|Skip Navigation Links|
|Exit Print View|
|Sun Blade 6000 Virtualized Multi-Fabric 10GE M2 Network Express Module Documentation Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Documentation Library|
Note - The information in this section is intended as a guideline for configuring network interfaces for the hxge driver. For more detailed information, refer to the administrative documentation for the Linux version that you have installed.
Before using the NEM Hydra 10GbE network interface, you must first configure the network interface. Use the ifconfig(8) command to control the primary network interface options and values for any given network device (such as eth2 for the Virtualized M2 NEM as demonstrated in the installation section). At a minimum, you must assign a network (TCP) IP address and netmask to each network interface.
This section covers the following topics: