Communicating With the ILOM and the System Console
About ILOM SP IP Addresses and the ILOM Interfaces
How to Get the SP IP Address by Using the BIOS Setup Utility
How to Get the SP IP Address by Using a Serial Connection and the CLI
How to Connect to the ILOM CLI Using the Serial Management Port
How to Connect to the ILOM Web Interface
Connecting to the System Console
How to Connect to the Server Locally (Physical Console)
How to Connect to the Host's Serial Console Using the ILOM Command-Line Interface
How to Connect Remotely Using the ILOM Web Interface
Before You Begin
Perform the hardware setup as described in the hardware setup documentation.
Apply standby power to the server by connecting AC power to the system power supply. See How to Apply Standby Power for Initial Service Processor Configuration.
ssh -l root sp_ip_address
The default user name is root and the default password is changeme.