Oracle ZFS Storage ZS4-4 Rear Panel Components

The Oracle ZFS Storage ZS4-4 rear panel is shown in the following figure. Base configuration PCIe cards are not depicted in this illustration. For more information about PCIe cards, see Oracle ZFS Storage ZS4-4 PCIe I/O Cards in Oracle ZFS Storage Appliance Customer Service Manual, Release OS8.8.x.


Figure showing the components on the back of the controller

1 Power supply unit (PSU) 0 indicator panel

2 PSU 0 AC inlet

3 PSU 1 indicator panel

4 PSU 1 AC inlet

5 System status indicator panel

6 PCIe card slots 1-6

7 Network (NET) 10 GbE ports: NET 0, NET 1, NET 2, NET 3

8 USB 2.0 connectors (2)

9 PCIe card slots 7-11

10 Network management (NET MGT) 10/100/1000 BASE-T Ethernet port

11 Serial management (SER MGT) RJ-45 port

12 DB-15 video port

  • PCIe Slots - The Oracle ZFS Storage ZS4-4 base configuration contains the following PCIe cards:

    • Slot 2 - One 8-port SAS-2 internal HBA

    • Slot 4 - One cluster interface card

    • Slots 6 and 7 - Two 4-port (4x4) SAS external HBAs

For information about PCIe slot order, see Oracle ZFS Storage ZS4-4 PCIe I/O Cards in Oracle ZFS Storage Appliance Customer Service Manual, Release OS8.8.x.

  • Ethernet Ports - Oracle ZFS Storage ZS4-4 has four RJ-45 10-Gigabit Ethernet (10GbE) network connectors on the rear panel, labeled NET 0, NET 1, NET 2, and NET 3 (bottom left to top right), as shown in the following figure. Use these ports to connect the appliance to the network.

    The LEDs located above the NET ports, labeled 2, 0, 3, 1 (left to right) are Link/Activity indicators.

    Figure showing the four Ethernet ports and Link Activity indicators

    OFF (1)

    No Link

    ON (0)

    Link and no activity

    Blink

    Link and activity

    Note:

    Speed is not indicated for the NET ports.

  • Network Management Port - The network management connector (NET MGT) is an RJ-45 10/100/1000 BASE-T Ethernet port and provides an alternate terminal interface to the service processor (SP) console.

    Graphic showing the network management port

  • Serial Management Port - The serial management connector (SER MGT) is an RJ-45 port and provides a terminal connection to the SP console.

    Graphic showing the serial management port

  • HBA Ports - The 4x4 SAS HBA provides connectivity to external Oracle Storage Drive Enclosure DEx-24 disk shelves. The HBA logical ports are numbered 0-3, bottom to top.

    Graphic showing the logical port numbers of the SAS HBA