Overview of the Oracle ZFS Storage ZS5-2 Controller
This section provides an overview of the Oracle ZFS Storage ZS5-2 controller. For installation instructions, refer to Installing an Oracle ZFS Storage ZS5-2 Controller. For service instructions, refer to Servicing the Oracle ZFS Storage ZS5-2 Controller in Oracle ZFS Storage Appliance Customer Service Manual, Release OS8.8.x.
Refer to https://oracle.com/zfsstorage for the most recent component specification.
Oracle ZFS Storage ZS5-2 Physical Specifications
The Oracle ZFS Storage ZS5-2 controller chassis dimensions are as follows:
Dimension | Measurement | Dimension | Measurement |
---|---|---|---|
Height |
3.43 in./87.1 mm |
Depth |
25.2 in./640.0 mm |
Width |
17.52 in./445 mm |
Weight |
38.5 lb./17.5 kg |
Oracle ZFS Storage ZS5-2 Electrical Specifications
The Oracle ZFS Storage ZS5-2 controller has two N+1 AC redundant hot-swappable AC power supplies, rated 91% efficiency. To understand the overall power consumption, see Oracle's online power calculator at http://www.oracle.com/goto/powercalculators .
Parameter | AC Power Supplies |
---|---|
Nominal input frequencies |
50/60 Hz |
Operating input voltage range |
100 VAC (Japan only) 110-127 VAC (90-132 range) 200-240 VAC (180-264 range) |
Rated input current |
10 A @ 100 VAC 9 A @110-127 VAC 5.5 A @ 200-240 VAC |
Oracle ZFS Storage ZS5-2 Acoustic Noise Emissions
In compliance with the requirements defined in ISO 9296, the workplace-dependent noise level of this product is less than 75 dBA.
Oracle ZFS Storage ZS5-2 Configuration Options
Oracle ZFS Storage ZS5-2 incorporates one or two controllers and one to sixteen disk shelves. Each controller has six PCIe Gen3 slots. Each controller includes eight 2.5'' disk slots that accommodate two system disks. Read cache devices are installed in disk shelves; therefore, the remaining six disk slots have permanent filler panels. The following table describes the configuration options.
CPU | Memory | System Disks | PCIe Slots | HBA |
---|---|---|---|---|
2x18-core, 2.3 GHz |
384 GB 768 GB |
2x2.5'' SAS-3 |
Two dedicated; four available |
4-port (4x4) SAS-3 12 Gb/s external 4-port (4x4) SAS-2 6 Gb/s external |
Refer to https://oracle.com/zfsstorage for the most recent component specification.
Oracle ZFS Storage ZS5-2 Front Panel Components
The Oracle ZFS Storage ZS5-2 controller drive slots and front panel components are shown in the following figure.
![The image shows the Oracle ZFS Storage ZS5-2 front panel components. The image shows the Oracle ZFS Storage ZS5-2 front panel components.](img/panel_01.png)
1 LEDs: Locator, Service, Power |
2 System disk 1 |
3 Permanent HDD filler panels |
4 Two USB 2.0 ports |
5 RFID tag |
6 System disk 0 |
7 Alarm indicators (not used) |
Oracle ZFS Storage ZS5-2 Rear Panel Components
The Oracle ZFS Storage ZS5-2 controller PCIe slots and rear panel components are shown in the following figure.
![The image shows the Oracle ZFS Storage ZS5-2 rear panel components. The image shows the Oracle ZFS Storage ZS5-2 rear panel components.](img/panel_02.png)
1 Power Supply Unit (PSU) 1 |
2 Second PCle option (slot 1) |
3 Third PCle option (slot 3) |
4 Network Management (NET MGT) 10/100/1000 BASE-T Ethernet port |
5 First PCle option (slot 5) |
6 Second 4x4 SAS HBA, or fourth PCle option (slot 6) |
7 Network (NET) 10 GbE ports: NET 0, NET 1, NET 2, NET 3 |
8 SER MGT port |
9 Two USB 3.0 ports |
10 Cluster interface card (slot 4) |
11 First 4x4 SAS HBA (slot 2) |
12 Power Supply Unit (PSU) 0 |
Cluster Interface Card Compatibility - The Oracle ZFS Storage ZS5-2 controller contains a Version 3 cluster interface card, which is incompatible with Version 2.
For information about how to connect cables to form a cluster, see Connecting Cluster Cables.
Cable Management Arm
The following figure identifies the components of the cable management arm (CMA). For installation instructions, see Installing an Oracle ZFS Storage ZS5-2 Cable Management Arm.
![graphic showing Oracle ZFS Storage ZS5-2 controller cable management arm graphic showing Oracle ZFS Storage ZS5-2 controller cable management arm](img/a3183_cma_components.jpg)
1 Connector A |
6 Connector D |
2 Front slide bar |
7 Slide-rail latching bracket (used with connector D) |
3 Velcro straps (6) |
8 Rear slide bar |
4 Connector B |
9 Cable covers |
5 Connector C |