Celsius |
Non-Operating temperature |
-40 to 95 degrees Celsius |
Maximum temperature (SMART trip) |
Thermal Throttling at 70 degrees Celsius (SMART) when approaching maximum temperature. Thermal Shutdown at 80 degrees Celsius (SMART) |
Error rates |
Uncorrectable Bit Error Rate (UBER): 1 sector per 10^17 bits read |
Data retention |
3 months powered off at 40 degrees Celsius at end of rated endurance |
Endurance |
Refer to the JEDEC JESD218A standard for SSD device life and endurance measurement techniques. |
Table 2-2 Drive Reliability
Attribute | Value |
---|---|
Component Design Life (Useful life) |
5 years |
MTBF |
2,000,000 hours |
Expected AFR (Annualized Failure Rate) |
0.44% for normal 24x7 operating conditions |
Table 2-3 Drive Capacity and Performance
Attribute | Value |
---|---|
Capacity, formatted |
Default Formatted Capacity: 3,840,755,982,336 bytes Sector Size (LBA size): 512 bytes per sector |
Capacity, unformatted |
Unformatted Capacity (Total User Addressable LBA): 7501476528 |
Capacity, raw NAND |
4096 GiB |
Random 4 KB Read |
780K IOPS Typical 4KB Random Read QD=1, Worker=1: 78us |
Random 4 KB Write |
Random 4 KB Write 118K IOPS Typical 4KB Random Write QD=1, Worker=1: 15us |
Sequential Read |
128 KB, QD 128, Worker=1: 7,000 MB/s |
Sequential Write |
128 KB, QD 128, Worker=1: 3,500 MB/s |
Interface data transfer rate |
|
Table 2-4 Drive Electrical Specifications
Attribute | Value |
---|---|
Power On to Ready (no rebuild) |
RTD3R: 5 seconds
|
Power On to Ready (full rebuild) |
18 seconds |
Supply Voltage / Tolerance |
12 V +10%/-20% 3.3 Vaux +/-15% |
Inrush Current |
12 V, 1.5 A |
Power Consumption |
|
Power Requirements |
Refer to vendor product specification. |
Table 2-5 Drive Physical Characteristics
Height | Width | Depth | Weight |
---|---|---|---|
15.0 mm +/-0.5 mm |
69.85 +/-0.25 mm |
100.45 mm Max |
146 +/- 5 g |
Table 2-6 NVMe Solid State Drive Characteristics
Attribute | Value |
---|---|
Minimum operating system versions |
Refer to the server product notes for minimum operating system versions, hardware, firmware, and software compatibility. |
Life monitoring capability |
Provides alerts for proactive replacement of the drive before the endurance is depleted. Provides endurance remaining in NVMe SMART logs. SSD supports the standard method defined by NVMe for Solid State Drive to report NAND wear through the “Get Log” command SMART/Health Information Percentage Used field. The units are whole percentage of wear. Percentage Used: Contains a vendor specific estimate of the percentage of NVM subsystem life used based on the actual usage and the manufacturer’s prediction of NVM life. A value of 100 indicates that the estimated endurance of the NVM in the NVM subsystem has been consumed, but may not indicate an NVM subsystem failure. The value is allowed to exceed 100. Percentages greater than 254 are represented as 255. This value is updated once per power-on hour (when the controller is not in a sleep state). Refer to the JEDEC JESD218A standard for SSD device life and endurance measurement techniques. |
End-to-End data-path protection |
T10 DIF Type 0, Type 1, Type 2, Type 3, no performance impact. T10 DIF (data integrity field) end-to-end data protection includes multiple levels of data-path protection. |
Enhanced power-loss data protection |
Energy storage components complete buffered writes to the persistent flash storage in case of a sudden power loss. |
Power loss protection capacitor self-test |
Supports testing of the power loss capacitor. Power is monitored using SMART (Self-Monitoring, Analysis, and Reporting Technology) attribute critical warning. |
Out-of-Band Management (SMBUS) |
Managed through the SMBUS. Provides out-of-band management by means of SMBUS interface. This requires 3.3V auxiliary voltage. SMBUS access includes NVMe-MI, the VPD page and temperature sensor. |
Hot-Plug Support |
Supports PCIe presence detect and link-up detect. Device advanced power loss protection provides robust data integrity. During IOs, the storage drive integrated monitoring enables the integrity of already committed data on the media and commits acknowledged writes to the media. |
Management utilities |
For more information about management utilities, refer to the server documentation. |
Table 2-7 LED Status Indicator Characteristics
LED | Color | Normal operation | Status |
---|---|---|---|
(1) Ready to Remove |
Blue |
OFF – The drive has not been prepared for removal. Normal operation. |
STEADY ON – The drive is in standby power state. The drive can be removed safely during a hot-plug operation. A lit Ready to Remove indicator indicates that service action is allowed on the drive. |
(2) Service Action Required |
Amber |
OFF – Normal operation. |
STEADY ON – Service action is required. The system has detected a fault with the drive. BLINKING – Locater. Status indicator blinks on and off to locate drive. |
(3) Power/OK/Activity |
Green |
STEADY ON (does not blink) – Drive is engaged and is receiving full power. Normal operation. |
RANDOM BLINKING – There is drive activity. Status indicator blinks on and off to indicate activity. OFF – Power is off, or installed drive is not recognized by the system. |
Parent topic: Oracle 3.84 TB NVMe Solid State Drive Specification