The following topics describe the procedures for adding Oracle Service Bus (OSB) to the enterprise deployment topology.
As you perform the tasks in this chapter, you will be referencing the directory variables listed in this section.
The values for several directory variables are defined in File System and Directory Variables Used in This Guide.
ORACLE_HOME
ASERVER_HOME
MSERVER_HOME
JAVA_HOME
OHS_DOMAIN_HOME
In addition, you'll be referencing the following virtual IP (VIP) addresses defined in Physical and Virtual IP Addresses Required by the Enterprise Topology:
ADMINVHN
Actions in these topics will be performed on the following host computers:
SOAHOST1
SOAHOST2
WEBHOST1
WEBHOST2
When adding Oracle Service Bus to your enterprise topology, you can add it to the existing SOA domain, or you can create a new domain for Oracle Service Bus, separate from the Oracle SOA Suite domain.
For more information, see Understanding the Topology Options for Oracle Service Bus.
If you decide to configure Oracle Service Bus in a separate domain, then keep in mind the following when you are using the instructions for adding Oracle Service to your topology:
Ignore any references to the SOA Managed Servers or the SOA Cluster. These elements of the domain will only exist if you are extending a domain that has already been extended with Oracle SOA Suite.
You must run the Repository Creation Utility (RCU) to create the SOAINFRA schema for the Oracle Service Bus domain. This schemas is required by Oracle Service Bus. You must use a unique SOAINFRA schema and schema prefix for the Oracle Service Bus domain.
This section provides an overview of of the steps you need to perform to add Oracle Service Bus your domain.
Table 13-1 lists and describes to high-level steps for extending an existing SOA domain or an existing Infrastructure domain for Oracle Service Bus.These steps assume you have already performed the steps required to create an initial Infrastructure domain and then you have extended the domain to include Oracle SOA Suite.
Table 13-1 Steps for Extending a SOA Domain to Include Oracle Service Bus
Step | Description | More Information |
---|---|---|
Install Oracle Service Bus software |
Install OSB software on the target system. |
|
Optionally, install the SOAINFRA schema in a supported database. |
OSB requires the SOAINFRA schema for the Be sure to use a unique schema for the SOAINFRA schema that will be used by the OSB domain. |
|
Optionally, create a new Infrastructure domain. |
If you are planning to run OSB in its own domain, then you must first create an Infrastucture domain, so you can extend that domain with OSB. |
Creating the Initial Infrastructure Domain for an Enterprise Deployment |
Run the Configuration Wizard to Extend the Domain |
Extend the SOA or Infrastructure domain to contain Oracle Service Bus components. |
Extending the SOA or Infrastructure Domain to Include Oracle Service Bus |
Configure a Default Persistence Store for Transaction Recovery |
To leverage the migration capability of the Transaction Recovery Service for the servers within a cluster, store the transaction log in a location accessible to a server and its backup servers. |
Configuring a Default Persistence Store for Transaction Recovery |
Propagate the Domain Configuration to the Managed Server Directory in SOAHOST1 and to SOAHOST2 |
Oracle Service Bus requires some updates to the WebLogic Server start scripts. Propagate these changes using the pack and unpack commands. |
Propagating the Extended Domain to the Domain Directories and Machines |
Start the Oracle Service Bus Servers |
Oracle Service Bus servers extend an already existing domain. As a result, the Administration Server and respective Node Managers are already running in SOAHOST1 and SOAHOST2. |
|
Validate the WLS_OSB Managed Servers |
Verify that the server status is reported as Running in the Admin Console and access URLs to verify status of servers. |
|
Configuring Oracle HTTP Server for the WLS_OSBn Managed Servers |
To enable Oracle HTTP Server to route to Oracle Service Bus console and Oracle Service Bus service, set the WebLogicCluster parameter to the list of nodes in the cluster. |
|
Validating Access Through Oracle HTTP Server |
Verify that the server status is reported as Running. |
Validating the Oracle Service Bus URLs Through the Load Balancer |
Enable High Availability for Oracle File and FTP Adapters |
Make Oracle File and FTP Adapters highly available for outbound operations using the database mutex locking operation. |
Enabling High Availability for Oracle DB_ File and FTP Adapters |
Backing up the Oracle Service Bus Configuration |
To back up the domain configuration for immediate restoration in case of failures in future procedures. |
Before extending the current domain, ensure that your existing deployment meets the following prerequisites.
Back up the installation - If you have not yet backed up the existing Fusion Middleware Home and domain, Oracle recommends backing it up now.
To back up the existing Fusion Middleware Home and domain, see Performing Backups and Recoveries in the SOA Enterprise Deployments.
Verify that you have installed the Infrastructure and SOA software binaries in an Oracle home on shared storage and they are available from SOAHOST1 and SOAHOST2.
If Oracle Service Bus is being configured in the same domain as SOA, then the appropriate SOAINFRA schema (used by the wlsbjmsrpDataSource) will be already available. If OSB is being configuerd in its own domain, then you must run RCU to install the SOAINFRA schema in a supported database, using a different schema prefix than the SOAINFRA schema used by the SOA domain.
You have already configured Node Manager, Administration Server, (optionally SOA Servers) and WSM Servers as described in previous chapters to run a SOA system. Optionally, you may have already configured Server migration, transaction logs, coherence, and all other configuration steps for the SOA System.
If you haven't done so already, verify that the system clocks on each host computer are synchronized. You can do this by running the date command as simultaneously as possible on the hosts in each cluster.
Alternatively, there are third-party and open-source utilities you can use for this purpose.
The following topics describe how to install Oracle Service Bus in an enterprise deployment.
To start the installation program, perform the following steps.
Table 13-2 provides description of each installation program screen.
Table 13-2 SOA Installation Screens
Screen | Description |
---|---|
Welcome |
This screen introduces you to the product installer. |
Use this screen to automatically search My Oracle Support for available patches or automatically search a local directory for patches that you’ve already downloaded for your organization. |
|
Installation Location |
Use this screen to specify the location of your Oracle home directory. If you plan to extend the existing SOA domain, then install the OSB software into the existing Oracle home, where the SOA software has already been installed. If you plan to configure OSB in a separate domain, then install the OSB software in the Infrastructure Oracle home. |
Installation Type |
Use this screen to select the type of installation and consequently, the products and feature sets you want to install. For this topology, select Service Bus. |
Prerequisite Checks |
This screen verifies that your system meets the minimum necessary requirements. If there are any warning or error messages, you can refer to one of the following documents in Section 1.4. |
Installation Progress |
This screen allows you to see the progress of the installation. |
Installation Complete |
This screen appears when the installation is complete. Review the information on this screen, then click Finish to dismiss the installer. |
If you have configured a separate shared storage volume or partition for SOAHOST2, then you must also install the software on SOAHOST2. For more information, see Shared Storage Recommendations When Installing and Configuring an Enterprise Deployment.
Note that the location where you install the Oracle home (which contains the software binaries) will vary, depending upon the host. To identify the proper location for you Oracle home directories, refer to the guidelines in File System and Directory Variables Used in This Guide.
After you complete the installation, you can verify it by successfully completing the following tasks.
Review the contents of the installation log files to make sure that no problems were encountered. For a description of the log files and where to find them, see "Understanding Installation Log Files" in Installing Software with the Oracle Universal Installer.
The contents of your installation vary based on the options you selected during the installation.
The addition of Oracle Service Bus adds the following directory and sub-directories:
ORACLE_HOME/osb/
bin
common
config
doc
financial
L10N
lib
osb
plugins
tools
For more information about the directory structure you should see after installation, see "What are the Key Oracle Fusion Middleware Directories?" in Understanding Oracle Fusion Middleware.
You can also view the contents of your Oracle home using the viewInventory
script. For more information, see "Viewing the contents of an Oracle home" in Installing Software with the Oracle Universal Installer.
This section provides instructions for extending the existing enterprise deployment SOA domain with the Oracle Service Bus.
Extending the domain involves the following tasks as described in the following sections.
Note:
If you added any customizations directly to the start scripts in the domain, those will be overwritten by the configuration wizard. To customize server startup parameters that apply to all servers in a domain, you can create a file called setUserOverrides.sh
and configure it, for example, add custom libraries to the WebLogic Server classpath, specify additional java command line options for running the servers, or specify additional environment variables. Any customizations you add to this file are preserved during domain upgrade operations, and are carried over to remote servers when using the pack
and unpack
commands.
To begin domain configuration:
In this step, you extend the domain created in Extending the Domain with Oracle SOA Suite , and add the Oracle Service Bus software components and Managed Servers.
The steps reflected in this section would be very similar if Oracle Service Bus was extending a domain containing only an Administration Server and a WSM-PM Cluster, but some of the options, libraries and components shown in the screens could vary.
Domain creation and configuration includes the following tasks:
Task 1, "Selecting the Domain Type and Domain Home Location"
Task 5, "Providing the GridLink Oracle RAC Database Connection Details"
Task 15, "Reviewing Your Configuration Specifications and Configuring the Domain"
On the Configuration Type screen, select Update an existing domain.
In the Domain Location field, select the value of the ASERVER_HOME variable, which represents the complete path to the Administration Server domain home you created in Creating the Initial Infrastructure Domain for an Enterprise Deployment.
For more information about the directory location variables, see File System and Directory Variables Used in This Guide
Tip:
More information about the other options on this screen can be found in Configuration Type in Creating WebLogic Domains Using the Configuration Wizard.
On the Templates screen, make sure Update Domain Using Product Templates is selected, then select the following template:
Oracle Service Bus - 12.2.1.0 [osb]
Selecting this template automatically selects the following as dependencies:
WebLogic Advanced Web Services for JAX-RPC Extension - 12.2.1 [oracle_common]
ODSI XQuery 2004 Components - 12.1.3.0 [oracle_common]
Note:
There is no 12.2.1 template for ODSI. The 12.1.3 template will work for your 12.2.1 configuration.
In addition, the following additional templates should already be selected, because they were used to create the initial domain:
Oracle Enterprise Manager - 12.2.1.0 [em]
Oracle WSM Policy Manager - 12.2.1.0 [oracle_common]
Oracle JRF - 12.2.1.0 [oracle_common]
WebLogic Coherence Cluster Extension - 12.2.1.0 [wlserver]
All fields are pre-populated, because you already configured the domain to reference the Fusion Middleware schemas that are required for the Infrastructure domain. Verify and ensure that credentials in all the fields are the same that you have provided while configuring Oracle Fusion Middleware Infrastructure.
Click Get RCU Configuration after you finish verifying the database connection information. The following output in the Connection Result Log indicates that the operation succeeded:
Connecting to the database server...OK Retrieving schema data from database server...OK Binding local schema components with retrieved data...OK Successfully Done.
Tip:
More information about the RCU Data option can be found in "Understanding the Service Table Schema" in Creating Schemas with the Repository Creation Utility.
More information about the other options on this screen can be found in "Datasource Defaults" in Creating WebLogic Domains Using the Configuration Wizard.
Select the OSB JMS Reporting Provider component schema, click the Convert to Gridlink option and click Next.
Click Next.
On the GridLink Oracle RAC Component Schema screen, provide the information required to connect to the RAC database and component schemas, as shown in the following table.
Element | Description and Recommended Value |
---|---|
SCAN, Host Name, and Port |
Select the SCAN check box. In the Host Name field, enter the Single Client Access Name (SCAN) Address for the Oracle RAC database. In the Port field, enter the SCAN listening port for the database (for example, |
ONS Host and Port |
In the ONS Host field, enter the SCAN address for the Oracle RAC database. In the Port field, enter the ONS Remote port (typically, |
Enable Fan |
Verify that the Enable Fan check box is selected, so the database can receive and process FAN events. |
On the Test JDBC Data Sources screen, confirm that all connections were successful.
The connections are tested automatically. The Status column displays the results. If all connections are not successful, click Previous to return to the previous screen and correct your entries.
Click Next when all the connections are successful.
On the Select Advanced Configuration screen, select the following:
Managed Servers, Clusters, and Coherence
JMS File Store
Click Next.
On the Managed Servers screen, add the required managed servers for Oracle Service Bus.
Select the automatically created server and click Rename to change the name to WLS_OSB1.
Click Add to add another new server and enter WLS_OSB2 as the server name.
Give servers WLS_OSB1 and WLS_OSB2 the attributes listed in Table 13-3 .
Select OSB-MGD-SVRS-ONLY as the server group for the OSB Servers. Deselect OSB-MGD-SVRS-COMBINED that is selected by default.
In the end, the configuration for the added servers should match Table 13-3 .
Click Next.
Table 13-3 Configuring the Oracle Service Bus Managed Servers in the Configuration Wizard
Name | Listen Address | Listen Port | SSL Listen Port | SSL Enabled | Server Groups |
---|---|---|---|---|---|
WLS_SOA1 |
SOAHOST1 |
8001 |
n/a |
No |
SOA-MGD-SVRS-ONLY |
WLS_SOA2 |
SOAHOST2 |
8001 |
n/a |
No |
SOA-MGD-SVRS-ONLY |
WLS_WSM1 |
SOAHOST1 |
7010 |
n/a |
No |
JRF-MAN-SVR WSMPM-MAN-SVR WSM-CACHE-SVR |
WLS_WSM2 |
SOAHOST2 |
7010 |
n/a |
No |
JRF-MAN-SVR WSMPM-MAN-SVR WSM-CACHE-SVR |
WLS_OSB1 |
SOAHOST1 |
8011 |
n/a |
No |
OSB-MGD-SVRS-ONLY |
WLS_OSB2 |
SOAHOST2 |
8011 |
n/a |
No |
OSB-MGD-SVRS-ONLY |
The WLS_SOA Managed Servers will appear if you are extending an existing Oracle SOA Suite domain with Oracle Service Bus.
In this task, you create a cluster of Managed Servers to which you can target the Oracle SOA Suite software.
You will also set the Frontend Host property for the cluster, which ensures that, when necessary, WebLogic Server will redirect Web services callbacks and other redirects to osb.example.com
on the load balancer rather than the address in the HOST header of each request.
For more information about the osb.example.com
virtual server address, see Configuring Virtual Hosts on the Hardware Load Balancer.
Use the Clusters screen to create a new cluster:
Click the Add button.
Specify OSB_Cluster
in the Cluster Name field.
Specify osb.example.com
in the Frontend Host field.
Specify 80
as the Frontend HTTP Port and 443
as the Frontend HTTPS port.
Note:
By default, server instances in a cluster communicate with one another using unicast. If you want to change your cluster communications to use multicast, refer to "Considerations for Choosing Unicast or Multicast" in Administering Clusters for Oracle WebLogic Server.
Tip:
More information about the options on this screen can be found in Clusters in Creating WebLogic Domains Using the Configuration Wizard.
On the Assign Servers to Clusters screen, assign servers to clusters as follows:
Note that the WLS_SOA Managed Servers will appear only if you are extending an existing Oracle SOA Suite domain with Oracle Service Bus.
SOA_Cluster - If you are extending a SOA domain.
WLS_SOA1
WLS_SOA2
WSM-PM_Cluster:
WLS_WSM1
WLS_WSM2
OSB_Cluster:
WLS_OSB1
WLS_OSB2
Click Next.
Use the Coherence Clusters screen to configure the Coherence cluster that is automatically added to the domain. Leave the port number value at 9991, as it was defined during the initial Infrastructure domain creation.
Confirm that the following entries appear:
Name | Node Manager Listen Address |
---|---|
SOAHOST1 |
SOAHOST1 |
SOAHOST2 |
SOAHOST2 |
ADMINHOST |
ADMINVHN |
Leave all other fields to their default values.
Click Next.
On the Assign Servers to Machines screen, assign servers to machines as follows:
ADMINHOST:
AdminServer
SOAHOST1
WLS_SOA1 (if extending a SOA domain)
WLS_WSM1
WLS_OSB1
SOAHOST2:
WLS_SOA2 (if extending a SOA domain)
WLS_WSM2
WLS_OSB2
Click Next.
Configure the JMS File Stores that were just created during the configuration session (Wsee FileStore
, UMS JMS FileStore
, and FileStore
).
On the JMS File Stores screen, assign the following directory for each of the OSB Persistence stores:
ORACLE_RUNTIM/cluster_name/OSB_Cluster/jms
In this example, replace ORACLE_RUNTIME with the value of the variable for your environment. Replace OSB_Cluster with the name you assigned to the OSB cluster.
Ignore the JMS configuration warning that appears.
The Configuration Summary screen contains the detailed configuration information for the domain you are about to create. Review the details of each item on the screen and verify that the information is correct.
Click Update.
In the Extending Domain screen, click Done.
Start the Administration Server to ensure the changes you have made to the domain have been applied.
Each Managed Server uses a transaction log that stores information about committed transactions that are coordinated by the server and that may not have been completed. Oracle WebLogic Server uses this transaction log for recovery from system crashes or network failures. To leverage the migration capability of the Transaction Recovery Service for the Managed Servers within a cluster, store the transaction log in a location accessible to each Managed Server and its backup server.
Note:
To enable migration of the Transaction Recovery Service, specify a location on a persistent storage solution that is available to other servers in the cluster. All Managed Servers in the cluster must be able to access this directory. This directory must also exist before you restart the server.
The recommended location is a dual-ported SCSI disk or on a Storage Area Network (SAN). Note that it is important to set the appropriate replication and backup mechanisms at the storage level to guarantee protection in cases of a storage failure.
This information applies for file-based transaction logs. You can also configure a database-based persistent store for translation logs. For more information, see Using JDBC Persistent Stores for TLOGs and JMS in an Enterprise Deployment.
To set the location for the default persistence stores:
Log into the Oracle WebLogic Server Administration Console:
ADMINVHN:7001/console
In the Change Center section, click Lock & Edit.
For each of the Managed Servers in the cluster:
In the Domain Structure window, expand the Environment node, and then click the Servers node.
The Summary of Servers page appears.
Click the name of the server (represented as a hyperlink) in Name column of the table.
The settings page for the selected server appears and defaults to the Configuration tab.
On the Configuration tab, click the Services tab.
In the Default Store section of the page, enter the path to the folder where the default persistent stores will store its data files.
For the enterprise deployment, use the ORACLE_RUNTIME directory location. This subdirectory serves as the central, shared location for transaction logs for the cluster. For more information, see File System and Directory Variables Used in This Guide.
For example:
ORACLE_RUNTIME/domain_name/cluster_name/tlogs
Replace cluster_name with the name of the cluster you just created.
Click Save.
Click Save and Activate Changes.
Note:
You will validate the location and the creation of the transaction logs later in the configuration procedure.
After you have extended the domain with the OSB instances, and you have restarted the Administration Server on SOAHOST1, you must then propagate the domain changes to the domain directories and machines.
Note that there is no need to propagate the updated domain to the WEBHOST1 and WEBHOST2 machines, because there are no changes to the Oracle HTTP Server instances on those host computers.
Refer to the following sections for more information.
Table 13-4 summarizes the steps required to propagate the changes to all the domain directories and machines.
Table 13-4 Summary of Tasks Required to Propagate the Domain Chanegs to Domain Directories and Machines
Task | Description | More Information |
---|---|---|
Pack up the Extended Domain on SOAHOST1 |
Use the Pack command to create a new template jar file that contains the new OSB Servers configuration. When you pack up the domain, create a template jar file called |
|
Unpack the Domain in the Managed Servers Directory on SOAHOST1 |
Unpack the template jar file in the Managed Servers directory on SOAHOST1 local storage. |
Unpacking the Domain in the Managed Servers Domain Directory on SOAHOST1 |
Unpack the Domain on SOAHOST2 |
Unpack the template jar file in the Managed Servers directory on the SOAHOST2 local storage. |
After extending the domain, restarting the Administration Server, and propagating the domain to the other hosts, use the following procedure to start the WLS_OSB1 server and validate that it's configured successfully:
Before you validate the Oracle Service Bus configuration on the WLS_OSB1 Managed Server, add the Oracle Service Bus MiddlewareAdministrators
administration role to the enterprise deployment administration group (SOA Administrators
) and add the IntegrationAdministrators
group in the external LDAP directory.
To perform this task, refer to Configuring Roles for Administration of Oracle SOA Suite Products.
Follow similar steps as in the previous section for WLS_OSB2:
After the WLS_OSB1 and WLS_OSB2 Managed Servers are up and running, verify that the transaction log directory and transaction logs were created as expected, based on the steps you performed in Configuring a Default Persistence Store for Transaction Recovery:
ORACLE_RUNTIME/domain_name/OSB_Cluster/tlogs
_WLS_WLS_OSB1000000.DAT
_WLS_WLS_OSB2000000.DAT
Oracle Service Bus uses some services that are singletons and that should run only in one of the WLS servers in the OSB_Cluster.
Verify that the appropriate targeting exists and that the following application is targeted only to WLS_OSB1:
Service Bus Domain Singleton Marker Application
To do this follow these steps:
To configure the Oracle HTTP Server instances in the Web tier so they route requests correctly to the Oracle Service Bus cluster, use the following procedure to create an additional Oracle HTTP Server configuration file that creates and defines the parameters of the soa.example.com virtual server.
This procedure assumes you performed the Oracle HTTP Server configuration tasks described in Configuring Oracle HTTP Server for Administration and Oracle Web Services Manager.
Note:
If you configure any HTTP proxy services, you can start the context paths for the proxy services with a common name to facilitate the routing for all the proxy services. For example:
/osb/project-name/folder-name/proxy-service-name
To set the parameter:
Example 13-1 osb_vh.conf file
<VirtualHost WEBHOST1:7777> ServerName https://osb.example.com:443 ServerAdmin you@your.address RewriteEngine On RewriteOptions inherit <Location /sbinspection.wsil > WLSRequest ON WebLogicCluster SOAHOST1:8011,SOAHOST2:8011 WLProxySSL ON WLProxySSLPassThrough ON </Location> <Location /sbresource > WLSRequest ON WebLogicCluster SOAHOST1:8011,SOAHOST2:8011 WLProxySSL ON WLProxySSLPassThrough ON </Location> <Location /osb > WLSRequest ON WebLogicCluster SOAHOST1:8011,SOAHOST2:8011 WLProxySSL ON WLProxySSLPassThrough ON </Location> <Location /alsb > WLSRequest ON WebLogicCluster SOAHOST1:8011,SOAHOST2:8011 WLProxySSL ON WLProxySSLPassThrough ON </Location> <Location /lwpfconsole > WLSRequest ON WebLogicCluster SOAHOST1:8011,SOAHOST2:8011 WebLogicHost ADMINVHN WeblogicPort 7001 </Location> </VirtualHost>
Example 13-2 admin_vh.conf file
# The admin URLs should only be accessible via the admin virtual host <VirtualHost WEBHOST1:7777> ServerName admin.example.com:80 ServerAdmin you@your.address RewriteEngine On RewriteOptions inherit # Admin Server and EM <Location /console> WLSRequest ON WebLogicHost ADMINVHN WeblogicPort 7001 </Location> <Location /consolehelp> WLSRequest ON WebLogicHost ADMINVHN WeblogicPort 7001 </Location> <Location /em> WLSRequest ON WebLogicHost ADMINVHN WeblogicPort 7001 </Location> <Location /sbconsole > WLSRequest ON WebLogicHost ADMINVHN WeblogicPort 7001 </Location> <Location /servicebus> WLSRequest ON WebLogicHost ADMINVHN WeblogicPort 7001 </Location> </VirtualHost>
Set the WebLogic Plug-In Enabled parameter for the OSB cluster.
Verify the Oracle Service Bus URLs to ensure that appropriate routing and failover is working from the hardware load balancer to the HTTP Server instances to the Oracle Service Bus components.
To verify the URLs:
After you install and configure Oracle Service Bus in the domain, consider the following post-configuration tasks.
Oracle SOA Suite and Oracle Service Bus use the same database, File, and FTP JCA adapters.
You create the required database schemas for these adapters when you use the Oracle Repository Creation Utility before configuring Oracle SOA Suite. The database adapter does not require any configuration at the WebLogic Server resource level.
The required configuration for the other adapters is described in section Enabling High Availability for Oracle File and FTP Adapters.
If you are configuring Oracle Service Bus as an extension of a SOA domain, you do not need to add to the configuration already performed for the adapters.
If you are deploying Oracle Service Bus as an extension to an Oracle Fusion Middleware Infrastructure domain (without Oracle SOA Suite), then you must do the following:
Run RCU to seed the Oracle Service Bus database with the required adapter schemas (Select the SOA Infrastructure schema in RCU).
Perform the steps in Enabling High Availability for Oracle File and FTP Adapters.
To use IBM WebSphere MQ Connection resources and the MQ Transport in Oracle Service Bus, you must add the MQ client libraries to the classpath.
One option is to copy the required MQ libraries to the following location in the domain home directory:
DOMAIN_HOME/lib
This is also the case for custom assertions and JBoss integration services:
When using JBoss initial context factory classes, make sure to include the class and any dependent classes in the DOMAIN_HOME
/lib
directory.
Similarly, for custom assertions, create the required jar file with the assertion and add the jar to the DOMAIN_HOME
/lib
directory.
Further, to use these services in an enterprise deployment, you must add the required libraries to the Administration Server domain home (ASERVER_HOME
/lib
) and the Managed Server domain home (MSERVER_HOME/lib
).
For more information about configuring and developing services for Oracle Service Bus, see Developing Services with Oracle Service Bus.
After you extend the domain with Oracle Service Bus, you should also ensure that the Administration Server and Managed Servers can access the front-end, SSL URL of the hardware load balancer.
This will allow Oracle Service Bus Web services and other services to invoke callbacks and other communications with the front-end, secure URL.
For more information, see Enabling SSL Communication Between the Middle Tier and the Hardware Load Balancer.
It is an Oracle best practices recommendation to create a backup after successfully extending a domain or at another logical point. Create a backup after verifying that the installation so far is successful. This is a quick backup for the express purpose of immediate restoration in case of problems in later steps.
The backup destination is the local disk. You can discard this backup when the enterprise deployment setup is complete. After the enterprise deployment setup is complete, you can initiate the regular deployment-specific Backup and Recovery process.
For information about backing up your configuration, see Performing Backups and Recoveries in the SOA Enterprise Deployments.
To ensure that Oracle Service Bus is configured for high availability, configure the Oracle Service Bus Managed Servers for automatic service migration for failover and zero data loss.
For more information on enabling server migration, see Configuring Automatic Service Migration in an Enterprise Deployment.
For additional high availability, you can also configure your transaction logs store and JMS store in a database. For more information, see Using JDBC Persistent Stores for TLOGs and JMS in an Enterprise Deployment.