JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Fire X4800 Server Product Documentation
search filter icon
search icon

Document Information

Using This Documentation

Hardware Installation

Operating System Installation

Administration, Diagnostics, and Service

ILOM Supplement

Overview of the ILOM Supplement

Introduction to Oracle ILOM Software

ILOM Documentation Overview

ILOM Software Overview

What Does ILOM Do?

How to Access the Console

How to Access the Console

How To Access the System Console Directly

How To Access the System Console Remotely Using the ILOM CLI

How to Connect Remotely Using the ILOM Web Interface

Updating Firmware

Firmware Versions Worksheet

Determining Current Firmware Versions

How to Verify the ILOM and BIOS Firmware Versions Using the Web Interface

How to Verify the ILOM and BIOS Firmware Versions Using the Command-Line Interface Through the Serial Port

How to Verify the ILOM and BIOS Firmware Versions Using the Command--Line Interface Through the Management Ethernet Port

How to Verify the LSI HBA Firmware Version

Preparing for the Firmware Update

How to Plan the Firmware Update

How to Download Firmware Updates

Updating the ILOM and System BIOS

How to Update the ILOM and System BIOS Using the Web Interface

How to Update the ILOM and System BIOS Using the Command-Line Interface

Updating the Embedded HBA BIOS

How to Update the LSI Firmware Using the Remote Console Method

How to Update the LSI Firmware Using the Local Method

Indicators, Sensors, and Traps

Indicators

Sensors

SNMP and PET Traps

Index

Indicators

These values represent the state of LEDs on the chassis and other system components.

Sensor
Description
OK

The state of the green OK LED:

  • ON – system power is on.
  • Fast-Blink – SP is booting. System not ready to turn on.

  • Slow-Blink – Host is booting

  • Stand-By – System power is off.

  • OFF – G5 system power is not connected.

SERVICE

The state of the amber SERVICE LED:

  • ON – The system has a fault
  • OFF – System does not have a fault.

TEMPFAIL

The state of the amber chassis temperature failure LED:

  • ON – The system is outside of normal operating temperature and power-on is not allowed.
  • OFF – The system is within normal operating temperature range and power-on is allowed.

LOCATE

The state of the white locate LED:

  • Fast Blink – The locate LED is blinking (to identify the system)
  • OFF – The locate LED is not blinking


Note - For all NEM indicators, n = 0 or 1.


NEMn/OK

The state of the NEM's green LED:

  • ON – The NEM is ON
  • OFF – The NEM is OFF

NEMn/SERVICE

The state of the NEM's amber LED:

  • ON – The NEM has a fault
  • OFF – The NEM does not have a fault

NEMn/OK2RM

The state of the NEM's blue LED:

  • ON – The NEM is ready to be removed
  • OFF – The NEM is not ready to be removed

NEMn/LOCATE

The state of the NEM's locate button/LED:

  • ON – The NEM's locate LED is ON
  • OFF – The NEM's locate LED is OFF

FMn/SERVICE

The state of the fan module and its amber LED. n = 0 — 3:

  • ON – The LED is ON and the fan module has a fault
  • OFF – The LED is OFF and the fan module does not have a fault


Note - For all HDDs indicators, n = 0 through 7.


DBP/HDDn/SVC

The state of the HDD and its amber LED.

  • ON – The HDD has a fault
  • OFF – The HDD has no faults

DBP/HDDn/OK2RM

The state of the blue Ok to Remove LED on the HDD:

  • ON – the HDD is ready to remove
  • OFF – the HDD is not ready to be removed


Note - For all processor module indicators, n = 0 through 3.


BLn/OK

The state of the green OK LED on the processor module:

  • ON – the processor module is running
  • Slow-blink – the processor module is booting

  • OFF – the processor module is offline

BLn/SERVICE

The state of the amber SERVICE LED on the processor module:

  • ON – the processor module has a fault
  • OFF – the processor module does not have a fault

BLn/OK2RM

The sate of the blue OK to Remove LED on the processor module:

  • ON – the processor module is ready to be removed
  • OFF – the processor module is not ready to be removed

BLn/LOCATE

The state of the LOCATE button/white LED on the processor module:

  • Fast Blink – the LOCATE LED is blinking
  • OFF – the LOCATE LED is OFF

BLn/FMODx/SVC

The state of the SERVICE LED on the processor module's fan module (x = 0 or 1):

  • ON – the fan module has a fault
  • OFF – the fan module does not have a fault

BLn/Px/SVC

The state of the red SERVICE LED for the CPU on the processor module (x = 0 or 1)

  • ON – the CPU has a fault
  • OFF – the CPU does not have a fault

BLn/Px/Dy/SVC

The state of the SERVICE LED for one of the DIMMs on the processor module, where:

  • x identifies CPU 0 or CPU 1
  • y identifies DIMM 0 through DIMM 15.

The values are:

  • ON – the DIMM has a fault

  • OFF – the DIMM does not have a fault