After you have installed Oracle Managed File Transfer, you can configure the domain, which you can also extend for high availability.
Refer to the following sections to create the database schemas, configure a WebLogic domain, and verify the configuration:
Before you can configure an Oracle Managed File Transfer domain, you must install required schemas on a certified database for use with this release of Oracle Fusion Middleware.
Before creating the database schemas, you must install and configure a certified database, and verify that the database is up and running.
For more information, see Understanding Database Requirements for an Oracle Fusion Middleware Installation.
Start the Repository Creation Utility (RCU) after verifying that a certified JDK is installed on your system.
To start the RCU:
java -versionfrom the command line. For 12c (220.127.116.11), the certified JDK is 1.8.0_77 and later.
For more information, see Understanding JDK Requirements for an Oracle Fusion Middleware Installation.
JAVA_HOMEenvironment variable is set to the location of the certified JDK. For example:
Enter required information in the RCU screens to create the database schemas.
The Welcome screen is the first screen that appears when you start the RCU.
Use the Create Repository screen to select a method to create and load component schemas into the database.
If you have the necessary permission and privileges to perform DBA activities on your database, select System Load and Product Load. This procedure assumes that you have SYSDBA privileges.
If you do not have the necessary permission or privileges to perform DBA activities in the database, you must select Prepare Scripts for System Load on this screen. This option generates a SQL script that you can give to your database administrator. See About System Load and Product Load in Creating Schemas with the Repository Creation Utility.
If the DBA has already run the SQL script for System Load, select Perform Product Load.
On the Database Connection Details screen, provide the database connection details for the RCU to connect to your database.
If you are unsure of the service name for your database, you can obtain it from the
SERVICE_NAMES parameter in the initialization parameter file of the database. If the initialization parameter file does not contain the
SERVICE_NAMES parameter, then the service name is the same as the global database name, which is specified in the
Click Next to proceed, then click OK in the dialog window that confirms a successful database connections.
Specify a custom prefix and database schema to automatically select dependent schemas.
Select Create new prefix, specify a custom prefix, then select Managed File Transfer schema (under SOA Suite). This will automatically select the following schemas as dependencies:
User Messaging Service
Oracle Platform Security Services
Audit Services Append
Audit Services Viewer
Oracle Enterprise Scheduler
Make a note of the custom prefix you choose to enter here. You will need this later on during the domain creation process.
A schema called Common Infrastructure Services is also automatically created. It is grayed out (you can’t select it or deselect it). This schema enables you to retrieve information from RCU during domain configuration. For more information, see About the Service Table Schema in Creating Schemas with the Repository Creation Utility.
The custom prefix is used to logically group these schemas together for use in this domain only; you must create a unique set of schemas for each domain as schema sharing across domains is not supported.
For more information about custom prefixes, see About Custom Prefixes in Creating Schemas with the Repository Creation Utility.
For more information about how to organize your schemas in a multi-domain environment, see Planning Your Schema Creation in Creating Schemas with the Repository Creation Utility.
Click Next to proceed, then click OK to confirm that prerequisite checking for schema creation was successful.
On the Schema Passwords screen, specify how you want to set the schema passwords on your database, then enter and confirm your passwords.
You must make a note of the passwords you set on this screen; you will need them later on during the domain creation process.
Specify the custom variables for the SOA Infrastructure schema. For the Oracle SOA Suite standard installation topology, accept both default values for the Database Profile (SMALL) and Healthcare Integration (NO).
For more information about the database profile, see Tuning Performance.
More information about the options on this screen can be found in Custom Variables in Creating Schemas with the Repository Creation Utility.
Navigate through the remaining RCU screens to complete schema creation.
On the Map Tablespaces screen, the Encrypt Tablespace check box appears only if you enabled TDE (Transparent Data Encryption) in the database (Oracle or Oracle EBR) when you start the RCU. Select the Encrypt Tablespace check box if you want to encrypt all new tablespaces that the RCU will create.
When you reach the Completion Summary screen, click Close to dismiss the RCU.
Use the Configuration Wizard to create and configure a domain.
For information on other methods to create domains, see Additional Tools for Creating, Extending, and Managing WebLogic Domains in Creating WebLogic Domains Using the Configuration Wizard.
Start the Configuration Wizard to begin configuring a domain.
To start the Configuration Wizard:
ORACLE_HOME is your 12c (18.104.22.168) Oracle home.
Enter required information in the Configuration Wizard screens to create and configure the domain for the topology.
You can use this procedure to extend an existing domain. If your needs do not match the instructions in the procedure, be sure to make your selections accordingly, or see the supporting documentation for more details.
You must select a Domain home directory location, optimally outside the Oracle home directory.
To specify the Domain type and Domain home directory:
Note:If MFT shares the node with SOA, the Domain home directory must be different. You can use
For more information about this screen, see Configuration Type in Creating WebLogic Domains Using the Configuration Wizard.
Use the Templates screen to select the templates you require.
On the Templates screen, make sure Create Domain Using Product Templates is selected, then select the following template:
Oracle Managed File Transfer - 22.214.171.124.0 [mft]
Selecting this template automatically selects the following as dependencies:
Oracle B2B Client
Oracle Enterprise Manager
Oracle WSM Policy Manager
WebLogic Coherence Cluster Extension
For more information about this screen, see Templates in Creating WebLogic Domains Using the Configuration Wizard.
Use the Application Location screen to select the location to store applications associated with your domain, also known as the Application home directory.
Oracle recommends that you locate your Application home in accordance with the directory structure in What Are the Key Oracle Fusion Middleware Directories? in Understanding Oracle Fusion Middleware, where the Application home is located outside the Oracle home directory. This directory structure helps avoid issues when you need to upgrade or re-install your software.
Use the Administrator Account screen to specify the user name and password for the default WebLogic Administrator account for the domain.
Oracle recommends that you make a note of the user name and password that you enter on this screen; you need these credentials later to boot and connect to the domain's Administration Server.
Tip:For more information about this screen, see Administrator Account in Creating WebLogic Domains Using the Configuration Wizard.
Use the Domain Mode and JDK screen to specify the domain mode and Java Development Kit (JDK).
On the Domain Mode and JDK screen:
Select Production in the Domain Mode field.
Select the Oracle HotSpot JDK in the JDK field.
For more information about this screen, see Domain Mode and JDK in Creating WebLogic Domains Using the Configuration Wizard.
Use the Database Configuration type screen to specify details about the database and database schema.
On the Database Configuration type screen, select RCU Data. This option instructs the Configuration Wizard to connect to the database and Service Table (STB) schema to automatically retrieve schema information for schemas needed to configure the domain.
If you select Manual Configuration on this screen, you must manually fill in parameters for your schema on the next screen.
After selecting RCU Data, fill in the following fields:
Enter the database DBMS name, or service name if you selected a service type driver.
Enter the name of the server hosting the database.
Enter the port number on which the database listens.
Enter the username and password for connecting to the database's Service Table schema. This is the schema username and password entered for the Service Table component on the Schema Passwords screen in the RCU (see Specifying Schema Passwords).
The default username is
Click Get RCU Configuration when you finish specifying the database connection information. The following output in the Connection Result Log indicates that the operation succeeded:
Connecting to the database server...OK Retrieving schema data from database server...OK Binding local schema components with retrieved data...OK Successfully Done.
Use the JDBC Component Schema screen to verify or specify details about the database schemas.
Verify that the values populated on the JDBC Component Schema screen are correct for all schemas. If you selected RCU Data on the previous screen, the schema table should already be populated appropriately.
For high availability environments, see the following sections in High Availability Guide for additional information on configuring data sources for Oracle RAC databases:
For more information about this screen, see JDBC Component Schema in Creating WebLogic Domains Using the Configuration Wizard.
Use the JDBC Component Schema Test screen to test the data source connections.
A green check mark in the Status column indicates a successful test. If you encounter any issues, see the error message in the Connection Result Log section of the screen, fix the problem, then try to test the connection again.
By default, the schema password for each schema component is the password you specified while creating your schemas. If you want different passwords for different schema components, manually edit them in the previous screen (JDBC Component Schema) by entering the password you want in the Schema Password column, against each row. After specifying the passwords, select the check box corresponding to the schemas that you changed the password in and test the connection again.
For more information about this screen, see JDBC Component Schema Test in Creating WebLogic Domains Using the Configuration Wizard .
Use the Keystore screen to specify either the path to the trusted certificate for each keystore, or the path to each keystore’s private key and other private key information.
When you click in the Trusted Certificate, Private Key, or Identity Certificate fields, a browse icon appears to the right of the field. Click this icon to browse to the appropriate file.
For more information about this screen, see Keystore in Creating WebLogic Domains Using the Configuration Wizard .
Use the Advanced Configuration screen to complete the domain configuration.
On the Advanced Configuration screen, select:
Required to properly configure the listen address of the Administration Server.
Required to configure Node Manager.
Required to configure the Oracle Managed File Transfer Managed Server.
Optionally, select other available options as required for your desired installation environment. The steps in this guide describe a standard installation topology, but you may choose to follow a different path. If your installation requirements extend to additional options outside the scope of this guide, you may be presented with additional screens to configure those options. For information about all Configuration Wizard screens, see Configuration Wizard Screens in Creating WebLogic Domains Using the Configuration Wizard.
Use the Administration Server screen to select the IP address of the host.
Select the drop-down list next to Listen Address and select the IP address of the host where the Administration Server will reside, or use the system name or DNS name that maps to a single IP address. Do not use
All Local Addresses.
Do not specify any server groups for the Administration Server.
Use the Node Manager screen to select the type of Node Manager you want to configure, along with the Node Manager credentials.
Select Per Domain Default Location as the Node Manager type, then specify Node Manager credentials.
Use the Managed Servers screen to configure Managed Servers.
On the Managed Servers screen, a new Managed Server named
mft_server1 is automatically created by default.
All Local Addresses.
There is another server group called MFT-MGD-SVRS-ONLY that targets only Oracle Managed File Transfer but not Oracle Web Services Manager (OWSM) to the server. This is typically used if you want to have Oracle Web Services Manager (OWSM) in a different server rather than with the MFT server.
Server groups target Fusion Middleware applications and services to one or more servers by mapping defined application service groups to each defined server group. A given application service group may be mapped to multiple server groups if needed. Any application services that are mapped to a given server group are automatically targeted to all servers that are assigned to that group. For more information, see Application Service Groups, Server Groups, and Application Service Mappings in Domain Template Reference.
Click Add and select MFT-MGD-SVRS to create a second Managed Server named
For more information about the high availability standard topology, see About the Fusion Middleware Standard HA Topology in High Availability Guide.
For more information about the next steps to prepare for high availability after your domain is configured, see Preparing Your Environment for High Availability.
These server names are referenced in examples throughout this document; if you choose different names be sure to replace them as needed.
For more information about this screen, see Managed Servers in Creating WebLogic Domains Using the Configuration Wizard.
Use the Clusters screen to create a new cluster.
On the Clusters screen:
mft_cluster1in the Cluster Name field.
By default, server instances in a cluster communicate with one another using unicast. If you want to change your cluster communications to use multicast, see Considerations for Choosing Unicast or Multicast in Administering Clusters for Oracle WebLogic Server.
You can also create clusters using Fusion Middleware Control. In this case, you can configure cluster communication (unicast or multicast) when you create the new cluster. For more information, see Create and configure clusters in Oracle WebLogic Server Administration Console Online Help.
For more information about this screen, see Clusters in Creating WebLogic Domains Using the Configuration Wizard.
Use the Assign Servers to Clusters screen to assign Managed Servers to a new configured cluster. A configured cluster is a cluster you configure manually. You do not use this screen if you are configuring a dynamic cluster, a cluster that contains one or more generated server instances that are based on a server template.
For more on configured cluster and dynamic cluster terms, see About Dynamic Clusters in Understanding Oracle WebLogic Server.
On the Assign Servers to Clusters screen:
mft_cluster1by doing one of the following:
Click once on
mft_server1 to select it, then click the right arrow to move it beneath the selected cluster (
mft_cluster1) in the Clusters pane.
mft_server1 to move it beneath the selected cluster (
mft_cluster1) in the Clusters pane.
Figure 4-1 Managed Servers Assigned to Clusters
For more information about this screen, see Assign Servers to Clusters in Creating WebLogic Domains Using the Configuration Wizard.
Use the Coherence Clusters screen to configure the Coherence cluster.
Leave the default port number as the Coherence cluster listen port. After configuration, the Coherence cluster is automatically added to the domain.
Setting the unicast listen port to
0 creates an offset for the Managed Server port numbers. The offset is
5000, meaning the maximum allowed value that you can assign to a Managed Server port number is
60535, instead of
See Table 5-2 for more information and next steps for configuring Coherence.
For Coherence licensing information, see Oracle Coherence Products in Licensing Information.
Use the Machines screen to create new machines in the domain. A machine is required so that Node Manager can start and stop servers.
If you plan to create a high availability environment and know the list of machines your target topology requires, you can follow the instructions in this section to create all the machines at this time. For more information, see Optional Scale Out Procedure in High Availability Guide.
You must select a specific interface and not
localhost. This allows Coherence cluster addresses to be dynamically calculated.
If you are extending an existing domain, you can assign servers to any existing machine. It is not necessary to create a new machine unless your situation requires it.
For more information about this screen, see Machines in Creating WebLogic Domains Using the Configuration Wizard.
Use the Assign Servers to Machines screen to assign the Administration Server and Managed Servers to the new machine you just created.
On the Assign Servers to Machines screen:
mft_machine1by doing one of the following:
Click once on
AdminServer to select it, then click the right arrow to move it beneath the selected machine (
mft_machine1) in the Machines pane.
AdminServer to move it beneath the selected machine (
mft_machine1) in the Machines pane.
Figure 4-2 Assign Managed Servers to Machines
For more information about this screen, see Assign Servers to Machines in Creating WebLogic Domains Using the Configuration Wizard.
If you have a WebLogic Server Multitenant (MT) environment, you use the Virtual Targets screen to add or delete virtual targets. For this installation (not a WebLogic Server MT environment), you do not enter any values; just select Next.
Tip:For more information about this screen, see Virtual Targets in Creating WebLogic Domains Using the Configuration Wizard.
The Partitions screen is used to configure partitions for virtual targets in WebLogic Server Multitenant (MT) environments. Select Next without selecting any options.
Tip:For more information about this screen, see Partitions in Creating WebLogic Domains Using the Configuration Wizard.
The Configuration Summary screen shows detailed configuration information for the domain you are about to create.
Review each item on the screen and verify that the information is correct. To make any changes, go back to a screen by clicking the Back button or selecting the screen in the navigation pane. Domain creation does not start until you click Create.
For more information about this screen, see Configuration Summary in Creating WebLogic Domains Using the Configuration Wizard.
The End of Configuration screen shows information about the domain you just configured.
Make a note of the following items because you need them later:
Administration Server URL
You need the domain location to access scripts that start Node Manager and Administration Server, and you need the URL to access the Administration Server.
Click Finish to dismiss the Configuration Wizard.
After configuration is complete, start Node Manager, then the WebLogic Administration Server and Managed Servers.
For more information on additional tools you can use to manage your domain, see Overview of Oracle Fusion Middleware Administration Tools in Administering Oracle Fusion Middleware.
Go to the
Enter the following command:
nm.out as an example output file:
nohup ./startNodeManager.sh > LOG_DIR/nm.out&
LOG_DIR is the location of directory in which you want to store the log files.
On Windows operating systems, Oracle recommends that you configure Node Manager to run as a startup service. This allows Node Manager to start up automatically each time the system is restarted.
See Running Node Manager as a Startup Service in Administering Node Manager for Oracle WebLogic Server.
Go to the
Enter the following command:
If you selected Production Mode on the Domain Mode and JDK screen when you created the domain, you see a prompt for the Administrator user login credentials as provided on the Administrator Account screen.
For more information about starting the Administration Server, see Starting and Stopping Administration Server in Administering Oracle Fusion Middleware.
In production mode, a boot identity file can be created to bypass the need to provide a user name and password when starting the Administration Server. For more information, see Creating a Boot Identity File for an Administration Server in Administering Server Startup and Shutdown for Oracle WebLogic Server.
You can verify that the Administration Server is up and running by accessing the Administration Server Console. The URL is provided on the End of Configuration screen (
http://administration_server_host:administration_server_port/console). The default Administration Server port number is
Make sure that the database hosting your product schemas is up and running and accessible by the Administration Server.
For more information about how to use the Administration Console, see Getting Started Using Oracle WebLogic Server Administration Console in Administering Oracle Fusion Middleware.
To start the Managed Servers:
The Administration Server host and port number were in the URL on the End of Configuration screen (Writing Down Your Domain Home and Administration Server URL). The default Administration Server port number is
The login credentials were provided on the Administrator Account screen (Configuring the Administrator Account).
Select the first Managed Server.
After completing all configuration steps, you can perform additional steps to verify that your domain is properly configured.
To verify that the domain is configured properly, see Performing Additional Domain Configuration Tasks.