If you are removing and
replacing only the internal HBA card, you do not need to remove the HBA super
capacitor. You can disconnect the HBA super capacitor cable from the internal HBA
card and then remove the internal HBA card from the system.
Grasp both ends of the cable connector, press in on the release latch,
and then unplug the connector [1].
The HBA super capacitor is secured to the HBA super capacitor tray by
a recloseable fastener, which allows it to be easily removed and
replaced.
To separate the HBA super capacitor from the tray, place your fingers
under the super capacitor and lift up [2].
When removing the super capacitor, by careful not to snag the cable on
the tray wire guide. Place the super capacitor on an antistatic
mat.
Rotate the PCIe card locking mechanism, and then lift up on the PCIe HBA card
to disengage it from the motherboard connectors [1].
Disconnect the super capacitor cable and the SAS cables from the Oracle
Storage 12Gb SAS PCIe RAID HBA, Internal card [1].