Communicating With the ILOM and the System Console
How to Get the SP IP Address by Using the BIOS Setup Utility
How to Get the SP IP Address by Using a Serial Connection and the CLI
How to Connect to the ILOM CLI Using the Serial Management Port
How to Connect to the ILOM CLI Using SSH
How to Connect to the ILOM Web Interface
Connecting to the System Console
How to Connect to the Server Locally (Physical Console)
How to Connect to the Host's Serial Console Using the ILOM Command-Line Interface
How to Connect Remotely Using the ILOM Web Interface
The ILOM SP is assigned a DHCP IP address by default. There are two requirements for DHCP IP address assignment to occur:
Connection to your network must be through one of the NET MGT ports.
DHCP services must be present on your network infrastructure.
If a DHCP server cannot be reached after three DHCP requests, the ILOM SP is assigned a static IP address based on the network management port MAC address. This IP address is always in the format 192.168.xxx.xxx.