Replaceable Components
The following table lists the replaceable components in the server and directs you to the replacement instructions.
Replaceable Component (Service Level) | Description | Replacement Instructions |
---|---|---|
Battery (Cold service) |
Lithium coin-cell battery that powers the CMOS BIOS and real-time clock. |
|
Air baffle (Cold service) |
Aids in the cooling the system components. |
|
DIMMs (Cold service) |
Add or replace memory modules in the system. |
|
Storage drives (Hot service) |
Storage drive configurations can comprise both hard disk drives (HDDs), solid state disk drives (SSDs), or NVMe drives. Configurations include:
|
|
Internal M.2 flash SSDs (Hot service) |
Supports up to two hot-pluggable internal M.2 SATA or NVMe flash SSDs. |
|
Fan modules (Hot service) |
Four fan modules for cooling the server components. |
|
PCIe cards (Cold service) |
Optional add-on cards that can expand the functionality of the server. |
|
Power supply units (Hot service) |
Two fully redundant AC-powered power supplies. |
|
Processor and heatsink (Cold service) |
The processor that carries out the instructions of the system. |
|
Disk backplane (Cold service) |
Provides power and communications connectors for storage drives. |
|
SAS cables (Cold service) |
Provides signals between the front disk backplane and the Oracle Storage 12 Gb SAS PCIe RAID HBA, Internal card. |
|
NVMe cables (Cold service) |
Provides signals between the Oracle Retimer card located in PCIe slot 10 and the disk backplane. Note: NVMe cables between the Oracle Retimer card and the storage backplane are required if storage drive slots 8 through 11 contain NVMe SSDs. |
|
Oracle Storage 12 Gb SAS PCIe RAID HBA, Internal card and super capacitor (Cold service) |
Located in PCIe slot 10, the Oracle Storage 12 Gb SAS PCIe RAID HBA, Internal card manages SAS storage drives. |
|
Front LED indicator module (Cold service) |
Contains the push-button circuitry and LEDs that are displayed on the front panel. |
|
Temperature sensor (Cold service) |
Provides temperature information for the system. |
|
Motherboard assembly (Cold service) |
Provides connectors for the DIMMs, processors, PCIe risers, and other components. |