Install the Fan Tray

This procedure should be performed only when servicing the following replaceable component:

• Disk backplane

• SAS cables

• NVMe cables

• Temperature sensor

• Motherboard assembly

1. Lower the fan tray into the server [1].
   
   
   
2. Using a Torx T25 screwdriver, tighten the three spring-mounted screws that secure the fan tray to the server chassis [2].

   Note:

   If you disconnected the NVMe cables from the motherboard, reposition the NVMe cables into the left cable channel and reconnect them to the motherboard NVMe connectors.
3. Install the fan modules into the fan tray.

   See Install a Fan Module.

4. Install the air baffle.

   See Install the Air Baffle

5. Continue with the next step in the service procedure.

Related Topics:

• Install a Fan Module

• Servicing the Disk Backplane

• Servicing SAS Cables

• Servicing NVMe Cables

• Servicing the Motherboard Assembly