Oracle Exadata Storage Server X9-2 EF, HC, and XT Service Manual Servicing SAS Cables Remove SAS Storage Drive Cables Remove SAS Storage Drive Cables Prepare the server for service. Power off the server and disconnect the power cords from the power supplies. See Powering Down the Server. Extend the server to the maintenance position. See Extend the Server to the Maintenance Position. Attach an antistatic wrist strap to your wrist, and then to a metal area on the chassis. See Take Antistatic Measures. Remove the server top cover. See Remove the Server Top Cover. Remove the air baffle. See Remove the Air Baffle. Remove fan modules. See Remove a Fan Module. Remove the fan tray from the server. See Remove the Fan Tray. Disconnect the SAS cables from the disk backplane [1]. Press and hold the green button on the connector to disengage the locking mechanism, then gently pull the connector from the disk backplane. Disconnect the SAS cables from the Oracle Storage 12Gb SAS PCIe RAID HBA, Internal card in PCIe slot 10 [2]. Press each latch, and then pull out to disengage the cable from each connector. See also Remove the Internal HBA Card and HBA Super Capacitor. Remove the SAS cables from the server [3]. Carefully remove the SAS cable bundles from the server. Be careful not to snag the cables on the server components. Related Topics: Remove the Internal HBA Card and HBA Super Capacitor Install SAS Storage Drive Cables