Configuring the Domain Network Information

1. Log in to the SSP as superuser.

2. Manually edit the /etc/hosts file to include the IP address of the new domain.

   The correct entries would look similar to the following /etc/hosts sample:

   ---

   129.153.49.185  tacos
   127.0.0.1       localhost
   129.153.49.179  snax-ssp vegetables   loghost
   129.153.49.181  snax-cb0
   129.153.49.182  snax-cb1
   129.153.49.180  pizza
   129.153.49.183  chips
   129.153.49.1    marvin-49
   110.0.0.1       vegetables-priv
   110.0.0.5       chips-priv

   ---

   The /etc/hosts file is actually a link to ./inet/hosts.

   ---

   Caution -

   If the new domain entry follows any other host or SSP entry, the add_install_client command may not work in Step 1 in "Preparing the SSP for the Fresh Install".

   ---

3. Manually edit the /etc/ethers file to include the Ethernet address of the new domain.

   The correct entries would look similar to the following /etc/ethers sample:

   ---

   8:0:20:87:58:a5         snax-ssp vegetables
   0:0:be:01:00:1e         snax-cb0
   0:0:be:01:00:57         snax-cb1
   0:0:be:a6:50:2f         pizza
   0:0:be:a6:6f:19         chips-priv
   0:0:be:a6:6f:23         nachos
   0:0:be:a6:6f:2a         tacos

   ---