Index |
AC power supply/fan module, 1U
installing, 1
removing, 1
AC power supply/fan module, 2U
installing, 1
removing, 1
installing, 1
auto-assign global spare drive, 1
auto-detect drive swap check time, 1
automatic rebuild, 1
expiration information, 1
setting, 1
labels, 1
operation, 1
critical, 1
degraded, 1
status indicators, 1
replacing, 1
replacing, 1
chassis FRU (SCSI), installing, 1, 2
for Sun StorEdge 3510 FC arrays, 1
configuration settings, saving NVRAM configuration settings, 1
convert a single controller to dual-controller array, 1
controller module (FC), See I/O controller module
convert a dual-controller to single controller array, 1, 2
convert a single controller to dual-controller array, 1, 2
dual-controller array replacement, 1, 2
replacing 4.1x with 3.25, 1
replacing with power off, 1, 2
single-controller array replacement, 1, 2
converting rack-ready to tabletop array, 1
converting tabletop to rack-ready array, 1
DC power supply/fan module, 1U
installing, 1
removing, 1
DC power supply/fan module, 2U
installing, 1
removing, 1
assigning as spare, 1
defective drives in a JBOD array, 1
defective drives in a RAID array, 1
identifying defective drives, 1
installing, 1
removing defective drives, 1
replacing, 1
scanning, 1
drive swap check time, 1
dual controller RAID array, 1
installing, 1
removing, 1
replacing, 1
fan module, 1U, 1
fan module, 2U, 1
converting to an FC RAID array, 1
managing, 1
monitoring, 1
filler panel (SCSI), installing, 1
automatic, 1
flash all But selected drives command, 1
installing, 1
for Sun StorEdge 3120 SCSI arrays, 1
for Sun StorEdge 3310 SCSI arrays, 1
for Sun StorEdge 3320 SCSI arrays, 1
for Sun StorEdge 3510 FC arrays, 1
for Sun StorEdge 3511 SATA arrays, 1
global spare drive, 1
convert a dual-controller to single controller array, 1
dual-controller array replacement, 1
installing, 1
removing, 1
replacing, 1
replacing 4.1x with 3.27, 1
single-controller array replacement, 1
installing, 1
removing, 1
replacing, 1
installing, 1
installing gaskets, 1
removing, 1
replacing, 1
installing, 1
removing, 1
Identifying SCSI drive command, 1
FRUs, 1
spares, 1
convert to a RAID array, 1
dual-bus config maintenance, 1
older dual-bus maintenance, 1
using external terminators, 1
installing, 1
removing, 1
installing, 1
removing, 1
REBUILDING, 1
NVRAM configuration settings, 1, 2, 3
power specifications, 1
power supply, 1U, 1
DC, 1
power supply, 2U, 1
AC, 1
DC, 1
power-up sequence, 1
REBUILDING, 1
saving NVRAM configuration, 1, 2
installing, 1
SFPs, installing, 1
show battery status command, 1
show redundancy-mode command, 1
assigning, 1
installing, 1
adding, 1
removing, 1
installing, 1
removing, 1
replacing, 1
Copyright © 2007, Dot Hill Systems Corporation. All rights reserved.