1. Installation and Configuration Guide
  2. Configure the Library Connection (SNMP or SCI)
  3. Configure SNMP (for SL150, SL500, SL3000, SL8500)
  4. Update the SNMP Configuration After a Library or STA Change
  5. Update SNMP After Changing the STA Server IP Address

Update SNMP After Changing the STA Server IP Address

If the IP address of the STA server has been changed, use this procedure to ensure SNMP connectivity between STA and all monitored libraries. You must perform the complete procedure for each monitored library.

Confirm Network and SNMP Connectivity

Confirm good communication between STA and the library. See Verify SNMP Communication with a Library (optional) for instructions.

Update SNMP Settings on the Library

  1. Retrieve the index number of the STA trap recipient. See Display All SNMP Trap Recipients for instructions.
  2. Delete the STA trap recipient with the old IP address. See Delete or Modify the STA Trap Recipient for instructions.
  3. Add the STA trap recipient with the new IP address. See Create the STA SNMP v3 Trap Recipient.

Update SNMP Settings in STA

  1. Update the STA IP address in the SNMP connection settings. See Configure the SNMP Connection to a Library for instructions.
  2. Reestablish the SNMP connection with the library. See Test the Library Connection for instructions.
  3. Update the library configuration data. This step is necessary only if drive or media configuration changes have occurred on the library. See Manually Collect Library Data for instructions.