Preface |
The Netra CT Server Service Manual contains procedures for the removal and replacement of the field-replaceable units (FRUs) in a Netra CT server.
The intended reader of this manual is a service provider or experienced system administrator who has experience installing hardware--systems and components--and has used the Solaris operating environment. The reader should be comfortable with LAN fundamentals and with networking in general.
Before performing the procedures described in this book, you should have completed the installation and setup of the Netra CT server as described in the Netra CT Server Installation Guide.
All Netra CT servers are shipped with the Netra CT Server Safety and Compliance Manual, which specifies the environmental and electrical safety requirements for the product and contains compliance certification for various countries.
P A R T I - Preparing for Service P A R T I - Preparing for Service"
Chapter 1 describes the procedures you need to perform before installing, removing, or replacing field-replaceable units (FRUs) in a Netra CT server.
Chapter 2 gives the hardware and software procedures for powering the Netra CT server on and off.
Chapter 3 provides instructions for handling the cPCI cards and assemblies correctly.
P A R T II - Troubleshooting the System P A R T II - Troubleshooting the System"
Chapter 4 provides troubleshooting procedures for the Netra CT server.
P A R T III - Replacing Hot-Swappable FRUs P A R T III - Replacing Hot-Swappable FRUs"
Chapter 5 describes the hot-swap software commands.
Chapter 6 gives instructions for removing and replacing hot-swappable cards.
Chapter 7 contains instructions for removing and replacing hard disk drives and removable media.
Chapter 8 gives instructions for removing and replacing hot-swappable subassemblies.
P A R T IV - Replacing Cold-Swappable FRUs P A R T IV - Replacing Cold-Swappable FRUs"
Chapter 9 provides instructions for removing and replacing the Netra CT 810 server and Netra CT 410 server.
Chapter 10 gives instructions for removing and replacing cold-replaceable subassemblies.
P A R T V - Illustrated Parts Breakdown P A R T V - Illustrated Parts Breakdown"
Chapter 11 gives the illustrated parts breakdown for the Netra CT server.
P A R T VI - Appendixes, Glossary, and Index P A R T VI - Appendixes, Glossary, and Index"
Appendix A lists the connector pinouts for the cards in the Netra CT server.
Appendix B provides instructions for connecting a terminal console to the server.
Appendix C gives the error messages for the Netra CT server.
Appendix D gives the system specifications for the Netra CT server.
This document contains only limited information on basic UNIX® commands and procedures such as shutting down the system, booting the system, and configuring devices.
See one or more of the following for this information:
The names of commands, files, and directories; on-screen computer output |
||
What you type, when contrasted with on-screen computer output |
||
Read Chapter 6 in the User's Guide. |
||
The Netra CT server documentation is listed in the following table:
You may want to refer to documentation on the following software for additional information: the Solaris operating environment, the ChorusOS environment, and the Netra High Availability (HA) Suite.
You can view, print, or purchase a broad selection of Sun documentation, including localized versions, at:
http://www.sun.com/documentation
If you have technical questions about this product that are not answered in this document, go to:
http://www.sun.com/service/contacting
Sun is interested in improving its documentation and welcomes your comments and suggestions. You can submit your comments by going to:
http://www.sun.com/hwdocs/feedback
Please include the title and part number of your document with your feedback:
Netra CT Server Service Manual, part number 816-2482-11
Copyright © 2003, Sun Microsystems, Inc. All rights reserved.