About Virtual Machine DB Systems

Oracle Cloud Infrastructure (OCI) offers DB systems on virtual machines.

There are two types of database systems (DB systems) on virtual machines:
  • Single-node DB system: A 1-node DB system consists of one virtual machine.
  • Multi-node RAC DB system: A 2-node DB system consists of two virtual machines.

If you must provision a DB system for development or testing purposes, a special fast-provisioning single-node DB system is available.

When you create a DB system, you select the Oracle Database edition and version that applies to the database on that DB system. You cannot change the selected edition. Depending on your selected Oracle Database edition and version, your DB system can support multiple pluggable databases (PDB). See the following Oracle Database licensing topic for information about the maximum number of pluggable and container databases (CDB) available for your selected Oracle Database version.
A DB system can have only a single Database Home, which in turn can have only a single database. A DB system database uses OCI block storage instead of local storage. You specify a storage size when you create the DB system, and you can scale up the storage as required at any time. To change the number of CPU cores on an existing DB system, you must change the shape of that DB system. For more information, see Change the Shape of a DB System.
Note

The shape change operation takes place in a rolling fashion for multi-node RAC DB systems, enabling you to change the shape with no database downtime.

Available Shapes and How It Determines the Resources Allocated

When you create a DB system, you select a shape, which determines the resources allocated to the DB system. After you create the DB system, you can change its shape to adapt to new processing capacity requirements. The following shapes are available:

Flexible Shapes

Flexible shapes let you customize the number of OCPUs allocated to an instance. When you create an instance using a flexible shape, you select the number of OCPUs that you require for the workloads that run on the instance. This flexibility lets you build instances that match your workload, enabling you to optimize performance and minimize cost. The amount of memory allowed is based on the number of OCPUs selected, and the ratio of memory to OCPUs depends on the shape.

Flexible shapes are available with Ampere, AMD, and Intel processors. The following table shows the available shapes.

Table 1-2 Flexible Shapes

Shape CPU Cores Memory Network Bandwidth
Ampere VM.Standard.A1.Flex Minimum is 1 OCPU and maximum is 57 OCPUs.

8 GB per OCPU.

Minimum is 8 GB and maximum is 456 GB total memory.

1 Gbps per OCPU.

Minimum is 1 Gbps and maximum is 40 Gbps network bandwidth.

AMD VM.Standard.E5.Flex Minimum is 1 OCPU and maximum is 64 OCPUs.

16 GB per OCPU.

Minimum is 16 GB and maximum is 1024 GB total memory.

1 Gbps per OCPU.

Minimum is 1 Gbps and maximum is 40 Gbps network bandwidth.

AMD VM.Standard.E4.Flex Minimum is 1 OCPU and maximum is 64 OCPUs.

16 GB per OCPU.

Minimum is 16 GB and maximum is 1024 GB total memory.

1 Gbps per OCPU.

Minimum is 1 Gbps and maximum is 40 Gbps network bandwidth.

Intel X9 VM.Standard3.Flex Minimum is 1 OCPU and maximum is 32 OCPUs.

16 GB per OCPU.

Minimum is 16 GB and maximum is 512 GB total memory.

1 Gbps per OCPU.

Minimum is 1 Gbps and maximum is 32 Gbps network bandwidth.

Note

  • Arm-based Ampere A1 shape is available for Oracle Database version 19c with the 19.19.0.0 and later release updates (RU) only.
  • AMD E5 shape is available for Oracle Database versions 23ai, 21c, and 19c.
  • AMD E4 shape is available for Oracle Database versions 23ai, 21c, and 19c with the 23.4.0.24.05, 21.6.0.0, 19.15.0.0, and later release updates (RU) only.
  • Intel X9 shape is available for Oracle Database versions 23ai, 21c, and 19c with the 23.4.0.24.05, 21.8.0.0, 19.17.0.0, and later release updates (RU) only.
  • Multi-node RAC DB systems require a minimum of two OCPUs per node.

Arm-based Ampere A1 Shape

Arm-based Ampere A1 shapes are flexible and enable you to customize the number of OCPUs allocated to an instance. The following are some additional details about Ampere A1 shapes:

  • Ampere A1 shape is only supported on Logical Volume Manager.
  • Ampere A1 shape is only supported on single-node DB systems.
  • Oracle Database Standard Edition is not supported on Ampere A1 shape-based DB systems.
  • A database software image cannot be used for creating a database on Ampere A1 shape-based DB systems.
  • Ampere A1 shape-based DB system provisioning and restoration are not supported if the backup destination for the database is the Autonomous Recovery Service.
  • Ampere A1 shape is not supported for databases that use OCI vault encryption.
  • The shape of Ampere A1 shape-based DB systems cannot be changed to Intel or AMD shape-based DB systems, and vice versa.
  • A backup of an Ampere A1 shape-based database cannot be restored on Intel or AMD shape-based DB systems, and vice versa.
  • Ampere A1 shape-based DB systems do not support Data Guard associations with Intel or AMD shape-based DB systems.

Standard Shapes

Standard shapes are available with Intel processors.

The following table shows the available shapes in the X7 series.

Table 1-3 VM Available Shapes X7 Series

Shape CPU Cores Memory
VM.Standard2.1 1 15 GB
VM.Standard2.2 2 30 GB
VM.Standard2.4 4 60 GB
VM.Standard2.8 8 120 GB
VM.Standard2.16 16 240 GB
VM.Standard2.24 24 320 GB
Note

  • Intel X7 shapes are available for Oracle Database versions 23ai, 21c, and 19c only.
  • VM.Standard2.1 shape cannot be used for multi-node RAC DB system.

Available Database Versions

OCI supports the creation of DB systems using older database versions. For each shape, the latest version and the two prior versions of the release are available at provisioning with the following specifications.

  • Arm-based Ampere A1 shape is available for Oracle Database version 19c with the 19.19.0.0 and later release updates (RU) only.
  • AMD E5 shape is available for Oracle Database versions 23ai, 21c, and 19c.
  • AMD E4 shape is available for Oracle Database versions 23ai, 21c, and 19c with the 23.4.0.24.05, 21.6.0.0, 19.15.0.0, and later release updates (RU) only.
  • Intel X9 shape is available for Oracle Database versions 23ai, 21c, and 19c with the 23.4.0.24.05, 21.8.0.0, 19.17.0.0, and later release updates (RU) only.
  • Intel X7 shapes are available for Oracle Database versions 23ai, 21c, and 19c only.
  • Migration to AMD E5 shape is currently not supported.
  • Migration to AMD E4 shape is supported for instances using the base image with 21.6.0.0, 19.15.0.0, and later release updates only. For instances created before those release updates, updating and migrating them is not possible as the base image itself does not support migration.
  • Migration to Intel X9 shape is supported for instances using the base image with 21.8.0.0, 19.17.0.0, and later release updates only. For instances created before those release updates, updating and migrating them is not possible as the base image itself does not support migration.

If you must create a DB system with an older database version, see Critical Patch Updates for information about known security issues with your chosen database version. You must also analyze and patch known security issues for the operating system included with the older database version. For information about security best practices for databases in OCI, see Securing Databases.

How various configurations affect the usable storage

The DB systems use OCI block storage. The following table shows details of the available storage options. Total storage includes available storage plus recovery logs.

General Information

  • You can scale your data storage and recovery storage separately. Oracle recommends keeping recovery storage at 20% of total storage or higher.
  • For multi-node RAC DB systems, storage capacity is shared between the nodes.
  • The recovery area storage is determined based on the storage selected. However, you can change the recovery area storage independently after provisioning.

Available data storage for flexible shapes

Table 1-4 Available data storage for flexible shapes

Available data storage (GB) Recovery area storage (GB) Total storage (GB)
256 256 712
512 256 968
1024 512 1736
2048 512 2760
4096 1024 5320
8192 2048 10440
12288 4096 16584
16384 4096 20680
24576 8192 32968
32768 8192 41160
40960 10240 51400
49152 12288 61640
57344 14336 71880
65536 16384 82120
73728 18432 92360
81920 20480 102600

Available data storage for standard shapes

Table 1-5 Available data storage for standard shapes

Available data storage (GB) Recovery area storage (GB) Total storage (GB)
256 256 712
512 256 968
1024 256 1480
2048 408 2656
4096 820 5116
6144 1228 7572
8192 1640 10032
10240 2048 12488
12288 2456 14944
14336 2868 17404
16384 3276 19860
18432 3688 22320
20480 4096 24776
22528 4504 27232
24576 4916 29692
26624 5324 32148
28672 5736 34608
30720 6144 37064
32768 6552 39520
34816 6964 41980
36864 7372 44436
38912 7784 46896
40960 8192 49352

Fast Provisioning Option

For single-node DB systems, OCI provides a "fast provisioning" option that enables you to create a DB system using Logical Volume Manager (LVM) as your storage management software. The standard way ("standard provisioning") is to provision with Automatic Storage Management (ASM).

The following details apply to the fast provisioning option:

  • When using the fast provisioning option, the number and size of the block volumes specified during provisioning determines the maximum total storage available through scaling.
  • Multi-node RAC DB systems require ASM and cannot be created using the fast provisioning option.
  • You can clone DB systems that have been created using the fast provisioning option.
  • You cannot use a custom database software image when provisioning a DB system with LVM.

Storage Scaling Considerations While Using Fast Provisioning

Note

This topic applies only to single-node DB systems.

When you provision a DB system using the fast provisioning option, the Available storage (GB) value you specify during provisioning determines the maximum total storage available through scaling. The following table details the maximum storage value available through scaling for each setting offered in the provisioning workflow:

Table 1-6 Storage Scaling Considerations While Using Fast Provisioning

Initial storage specified during provisioning (GB) Maximum storage available through scaling (GB)
256 2560
512 2560
1024 5120
2048 10240
4096 20480
8192 40960

Fault Domain Considerations for Multi-Node RAC DB Systems

When you provision a multi-node RAC DB systems, the system assigns each node to a different fault domain by default. Using the Advanced options link in the provisioning dialog, you can select the fault domain(s) to be used for your multi-node RAC DB systems and the system will assign the nodes to your selected fault domains. Oracle recommends that you place each node of a multi-node RAC DB system in a different fault domain.

For more information on fault domains, see Regions and Availability Domains.

Reboot a DB System Node for Planned Maintenance

The DB system nodes use underlying physical hosts that periodically must undergo maintenance. When such maintenance is required, OCI schedules a reboot of your DB system node and notifies you of the upcoming reboot. The reboot enables your DB system node to be migrated to a new physical host that is not in need of maintenance. (Stopping and starting the node will also result in the migration to a new physical host.) The only effect to your DB system node is the reboot itself. The planned maintenance of the original physical hardware takes place after your node has been migrated to its new host and has no effect on your DB system.

If your DB system node is scheduled for a maintenance reboot, you can proactively reboot your node (by stopping and starting it) using the Console or the API. This lets you control how and when your node experiences downtime. If you choose not to reboot before the scheduled time, then OCI will reboot and migrate your node at the scheduled time.

To identify the DB system nodes that you can proactively reboot, navigate to your system's DB System Details page in the Console and check the Node maintenance reboot field. If the instance has a maintenance reboot scheduled and can be proactively rebooted, this field displays the date and start time for the reboot. When the Maintenance reboot field does not display a date, your DB system has no scheduled node maintenance events.

To check for scheduled maintenance events using the API, use the GetDbNode operation to check the timeMaintenanceWindowEnd field of the DbNode resource. This field specifies when the system will begin the next scheduled node reboot.

To locate nodes that have scheduled maintenance reboots, you can use the Search Service with a predefined query to find all DB systems that have a scheduled maintenance reboot.

For instructions about using the Console to reboot a node, see Reboot a DB System.

Security Hardening Tool for DB systems

The DB systems provisioned using Oracle Linux 7 include a Python script, referred to as the Security Technical Implementation Guide (STIG) tool, that you can use to perform security hardening for your DB system.

Boot Volume Backups

Oracle maintains a weekly boot volume backup of your DB system so that the system can be easily restored in the event of a serious error or system failure. Boot volume backups are currently not accessible to users (there is no Console, API, or CLI access to a DB system boot volume backup), and Oracle bears the cost of keeping and maintaining the backup. In the event of a system failure, contact My Oracle Support to request that Oracle perform a restore of your DB system from the boot volume backup.