Overview of the Oracle ZFS Storage ZS5-4 Controller

This section provides an overview of the Oracle ZFS Storage ZS5-4 controller. For installation instructions, refer to Installing an Oracle ZFS Storage ZS5-4 Controller. For service instructions, refer to Servicing the Oracle ZFS Storage ZS5-4 Controller in Oracle ZFS Storage Appliance Customer Service Manual, Release OS8.8.x.

Refer to https://oracle.com/zfsstorage for the most recent component specification.

Oracle ZFS Storage ZS5-4 Physical Specifications

The Oracle ZFS Storage ZS5-4 controller chassis dimensions are as follows:

Dimension Measurement Dimension Measurement

Height

5.1 in./129.9 mm

Depth

28.8 in./732.0 mm

Width

17.2 in./436.5 mm

Weight (Maximum)

88 lb./40 kg

Oracle ZFS Storage ZS5-4 Electrical Specifications

The Oracle ZFS Storage ZS5-4 controller has two hot-swappable rear accessible power supplies with N+N redundancy. To understand the overall power consumption, see Oracle's online power calculator at http://www.oracle.com/goto/powercalculators .

Parameter AC Power Supplies

Nominal input frequencies

50/60 Hz

Operating input voltage range

200-240 VAC

Rated input current

10 A @ 200 to 240 VAC

Maximum power consumption

200W

Maximum heat output

6824 BTU/hr

Oracle ZFS Storage ZS5-4 Acoustic Noise Emissions

In compliance with the requirements defined in ISO 9296, the workplace-dependent noise level of this product is less than 75 dBA (bystander position, max. ambient).

Oracle ZFS Storage ZS5-4 Configuration Options

Oracle ZFS Storage ZS5-4 incorporates one or two controllers and one to forty-eight disk shelves. Each controller has eleven PCle Gen3 slots. Each controller includes six 2.5'' disk slots that accommodate two system disks. Read cache devices are installed in disk shelves; therefore, the remaining four disk slots have permanent filler panels. The following table describes the configuration options.

CPU Memory System Disks PCIe Slots HBA

4x18-core, 2.6 GHz

1536 GB

2x2.5'' SAS-3

Four dedicated; seven available

4-port (4x4) SAS-3 12 Gb/s external

4-port (4x4) SAS-2 6 Gb/s external

The most recent component specification is located at https://www.oracle.com/storage/nas/index.html .

Oracle ZFS Storage ZS5-4 Front Panel Components

The Oracle ZFS Storage ZS5-4 controller drive slots and front panel components are shown in the following figure.


The image shows the Oracle ZFS Storage ZS5-4 front panel components.

1 LEDs (left to right)

  • Locator

  • Service action required

  • Power/OK

2 Power button

3 Alert indicators (left to right)

  • Service Processor (SP) OK/Fault

  • Fan/ CPU/ Memory service action required

  • Power Supply (PS) service action required

  • Over-temperature warning

4 Permanent HDD filler panels

5 System disk 1

6 System disk 0

7 DVD filler panel

8 DB-15 VGA port

9 Two USB 2.0 ports

10 RFID tag

   

Oracle ZFS Storage ZS5-4 Rear Panel Components

The Oracle ZFS Storage ZS5-4 controller PCIe slots and rear panel components are shown in the following figure.


The image shows the Oracle ZFS Storage ZS5-4 rear panel components.

1 Power Supply Unit (PSU) 0

2 PSU 1

3 DB-15 VGA port

4 SER MGT port

5 Service Processor (SP) NET MGT port

6 First PCle (slot 11)

7 Fifth PCIe (slot 10)

8 Third 4x4 SAS HBA or seventh PCIe (slot 9)

9 Second PCIe (slot 8)

10 4X4 SAS HBA (slot 7)

11 Two USB 2.0 ports

12 Network (NET) 10 Gb Ethernet ports, NET 0 - NET 3

13 4X4 SAS HBA (slot 6)

14 Third PCIe (slot 5)

15 Cluster interface card (slot 4)

16 Fourth 4X4 SAS HBA or sixth PCIe (slot 3)

17 Internal SAS-3 HBA (slot 2)

18 Fourth PCIe (slot 1)

19 System status LEDs (left to right)

  • Power/OK (green)

  • Attention (amber)

  • Locate (white)

20 PSU 1 AC inlet

21 PSU 0 AC inlet

Cluster Interface Card Compatibility - The Oracle ZFS Storage ZS5-4 controller contains a Version 3 cluster interface card, which is incompatible with Version 2.

For information about how to connect cables to form a cluster, see Connecting Cluster Cables.