1. Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x
  2. Installing a Sun ZFS Storage 7x20 Controller
  3. Installing the Mounting Brackets on a Sun ZFS Storage 7x20 Controller

Installing the Mounting Brackets on a Sun ZFS Storage 7x20 Controller

Use the following procedure to install the mounting brackets on a Sun ZFS Storage 7420, 7320, or 7120 controller.

Note:

If the mounting brackets are shipped inside the slide rails, you must remove them before beginning this procedure; see Removing the Sun ZFS Storage 7x20 Mounting Brackets from Inside the Slide Rails.
  1. Position a mounting bracket against the chassis so that the slide rail lock is at the front of the chassis, and the keyhole openings on the mounting bracket are aligned with the locating pins on the side of the chassis.

    The following graphic illustrates how to attach the Sun ZFS Storage 7120/7320 mounting brackets.


    Graphic showing the left mounting bracket being installed on the chassis
  2. The following graphic illustrates how to attach the Sun ZFS Storage 7x20 mounting brackets.

    Graphic showing the left and right mounting brackets being installed on each side of the chassis
  3. With the heads of the four chassis locating pins protruding through the four keyhole openings in the mounting bracket, pull the mounting-bracket toward the front of the chassis until the mounting-bracket clip locks into place with an audible click.
  4. Verify that all mounting pins are securely fastened to the chassis.
  5. Repeat to install the remaining mounting bracket on the other side of the chassis.