| | | |
A |
|
| accéder à des répertoires, répertoire JumpStart ( ) |
|
| accès aux répertoires, répertoire JumpStart ( ) |
|
| activation d'un environnement d'initialisation |
| | description ( ) |
| | description de la synchronisation de fichiers ( ) |
| | panne, description ( ) |
| | tâches ( ) |
|
| add_install_client, description ( ) |
|
| add_to_install_server, description ( ) |
|
| adresses IP |
| | mot-clé de règle ( ) ( ) |
| | mot-clé de sonde ( ) |
| | préconfiguration ( ) |
| | préconfiguration d'une route par défaut ( ) |
| | spécification d'une route par défaut ( ) ( ) |
|
| AES clé de chiffrement |
| | installation |
| | | avec la commande set-security-key ( ) |
|
| affichage |
| | de la valeur de la clé de chiffrement avec la commande wanbootutil ( ) |
| | de la valeur de la clé de hachage avec la commande wanbootutil ( ) |
| | des systèmes de fichiers montés ( ) |
| | ligne tip et installation JumpStart personnalisée ( ) ( ) |
|
| afficher |
| | informations système ( ) |
| | le nom de l'environnement d'initialisation Live Upgrade ( ) |
| | le nom de la plate-forme ( ) |
| | les systèmes de fichiers partagés ( ) |
|
| ajout |
| | clients sans données |
| | | pour une installation PXE ( ) |
| | clusters au cours de la mise à niveau ( ) |
| | d'une configuration de serveur d'installation |
| | | à l'aide du CD ( ) |
| | de clients sans données |
| | | à l'aide du CD ( ) |
| | de fichiers à l'aide d'un script de fin ( ) |
| | de packages à des groupes de logiciels ( ) |
| | de packages et de patchs à l'aide d'un script de fin ( ) |
| | de règles dans un fichier de règles ( ) |
| | de systèmes à partir du réseau ( ) ( ) |
| | entrées dans le tableau locale.org_dir ( ) |
|
| ajout de |
| | clients sans données |
| | | à l'aide d'un DVD ( ) |
|
| ajouter |
| | des packages de groupes de logiciels ( ) |
| | une configuration du serveur d'installation |
| | | à l'aide du DVD ( ) |
|
| algorithme de consensus majoritaire ( ) |
|
| alias de périphérique net |
| | vérification et réinitialisation ( ) ( ) |
|
| analyse de la surface des disques IDE ( ) |
|
| analyseur de patchs ( ) |
|
| ancre autorisée |
| | Voir certificat de confiance | |
|
| annuler une tâche Solaris Live Upgrade ( ) |
|
| any |
| | mot-clé de règle |
| | | description et valeurs ( ) ( ) |
| | mot-clé de sonde |
| | | description et valeurs ( ) |
|
| archive |
| | Voir aussi scripts | |
| | administration ( ) |
| | commande flar create ( ) |
| | comparaison avec d'autres méthodes d'installation ( ) |
| | compression ( ) |
| | création d'une archive |
| | | conditions requises pour les plates-formes ( ) |
| | | différentielle ( ) ( ) |
| | | exemples ( ) ( ) |
| | | installation et initialisation via connexion WAN ( ) |
| | | installation initiale ( ) |
| | description ( ) |
| | exemple de profil d'initialisation via connexion WAN ( ) |
| | exemple de profil JumpStart ( ) ( ) ( ) ( ) |
| | installation |
| | | avec initialisation via connexion WAN ( ) |
| | | comment installer ( ) |
| | | description ( ) |
| | | JumpStart personnalisée ( ) |
| | | méthodes d'installation ( ) |
| | | Programme suninstall de Solaris, SPARC ( ) |
| | | Programme suninstall de Solaris, x86 ( ) |
| | | Solaris Web Start, SPARC ( ) |
| | | Solaris Web Start, x86 ( ) |
| | | sur l'environnement d'initialisation Live Upgrade ( ) |
| | | sur un environnement d'initialisation vide ( ) |
| | liste des tâches ( ) |
| | mise à jour d'un clone |
| | | description ( ) |
| | mots-clés |
| | | description ( ) |
| | | JumpStart personnalisé ( ) |
| | | section_begin and section_end ( ) |
| | | section d'identification ( ) |
| | | utilisateur ( ) |
| | obtention d'informations ( ) |
| | personnalisation |
| | | contenant des scripts ( ) |
| | | description ( ) |
| | planification |
| | | création d'une archive ( ) |
| | | création d'une archive différentielle ( ) |
| | | installation d'une archive ( ) |
| | planification d'un |
| | | système maître ( ) |
| | sections |
| | | cookie de l'archive, description ( ) |
| | | création ( ) |
| | | description ( ) ( ) |
| | | fichiers des archives, description ( ) |
| | | identification de l'archive, description ( ) |
| | | manifest, description ( ) |
| | | récapitulatif, description ( ) |
| | | utilisateur, description ( ) |
| | stockage dans le répertoire document racine pour l'installation et initialisation via connexion WAN ( ) |
|
| archive différentielle |
| | Voir aussi archive | |
| | création ( ) |
| | création, à l'aide de Solaris Live Upgrade ( ) |
| | description ( ) |
| | planification ( ) |
|
| archives Solaris Flash |
| | Voir archive | |
|
| attaques de déni de service, avec les installations et initialisations via connexion WAN ( ) |
|
| authentification, configuration d'une installation et initialisation via connexion WAN ( ) |
|
| authentification client, configuration d'une installation et initialisation via connexion WAN ( ) |
|
| authentification client et serveur |
| | configuration d'une installation et initialisation via connexion WAN ( ) ( ) |
| | configuration en vue d'une installation et initialisation via connexion WAN ( ) |
|
| authentification serveur, configuration d'une installation et initialisation via connexion WAN ( ) |
|
| autorisations |
| | répertoire /etc/netboot ( ) |
| | répertoire JumpStart ( ) |
| | scripts de début ( ) |
| | scripts de fin ( ) |
|
| autres programmes d'installation ( ) |
|
| avant installation JumpStart personnalisée, description ( ) |
| | | |
C |
|
| -c option, commande add_install_client ( ) |
|
| carte en anneau à jeton, erreur d'initialisation avec ( ) |
|
| carte graphique, préconfiguration ( ) |
|
| certificat de confiance |
| | création à partir du fichier PKCS#12 ( ) |
| | insertion dans le fichier truststore ( ) ( ) |
| | utilisation pour l'authentification serveur ( ) |
|
| certificats |
| | Voir certificats numériques | |
|
| certificats numériques |
| | description ( ) ( ) |
| | exigences pour une installation et initialisation via connexion WAN ( ) |
| | préparation à des installations et initialisations via connexion WAN ( ) |
| | préparation en vue d'installations et initialisations via connexion WAN ( ) ( ) |
| | protection de données lors de l'installation et initialisation via connexion WAN ( ) |
|
| champ de règle && ("et" commercial) ( ) |
|
| champ de règle de début, description ( ) |
|
| champ de règle de fin, description ( ) |
|
| champ de règle ET ( ) |
|
| champ de règle mot_clé_règle ( ) |
|
| champ de règle opérateur logique ET ( ) |
|
| champ de règle point d'exclamation (!) ( ) |
|
| champ de règle valeur_règle ( ) |
|
| changer le nom d'un environnement d'initialisation Solaris Live Upgrade ( ) |
|
| chemins |
| | script check ( ) ( ) |
|
| chiffement des données au cours d'une installation et initialisation via connexion WAN, avec clé privée ( ) |
|
| chiffrement de données au cours d'une installation et initialisation via connexion WAN, via HTTPS ( ) |
|
| chiffrement des données à l'aide d'HTTPS, installation et initialisation via connexion WAN ( ) |
|
| chiffrement des données au cours d'une installation et initialisation via connexion WAN |
| | avec certificat numérique ( ) |
| | avec un certificat numérique ( ) |
| | avec une clé privée ( ) |
|
| chiffrement des données au cours de l'installation et initialisation via connexion WAN, avec certificat numérique ( ) |
|
| clé de chiffrement |
| | chiffrement des données au cours d'une installation et initialisation via connexion WAN ( ) |
| | création ( ) ( ) |
| | description ( ) |
| | installation |
| | | avec le programme wanboot ( ) |
| | | exemple ( ) ( ) ( ) |
| | | avec la commande ickey ( ) |
| | | méthodes d'installation ( ) |
| | | dans l'OBP client ( ) |
| | | sur un client en cours d'exécution ( ) |
| | | avec la commande set-security-key ( ) |
| | spécification dans le fichier wanboot.conf ( ) |
| | utilisation avec des installations et initialisations via connexion WAN ( ) |
|
| clé de chiffrement 3DES |
| | création avec wanbootutil ( ) |
| | chiffrement des données pour une installation et initialisation via connexion WAN ( ) |
| | installation |
| | | avec le programme wanboot ( ) |
| | chiffrement de données pour une installation et initialisation via connexion WAN ( ) |
| | installation |
| | | avec la commande ickey ( ) |
| | | dans l'OBP client ( ) |
| | | sur un client en cours d'exécution ( ) |
|
| clé de chiffrement AES |
| | création avec wanbootutil ( ) |
| | chiffrement des données pour une installation et initialisaiton via connexion WAN ( ) |
| | installation |
| | | avec le programme wanboot ( ) |
| | chiffrement des données pour une installation et initialisation via connexion WAN ( ) |
| | installation |
| | | avec la commande ickey ( ) |
| | | dans l'OBP client ( ) |
| | | sur un client en cours d'exécution ( ) |
|
| clé de chiffrement Triple DES |
| | Voir clé de chiffrement 3DES | |
|
| clé de hachage |
| | création ( ) ( ) |
| | description ( ) |
| | installation |
| | | avec le programme wanboot ( ) |
| | | exemple ( ) |
| | | avec la commande ickey ( ) |
| | | méthodes d'installation ( ) |
| | | dans l'OBP client ( ) |
| | | sur un client en cours d'exécution ( ) |
| | | avec la commande set-security-key ( ) |
| | protection des données avec des installations et initialisations via connexion WAN ( ) |
| | protection des données lors de l'installation et initialisation via connexion WAN ( ) |
| | spécification dans le fichier wanboot.conf ( ) |
|
| clé de hachage HMAC SHA1 |
| | Voir clé de hachage | |
|
| clé de règle network, description et valeurs ( ) |
|
| clé privée |
| | création avec la commande wanbootutil ( ) |
| | insertion dans le fichier keystore ( ) |
| | préparation à des installations et initialisations via connexion WAN ( ) |
| | utilisation pour l'authentification client ( ) |
|
| clé privée SSL |
| | Voir clé privée | |
|
| clés |
| | Voir clé de chiffrement, clé de hachage | |
|
| client, configuration minimale requise pour l'installation et initialisation via connexion WAN ( ) |
|
| clients sans disque |
| | espace swap ( ) |
| | plates-formes ( ) |
|
| commande add_install_client |
| | accès au répertoire JumpStart ( ) |
| | configuration du serveur d'installation |
| | | à l'aide du DVD ( ) |
| | d'une configuration du serveur d'installation |
| | | à l'aide du CD ( ) |
| | exemple |
| | | avec DHCP pour média CD ( ) |
| | | avec le protocole DHCP pour CD ( ) |
| | | avec le protocole DHCP pour DVD ( ) ( ) |
| | | de serveur d'initialisation à l'aide du CD ( ) |
| | | définition d'un périphérique d'initialisation ( ) |
| | | définition d'une console série ( ) |
| | | définition de la console série ( ) ( ) |
| | | définition du périphérique d'initialisation ( ) ( ) |
| | | en cas d'utilisation du protocole DHCP pour CD ( ) |
| | | même sous-réseau pour CD ( ) |
| | | serveur d'initialisation pour DVD ( ) |
| | exemple de définition d'un périphérique d'initialisation ( ) ( ) ( ) |
| | exemple de définition d'une console série ( ) ( ) ( ) |
| | exemple pour CD multiplates-formes ( ) |
|
| commande banner ( ) |
|
| commande de partage |
| | partage d'un répertoire JumpStart ( ) |
| | partage du répertoire JumpStart ( ) |
|
| commande devalias |
| | définition des alias de périphérique pour l'initialisation via connexion WAN ( ) |
| | syntaxe ( ) ( ) |
| | vérification des alias de périphérique pour l'initialisation via connexion WAN ( ) |
|
| commande eeprom, vérification de la prise en charge des installations et initialisations via connexion WAN par l'OBP ( ) |
|
| commande fdisk ( ) |
|
| commande flar create ( ) |
|
| commande ickey |
| | installation des clés sur le client d'initialisation WAN ( ) |
| | syntaxe ( ) |
|
| commande install_config ( ) ( ) |
|
| commande list-security-keys |
| | liste des clés intallées sur un client ( ) |
| | syntaxe ( ) |
|
| commande mount ( ) |
|
| commande nistbladm ( ) ( ) |
|
| commande nvalias |
| | définition des alias de périphérique pour l'initialisation via connexion WAN ( ) |
| | syntaxe ( ) |
|
| commande pfinstall ( ) ( ) |
|
| commande printenv, vérification de la prise en charge de l'initialisation via connexion WAN ( ) |
|
| commande printenv, vérification de la prise en charge de l'initialisation via connexion WAN ( ) |
|
| commande prtvtoc |
| | SPARC : création d'un fichier de configuration de disque ( ) |
| | x86 : création de fichiers de configuration de disque ( ) |
|
| commande reset ( ) |
|
| commande set-security-key |
| | installation de clé sur le client d'initialisation via connexion WAN ( ) |
| | installation de clés sur le client d'initialisation via connexion WAN ( ) |
| | syntaxe ( ) ( ) |
|
| commande setenv |
| | définition des informations d'initialisation du réseau ( ) |
| | définition des informations de configuration du réseau ( ) |
| | syntaxe ( ) |
|
| commande shareall ( ) ( ) |
|
| commande showmount ( ) |
|
| commande stty ( ) ( ) ( ) ( ) |
|
| commande uname ( ) |
|
| commande wanbootutil |
| | affichage de la valeur d'une clé de chiffrement ( ) |
|
| commande wanbootutil |
| | affichage de la valeur d'une clé de chiffrement ( ) |
|
| commande wanbootutil |
| | affichage de la valeur d'une clé de hachage ( ) |
|
| commande wanbootutil |
| | affichage de la valeur d'une clé de hachage ( ) |
| | affichage de la valeur de la clé de chiffrement ( ) |
| | affichage de la valeur de la clé de hachage ( ) |
| | configuration de l'authentification client et serveur ( ) ( ) ( ) ( ) |
| | création d'une clé de chiffrement ( ) ( ) |
| | création d'une clé de hachage ( ) ( ) |
| | division d'un fichier PKCS#12 ( ) ( ) ( ) |
| | insertion d'un certificat de confiance ( ) |
| | insertion d'une clé privée client ( ) |
| | insertion de certificat de confiance ( ) |
| | insertion de clés privées client ( ) |
| | insertion du certificat numérique client ( ) ( ) |
| | syntaxe ( ) |
|
| commandes pour Live Upgrade ( ) |
|
| commentaires |
| | dans des profils ( ) |
| | dans le fichier wanboot.conf ( ) |
| | dans les fichiers rules ( ) |
|
| comparer des environnements d'initialisation Live Upgrade ( ) |
|
| concaténation |
| | définition ( ) |
| | présentation conceptuelle ( ) |
|
| concaténation, description ( ) |
|
| concaténations, informations pour la création ( ) |
|
| conditions |
| | installation réseau |
| | | serveurs ( ) |
|
| configuration |
| | création de fichiers de configuration de disque ( ) |
| | des systèmes de fichiers Solaris Live Upgrade ( ) |
| | serveur d'initialisation via connexion WAN ( ) |
| | serveur de journalisation pour une installation et initialisation via connexion WAN ( ) |
| | service DHCP pour une installation et initialisation via connexion WAN ( ) |
|
| configuration minimale |
| | d'utilisation de Solaris Web Start ( ) |
| | espace swap ( ) |
| | mémoire ( ) |
| | pour utiliser Live Upgrade ( ) |
| | profils ( ) ( ) |
|
| configuration minimale requise, installation et initialisation via connexion WAN ( ) |
|
| configuration requise, pour l'utilisation de Solaris Web Start ( ) |
|
| console série |
| | définition à l'aide de la commande add_install_client ( ) ( ) ( ) |
|
| contraintes |
| | espace disque ( ) |
| | partition fdisk ( ) |
|
| copie |
| | disquette de l'assistant de configuration des périphériques de Solaris x86 Platform Edition ( ) |
| | fichiers d'installation JumpStart ( ) ( ) ( ) ( ) |
| | fichiers du répertoire JumpStart ( ) |
| | systèmes de fichiers Solaris Live Upgrade ( ) |
|
| Core Solaris Software Group ( ) |
|
| Core System Support |
| | description ( ) |
| | taille ( ) |
|
| correspondance |
| | ordre de lecture des règles ( ) ( ) |
| | valeurs de rootdisk ( ) ( ) |
|
| CPU (processeurs) |
| | mot-clé de règle ( ) |
| | mot-clé de sonde ( ) |
| | mots-clés de règles ( ) |
|
| création |
| | archives Solaris Flash |
| | | liste des tâches ( ) |
| | fichier /etc/locale ( ) |
| | d'un serveur d'initialisation su un sous-réseau |
| | | à l'aide du ( ) |
| | d'un serveur d'initialisation sur le sous-réseau à l'aide du DVD ( ) |
| | d'un serveur d'initialisation sur un sous-réseau |
| | | tâches, CD ( ) |
| | | tâches, DVD ( ) |
| | d'un serveur d'installation à l'aide d'un CD multiplates-formes ( ) |
| | d'un serveur d'installation à l'aide d'un CD mutliplates-formes ( ) |
| | d'un serveur d'installation à l'aide du CD ( ) ( ) ( ) |
| | du fichier custom_probes.ok ( ) |
| | du fichier rules.ok ( ) |
| | fichier custom_probes.ok ( ) |
| | fichier rules.ok ( ) |
| | fichier sysidcfg ( ) |
| | fichiers de configuration de disque ( ) |
| | fichiers de règles ( ) |
| | fichiersysidcfg ( ) |
| | initialisation via connexion WAN |
| | | archive Solaris Flash ( ) |
| | | certificat de confiance ( ) |
| | | certificats numériques ( ) |
| | | clé de chiffrement ( ) |
| | | clé de hachage ( ) |
| | | clé privée client ( ) |
| | | fichier de configuration système ( ) |
| | | fichier de règles ( ) |
| | | fichier wanboot.conf ( ) |
| | | fichiers d'installation ( ) |
| | | fichiers JumpStart personnalisés ( ) |
| | | miniracine de l'initialisation via connexion WAN ( ) |
| | | répertoire /etc/netboot ( ) |
| | | répertoire document racine ( ) |
| | profils |
| | | dérivés ( ) |
| | | description ( ) |
| | répertoire JumpStart |
| | | serveur ( ) |
| | serveur d'installation ( ) |
| | serveur d'installation pour une installation PXE ( ) |
| | Solaris Flash archives |
| | | conditions requises pour les plates-formes ( ) |
| | | personnalisation ( ) |
| | | planification ( ) |
| | | tâches ( ) |
| | Solaris Live Upgrade |
| | | d'un environnement d'initialisation, tâches ( ) |
| | | un environnement d'initialisation, tâches ( ) |
| | systèmes de fichiers locaux ( ) |
| | systèmes de fichiers miroirs ( ) |
| | UFS ( ) |
|
| création d'un |
| | serveur d'installation à l'aide du DVD ( ) ( ) |
|
| créer |
| | fichier rules.ok ( ) |
| | Solaris Live Upgrade |
| | | personnalisation du contenu d'un environnement d'initialisation, tâches ( ) |
| | | un environnement d'initialisation, description ( ) |
| | | un environnement d'initialisation, tâches ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) |
|
| fichier .cshrc ( ) |
| | | |
F |
|
| commande fdformat ( ) ( ) |
|
| commandefdformat ( ) |
|
| fdisk mot-clé de profil, exemple ( ) |
|
| fichier /etc/mnttab ( ) |
|
| fichier bootlog, dirigé vers le serveur de journalisation ( ) |
|
| fichier bootparams |
| | activation de l'accès au répertoire JumpStart ( ) |
| | mise à jour ( ) |
|
| fichier certstore |
| | description ( ) |
| | insertion du certificat client ( ) ( ) |
|
| fichier custom_probes |
| | attribution de nom ( ) |
| | exigences ( ) |
| | tester custom_probes ( ) |
| | validation à l'aide du script check ( ) |
| | valider à l'aide de check ( ) |
|
| fichier custom_probes.ok |
| | création ( ) ( ) ( ) |
| | description ( ) |
|
| fichier d'environnement linguistique ( ) |
|
| fichier de configuration système |
| | création pour l'installation et initialisation via connexion WAN ( ) |
| | création pour une installation et initialisation via connexion WAN ( ) |
| | description ( ) |
| | exemples |
| | | installation et initialisation via connexion WAN non sécurisée ( ) |
| | | installation et initialisation via connexion WAN sécurisée ( ) ( ) |
| | SjumpsCF paramétrage ( ) |
| | spécification dans le fichier wanboot.conf ( ) |
| | SsysidCF paramétrage ( ) |
| | syntaxe ( ) |
|
| fichier de règles |
| | ajout de règles ( ) |
| | attribution de nom ( ) ( ) |
| | création ( ) |
| | description ( ) |
| | exemple ( ) |
| | syntaxe ( ) |
| | tester des règles ( ) |
| | validation à l'aide de check |
| | | exemple JumpStart personnalisé ( ) |
| | | profils dérivés et ( ) |
| | validation pour une installation et initialisation via connexion WAN ( ) |
| | valider en utilisant check ( ) |
|
| fichier des règles |
| | exemple JumpStart personnalisé ( ) ( ) |
|
| fichier dfstab ( ) ( ) |
|
| fichier keystore |
| | description ( ) |
| | insertion |
| | | clé privée client ( ) |
| | insertion de la clé privée client ( ) |
|
| Fichier Makefile ( ) |
|
| fichier mnttab ( ) |
|
| fichier PKCS#12 |
| | exigences pour une installation et initialisation via connexion WAN ( ) |
| | préparation à une installation et initialisation via connexion WAN ( ) |
| | préparation en vue d'une installation et initialisation via connexion WAN ( ) |
|
| fichier règles |
| | commentaires dans ( ) |
| | règles sur plusieurs lignes ( ) |
|
| fichier règles.ok |
| | ordre de correspondance au sein des règles ( ) |
| | ordre de correspondance avec les règles ( ) ( ) |
|
| fichier rules.ok |
| | création ( ) |
| | description ( ) |
|
| fichier rules.ok.ok, création ( ) |
|
| fichier sysidcfg |
| | directives et configuration minimale ( ) |
| | initialisation via connexion WAN |
| | | création ( ) |
| | | exemple ( ) |
| | mot-clé display pour systèmes x86, description ( ) |
| | mot-clé keyboard pour systèmes x86, description ( ) |
| | mot-clé monitor pour systèmes x86, description ( ) |
| | mot-clé name_service, description ( ) |
| | mot-clé pointer pour systèmes x86, description ( ) |
| | mot-clé root_password, description ( ) |
| | mot-clé security_policy, description ( ) |
| | mot-clé system_locale, description ( ) |
| | mot-clé terminal, description ( ) |
| | mot-clé timeserver, description ( ) |
| | mot-clé timezone, description ( ) |
| | mots-clés ( ) |
| | procédure de création ( ) |
|
| fichier truststore |
| | description ( ) |
| | insertion d'un certificat de confiance ( ) |
| | insertion de certificats de confiance ( ) |
|
| fichier upgrade_log ( ) ( ) ( ) |
|
| fichier wanboot.conf |
| | création en vue d'une installation et initialisation via connexion WAN ( ) |
| | création pour une installation et initialisation via connexion WAN ( ) |
| | description ( ) |
| | exemples |
| | | initialisation via connexion WAN non sécurisée ( ) |
| | | installation et initialisation via connexion WAN sécurisée ( ) ( ) |
| | informations requises pour une initialisation via connexion WAN ( ) |
| | validation pour installation et initialisation via connexion WAN ( ) |
| | validation pour l'installation et initialisation via connexion WAN ( ) ( ) |
| | validation pour une installation et initialisation via connexion WAN ( ) |
|
| fichiers de configuration de disque |
| | création |
| | | systèmes x86 ( ) |
|
| fichiers de configuration de disques |
| | création |
| | | systèmes SPARC ( ) |
| | description ( ) ( ) |
|
| fichiers de règles, pour une initialisation via connexion WAN ( ) |
|
| fichiers de résultat |
| | fichierbootlog pour une installation et initialisation via connexion WAN ( ) |
| | journal de mise à niveau ( ) |
| | mettre à niveau le journal ( ) |
|
| fichiers de résultats |
| | journal de mise à niveau ( ) |
| | journal du script de début ( ) |
| | journal du script de fin ( ) |
|
| fichiers et système de fichiers |
| | création |
| | | systèmes de fichiers miroirs ( ) |
|
| fichiers et systèmes de fichiers |
| | affichage des systèmes de fichiers montés ( ) |
| | afficher les systèmes de fichiers partagés ( ) |
| | configuration système |
| | | créaton pour une initialisation via connexion WAN ( ) |
| | | description ( ) |
| | | syntaxe ( ) |
| | copie |
| | | des fichiers d'installation JumpStart ( ) |
| | | des fichiers du répertoire JumpStart à l'aide des scripts de fin ( ) |
| | | disquette de l'assistant de configuration des périphériques de Solaris x86 Platform Edition ( ) |
| | | fichiers d'installation de JumpStart ( ) |
| | | fichiers d'installation JumpStart ( ) ( ) |
| | création |
| | | systèmes de fichiers locaux ( ) |
| | création d'un système de fichiers UFS ( ) |
| | montage de systèmes de fichiers distants ( ) |
| | personnalisation de |
| | | Solaris Live Upgrade ( ) |
| | résultat du script de début ( ) |
| | résultat du script de fin ( ) |
| | Solaris Live Upgrade |
| | | copier un système de fichiers partageable, tâches ( ) |
| | | création de volume RAID-1 (miroirs), description ( ) |
| | | description ( ) |
| | | directives pour la création ( ) |
| | | directives pour la sélection d'une tranche ( ) |
| | | estimation de la taille ( ) |
| | | partage de systèmes de fichiers entre environnements d'initialisation ( ) |
| | système de fichiers d'initialisation via connexion WAN ( ) |
| | wanboot.conf |
| | | création ( ) |
| | | description ( ) ( ) |
| | | syntaxe ( ) |
|
| fichiers journaux |
| | mettre à niveau l'installation ( ) |
|
| Fichiers journaux, mettre à niveau une installation ( ) |
|
| fichiers journaux |
| | mettre à niveau une installation ( ) |
| | résultats du script de début ( ) |
| | résultats du script de fin ( ) |
| | pour une installation et initialisation via connexion WAN ( ) |
|
| fichiers Public-Key Crytpography Standards #12 |
| | Voir fichier PKCS#12 | |
|
| fichiersysidcfg, syntaxe ( ) |
|
| finish.log fichier ( ) |
|
| Flash |
| | Voir archive | |
|
| formater des disquettes ( ) |
|
| fuseau horaire, préconfiguration ( ) |
|
| fusion d'une archive Solaris Flash ( ) |
| | | |
I |
|
| identifiant réseau ( ) ( ) ( ) |
|
| informations système, afficher ( ) |
|
| initialisation du système, réinitialiser d'abord les terminaux et l'affichage ( ) |
|
| initialisation en mode monoutilisateur ( ) |
|
| initialisation via connexion WAN |
| | exemples |
| | | fichier wanboot.conf ( ) |
|
| installation |
| | comparaison de méthodes ( ) |
| | configuration système requise ( ) |
| | en comparaison avec une mise à niveau ( ) |
| | initialisation via connexion WAN, description ( ) |
| | présentation des tâches ( ) |
| | recommandations relatives à l'espace disque ( ) |
| | Solaris Flash archives, description ( ) |
|
| installation de systèmes clones |
| | installation initiale ( ) |
| | mise à jour ( ) |
|
| installation du réseau, avec le DVD ( ) |
|
| installation en réseau |
| | au moyen du CD ( ) ( ) ( ) |
|
| installation et initalisation via connexion WAN |
| | bootlog-cgi programme |
| | | spécification dans wanboot.conf fichier ( ) |
| | serveur d'enregistrement |
| | | spécification dans wanboot.conf fichier ( ) |
|
| installation et initialisation via connexion WAN |
| | alias de périphérique dans l'OBP ( ) |
| | attaques de déni de service ( ) |
| | authentification client |
| | | conditions requises ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | authentification du serveur |
| | | conditions requises ( ) |
| | authentification serveur |
| | | spécification dans le fichier wanboot.conf ( ) |
| | binaires altérés ( ) |
| | caractéristiques requises |
| | | serveur Web ( ) |
| | caractéristiques requises pour le serveur Web ( ) |
| | certificats numériques |
| | | division ( ) |
| | | exigences ( ) |
| | | formatage ( ) |
| | | insertion ( ) |
| | chiffrement de données |
| | | à l'aide d'HTTPS ( ) |
| | | avec une clé de chiffrement ( ) |
| | | via HTTPS ( ) |
| | clé de chiffrement |
| | | affichage de valeur ( ) |
| | | création ( ) |
| | | installation ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | clé de hachage |
| | | affichage de valeur ( ) |
| | | création ( ) |
| | | installation ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | clé privée |
| | | extraction du fichier PKCS#12 ( ) |
| | | insertion dans le fichier keystore ( ) |
| | | utilisation pour l'authentification client ( ) |
| | configuration minimale requise pour le client ( ) |
| | authentification client |
| | | configuration ( ) |
| | commande ickey ( ) |
| | commande wanbootutil |
| | | affichage de la valeur de la clé de chiffrement ( ) ( ) |
| | | affichage de la valeur de la clé de hachage ( ) ( ) |
| | | création d'un certificat de confiance ( ) |
|
| Installation et initialisation via connexion WAN |
| | commande wanbootutil |
| | | création d'une clé de chiffrement ( ) |
|
| installation et initialisation via connexion WAN |
| | commande wanbootutil |
| | | création d'une clé de chiffrement ( ) |
| | | création d'une clé de hachage ( ) |
| | | création d'une clé privée ( ) |
|
| Installation et initialisation via connexion WAN |
| | commande wanbootutil |
| | | création de la clé de hachage ( ) |
|
| installation et initialisation via connexion WAN |
| | commandes ( ) |
| | configuration |
| | | authentification client et serveur ( ) ( ) ( ) |
| | | prise en charge du service DHCP ( ) |
| | | serveur d'initialisation via connexion WAN ( ) |
| | | serveur de journalisation ( ) |
| | configuration et fichiers de sécurité, description ( ) |
| | configuration minimale requise |
| | | espace disque client ( ) |
| | | espace disque du serveur d'installation ( ) |
| | | mémoire client ( ) |
| | | OBP pour le client ( ) |
| | | prise en charge de la version SSL ( ) |
| | | proxy Web ( ) |
| | | serveur d'initialisation via connexion WAN ( ) |
| | | serveur de journalisation ( ) |
| | | service DHCP ( ) |
| | | système d'exploitation pour le serveur Web ( ) |
| | | unité centrale client CPU ( ) |
| | configuration non sécurisée |
| | | conditions requises ( ) |
| | | description ( ) |
| | | tâches relatives à l'installation ( ) |
| | configuration sécurisée |
| | | conditions requises ( ) |
| | | description ( ) |
| | | tâches relatives à l'installation ( ) |
| | configurations de sécurité, description ( ) |
| | configurations des serveurs, description ( ) |
| | copie du programme wanboot-cgi ( ) |
| | création |
| | | archive Solaris Flash ( ) |
| | | clé de chiffrement ( ) |
| | | clé de hachage ( ) |
| | | fichier de configuration système ( ) |
| | | fichier de règles ( ) |
| | | fichiersysidcfg ( ) |
| | | profil ( ) |
| | | scripts de début ( ) |
| | | scripts de fin ( ) |
| | | wanboot.conf fichier ( ) |
| | déroulement des événements ( ) |
| | description ( ) |
| | avec prise en charge DHCP ( ) |
| | exemples |
| | | activation de l'authentification client ( ) |
| | | activation de l'authentification serveur ( ) ( ) |
| | | configuration d'un serveur de journalisation ( ) ( ) |
| | | configuration du réseau ( ) |
| | | copie du programme wanboot-cgi ( ) |
| | | création d'une archive Solaris Flash ( ) |
| | | création d'une clé de chiffrement ( ) |
|
| Installation et initialisation via connexion WAN |
| | exemples |
| | | création d'une clé de hachage ( ) |
|
| installation et initialisation via connexion WAN |
| | exemples |
| | | création d'une clé de hachage ( ) |
|
| Installation et initialisation via connexion WAN |
| | exemples |
| | | création de la clé de hachage ( ) |
|
| installation et initialisation via connexion WAN |
| | exemples |
| | | création de la miniracine de l'initialisation via connexion WAN ( ) |
| | | création du fichier de configuration système ( ) |
| | | création du profil JumpStart personnalisé ( ) |
| | | création du répertoire /etc/netboot ( ) |
| | | création du répertoire/etc/netboot ( ) |
| | | création fichier rules ( ) |
| | | création fichier sysidcfg ( ) |
|
| Installation et initialisation via connexion WAN |
| | exemples |
| | | en utilisant le chiffrement ( ) |
|
| installation et initialisation via connexion WAN |
| | exemples |
| | | fichier de configuration système ( ) ( ) |
| | | fichier sysidcfg ( ) |
| | | fichier wanboot.conf ( ) ( ) |
| | | insertion d'un certificat de confiance ( ) ( ) |
| | | insertion de la clé privée client ( ) ( ) |
| | | insertion du certificat client ( ) ( ) |
| | | installation à partir d'un CD local ( ) |
| | | installation avec service DHCP ( ) |
| | | installation d'une clé de chiffrement dans l'OBP ( ) |
| | | installation d'une clé de chiffrement sur un client en cours de fonctionnement ( ) |
| | | installation d'une clé de hachage dans l'OBP ( ) |
| | | installation d'une clé de hachage sur un client en cours de fonctionnement ( ) |
| | | installation de la clé de chiffrement dans l'OBP ( ) |
| | | installation de la clé de hachage dans l'OBP ( ) |
| | | installation du programme wanboot ( ) |
| | | installation interactive ( ) |
| | | installation non interactive ( ) ( ) |
| | | installation sans surveillance ( ) ( ) |
| | | profil JumpStart personnalisé ( ) |
| | | répertoire /etc/netboot ( ) |
| | | répertoire document racine ( ) |
| | | vérification de l'alias de périphérique net ( ) ( ) ( ) |
| | | vérification de la prise en charge par l'OBP client ( ) ( ) |
| | exigences |
| | | certificats numériques ( ) |
| | fichier de configuration système |
| | | création ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | | syntaxe ( ) |
| | fichier wanboot.conf |
| | | création ( ) |
| | | validation ( ) |
| | informations requises pour l'installation ( ) |
| | installation d'un client |
| | | méthodes d'installation ( ) |
| | | tâches requises ( ) |
| | installation d'une clé de chiffrement |
| | | dans l'OBP client ( ) |
| | installation d'une clé de hachage |
| | | dans l'OBP client ( ) |
| | installation de la clé de chiffrement ( ) |
| | | sur un client en cours d'exécution ( ) |
| | installation de la clé de hachage ( ) |
| | | avec la commande ickey ( ) |
| | | sur un client en cours d'exécution ( ) |
| | installation du programme wanboot ( ) |
| | installation interactive ( ) |
| | installation non interactive ( ) ( ) |
| | installation sans surveillance ( ) ( ) |
| | à partir d'un CD local ( ) |
| | miniracine de l'initialisation via connexion WAN |
| | | création ( ) |
| | | description ( ) |
| | | stockage dans le répertoire document racine ( ) |
| | miniracine de l'installation et initialisation via connexion WAN |
| | | spécification dans le fichier wanboot.conf ( ) |
| | partage des fichiers de configuration et de sécurité |
| | | réseau complet ( ) ( ) |
| | | sous-réseau complet ( ) ( ) |
| | | spécifique à un client ( ) ( ) |
| | planification |
| | | agencement des serveurs ( ) |
| | | partage des fichiers de configuration et de sécurité ( ) |
| | | répertoire /etc/netboot ( ) |
| | | répertoire document racine ( ) |
| | | stockage de la configuration et des fichiers de sécurité ( ) |
| | | stockage des fichiers d'installation ( ) |
| | préparation de certificats numériques ( ) |
| | prise en charge OBP ( ) |
| | programme bootlog-cgi ( ) |
| | programme wanboot |
| | | installation ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | | stockage dans le répertoire document racine ( ) |
| | programme wanboot-cgi ( ) |
| | | copie vers le serveur d'initialisation via connexion WAN ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | programmewanboot |
| | | description ( ) |
| | protection de données |
| | | à l'aide de certificats numériques ( ) |
| | protection des données |
| | | à l'aide d'une clé de hachage ( ) |
| | | avec une clé de chiffrement ( ) |
| | questions de sécurité ( ) |
| | questions relatives à la confidentialité des clés de chiffrement ( ) |
| | questions relatives à la confidentialité des clés de hachage ( ) |
| | répertoire /etc/netboot |
| | | création ( ) |
| | | définition des autorisations ( ) |
| | | exemple ( ) |
| | répertoire /etc/netboot e |
| | | description ( ) |
| | répertoire document racine |
| | | description ( ) |
| | | exemple ( ) |
| | | fichiers ( ) |
| | authentification serveur |
| | | configuration ( ) |
| | set-security-key commande ( ) |
| | stockage du programme wanboot-cgi ( ) |
| | configuration minimale requise ( ) |
| | planification |
| | | configuration minimale requise ( ) |
| | vérification de la prise en charge par l'OBP client ( ) |
| | vérification des alias de périphérique dans l'OBP ( ) |
| | vérification du fichier de règles ( ) |
|
| Installation et initialisation via connexion WAN |
| | wanboot.conf fichier |
| | | paramètres ( ) |
| | | syntaxe ( ) |
|
| installation JumpStart personnalisée ( ) |
| | avec installation et initialisation via connexion WAN ( ) |
| | en comparaison avec d'autres méthodes d'installation ( ) |
| | exemples ( ) ( ) |
| | | configuration de systèmes de marketing ( ) |
| | | configuration des systèmes du groupe technique ( ) |
| | | configuration du site ( ) ( ) |
| | | création de profil marketing ( ) |
| | | création du profil technique ( ) |
| | | édition du fichier des règles ( ) ( ) |
| | | en réseau ( ) |
| | | hors réseau ( ) |
| | | initialiser et installer ( ) |
| | | installation des systèmes du groupe Marketing ( ) |
| | | profil d'installation et initialisation via connexion WAN ( ) |
| | | profil de l'installation et initialisation via connexion WAN ( ) |
| | | profil Solaris Flash ( ) |
| | | profils de systèmes de fichiers miroirs ( ) ( ) |
| | | répertoire JumpStart ( ) |
|
| installation Jumpstart personnalisée |
| | exemples |
| | | répertoire JumpStart ( ) |
|
| installation JumpStart personnalisée |
| | exemples |
| | | script check ( ) |
| | | Solaris Flash profil ( ) ( ) |
| | | système autonome ( ) |
| | fonctions facultatives ( ) |
| | | présentation ( ) |
| | | programme d'installation spécifiques à l'organisation ( ) |
| | | scripts de début ( ) ( ) |
| | | scripts de fin ( ) ( ) |
| | initialisation et installation ( ) |
| | ligne tip et ( ) ( ) |
| | mise à niveau ( ) |
| | mots-clés de profil ( ) |
| | préparatifs ( ) ( ) |
| | présentation ( ) |
|
| installation par initialisation via connexion WAN, quand utiliser ( ) |
|
| installation réseau |
| | Voir aussi installation et initialisation via connexion WAN | |
| | à l'aide de PXE ( ) |
| | à l'aide du DVD ( ) |
| | avec le DHCP ( ) |
| | conditions ( ) |
| | description ( ) |
| | exemple d'installation et initialisation via connexion WAN ( ) |
| | installation JumpStart personnalisée |
| | | exemple ( ) |
| | préparation ( ) |
| | utilisation d'un média multiplates-formes ( ) |
| | utilisation de PXE ( ) |
|
| installation via connexion WAN |
| | exemples |
| | | préparation de certificats numériques ( ) |
|
| interface IDE |
| | analyse de la surface ( ) |
| | traçage des blocs erronés ( ) |
|
| interface réseau, préconfiguration ( ) |
|
| IPv6, préconfiguration ( ) |
|
| IRQ, préconfiguration ( ) |
| | | |
M |
|
| masque de réseau, préconfiguration ( ) |
|
| mémoire |
| | configuration minimale requise pour une installation et initialisation via connexion WAN ( ) |
| | espace swap et ( ) |
| | mot-clé de règle ( ) ( ) |
| | mot-clé de sonde ( ) |
|
| message boot: cannot open /kernel/unix ( ) |
|
| message Can't boot from file/device ( ) |
|
| message cannot open /kernel/unix ( ) |
|
| message CHANGE DEFAULT BOOT DEVICE ( ) |
|
| message clock gained xxx days ( ) |
|
| message d'erreur Client inconnu ( ) |
|
| message d'erreur CLIENT MAC ADDR ( ) |
|
| message getfile: RPC failed: error 5: RPC Timed out ( ) |
|
| message le0: No carrier - transceiver cable problem ( ) |
|
| message No carrier - transceiver cable problem ( ) |
|
| message Not a UFS filesystem ( ) |
|
| message RPC failed: error 5: RPC Timed out ( ) |
|
| message RPC Timed out ( ) ( ) |
|
| message transceiver cable problem ( ) |
|
| message WARNING: clock gained xxx days ( ) |
|
| metadb mot-clé de profil ( ) |
|
| métapériphérique |
| | Voir volume | |
|
| mettre à niveau |
| | avec réaffectation d'espace disque ( ) |
| | fichier journal ( ) ( ) ( ) |
| | méthodes ( ) |
| | mots-clés de profil ( ) ( ) ( ) |
| | nettoyage ( ) |
| | par rapport à l'installation initiale ( ) |
| | Solaris Live Upgrade |
| | | directives pour ( ) |
| | | récupération d'un échec de mise à niveau pour ( ) |
| | | tâches ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) |
| | vers une version de mise à jour de Solaris ( ) |
|
| microprocesseurs |
| | mot-clé de règle ( ) |
| | mot-clé de sonde ( ) |
| | mots-clés de règles ( ) |
|
| miniracine de l'initialisation via connexion WAN |
| | création ( ) ( ) |
| | description ( ) |
| | spécification dans le fichier wanboot.conf ( ) |
| | stockage dans le répertoire document racine ( ) |
|
| miroir |
| | Voir volume RAID-1 | |
| | définition ( ) |
| | directives ( ) |
| | et géométries de disque ( ) |
| | informations pour la création ( ) |
| | présentation conceptuelle ( ) |
|
| mise à jour, installation JumpStart personnalisée ( ) |
|
| mise à jour d'un système clone, description ( ) |
|
| mise à niveau |
| | à l'aide de la méthode d'installation JumpStart personnalisée ( ) |
| | comparaison de méthodes ( ) |
| | configuration système requise ( ) |
| | échec de la mise à niveau ( ) |
| | en comparaison avec une installation ( ) |
| | méthodes ( ) |
| | nettoyage ( ) |
| | présentation des tâches ( ) |
| | recommandations relatives à l'espace disque ( ) |
| | Solaris Live Upgrade |
| | | description ( ) |
| | | exemples ( ) ( ) ( ) ( ) |
| | | tâches ( ) |
|
| modification des répertoires |
| | vers l'image du logiciel Solaris 9 Édition pour plate-forme x86 sur le disque local ( ) |
| | vers l'image du logiciel Solaris 9 sur le disque local ( ) ( ) |
|
| modification des répertoires>, image du logiciel Solaris 9 Édition pour plate-forme SPARC sur le disque local ( ) |
|
| modify_install_server, description ( ) |
|
| montage |
| | affichage de systèmes de fichiers montés ( ) |
| | par Solaris 9 installation ( ) |
| | précaution à prendre pour le script de début ( ) |
| | systèmes de fichiers distants ( ) |
|
| mot -clé de profil fdisk, description et valeurs ( ) |
|
| mot-clé archive_location ( ) |
|
| mot-clé backup_media ( ) ( ) |
|
| mot-clé boot_device ( ) |
|
| mot-clé bootenv createbe ( ) |
|
| mot-clé client_arch ( ) |
|
| mot-clé de profil ( ) |
| | boot_device ( ) |
| | client_arch ( ) |
| | client_root ( ) |
| | client_swap ( ) |
| | cluster |
| | | description et valeurs ( ) |
| | dontuse |
| | | usedisk et ( ) |
| | geo |
| | | description et valeurs ( ) |
| | isa_bits |
| | | description et valeurs ( ) |
| | layout_constraint |
| | | description et valeurs ( ) |
| | locale |
| | | description et valeurs ( ) |
| | num_clients ( ) |
| | package |
| | | description et valeurs ( ) |
| | partitioning |
| | | choisir les disques ( ) |
| | | description et valeurs ( ) |
| | root_device ( ) |
| | system_type |
| | | description et valeurs ( ) |
| | usedisk |
| | | description et valeurs ( ) |
|
| mot-clé de profil client_root ( ) |
|
| mot-clé de profil cluster, description et valeurs ( ) |
|
| mot-clé de profil dontuse ( ) ( ) |
|
| mot-clé de profil du cluster |
| | description et valeurs ( ) |
| | exemples ( ) |
|
| mot-clé de profil filesys |
| | description et valeurs ( ) |
| | exemples ( ) ( ) |
|
| mot-clé de profil install_type |
| | configuration minimale ( ) |
| | contrainte ( ) |
| | exemples ( ) |
| | tester des profils ( ) ( ) |
|
| mot-clé de profil num_clients ( ) |
|
| mot-clé de profil package, description et valeurs ( ) |
|
| mot-clé de profil system_type |
| | description et valeurs ( ) |
| | exemples ( ) |
|
| mot-clé de profil usedisk, description et valeurs ( ) |
|
| mot-clé de règle |
| | any |
| | | description et valeurs ( ) |
| | arch ( ) |
| | disksize |
| | | description et valeurs ( ) |
| | domainname ( ) ( ) |
| | hostaddress ( ) ( ) |
| | hostname ( ) ( ) |
| | installed |
| | | description et valeurs ( ) ( ) |
| | karch ( ) ( ) |
| | memsize ( ) ( ) |
| | model ( ) |
| | network ( ) ( ) |
| | osname ( ) ( ) |
| | probe ( ) |
| | totaldisk ( ) ( ) |
|
| mot-clé de règle arch ( ) ( ) |
|
| mot-clé de règle disksize |
| | description et valeurs ( ) ( ) |
|
| mot-clé de règle domainname ( ) ( ) |
|
| mot-clé de règle hostaddress ( ) ( ) |
|
| mot-clé de règle hostname |
| | description et valeurs ( ) |
| | exemple ( ) |
|
| mot-clé de règle hostname rule, description et valeurs ( ) |
|
| mot-clé de règle installed |
| | description et valeurs ( ) ( ) |
|
| mot-clé de règle karch ( ) ( ) |
|
| mot-clé de règle memsize |
| | description et valeurs ( ) ( ) |
|
| mot-clé de règle model |
| | description et valeurs ( ) ( ) |
|
| mot-clé de règle network, description et valeurs ( ) |
|
| mot-clé de règle osname ( ) ( ) |
|
| mot-clé de règle probe, description et valeurs ( ) |
|
| mot-clé de règle totaldisk ( ) ( ) |
|
| mot-clé de règles ( ) |
|
| mot-clé de sonde |
| | arch ( ) |
| | disks ( ) |
| | domainname ( ) |
| | hostaddress ( ) |
| | hostname ( ) |
| | installed ( ) |
| | karch ( ) |
| | memsize ( ) |
| | model ( ) |
| | network ( ) |
| | osname ( ) |
|
| mot-clé de sonde arch ( ) |
|
| mot-clé de sonde disks, description et valeurs ( ) |
|
| mot-clé de sonde domainname ( ) |
|
| mot-clé de sonde hostaddress ( ) |
|
| mot-clé de sonde hostname, description et valeurs ( ) |
|
| mot-clé de sonde installed, description et valeurs ( ) |
|
| mot-clé de sonde karch ( ) |
|
| mot-clé de sonde memsize, description et valeurs ( ) |
|
| mot-clé de sonde model, description et valeurs ( ) |
|
| mot-clé de sonde network, description et valeurs ( ) |
|
| mot-clé de sonde osname ( ) |
|
| mot-clé de sonde totaldisk ( ) |
|
| mot-clé du profil |
| | cluster |
| | | description et valeurs ( ) |
|
| mot-clé du profil cluster, description et valeurs ( ) |
|
| mot-clé filesys ( ) ( ) |
|
| mot-clé geo ( ) |
|
| mot-clé install_type ( ) |
|
| mot-clé isa_bits ( ) |
|
| mot-clé layout_constraint ( ) ( ) |
|
| mot-clé locale ( ) |
|
| mot-clé partitioning ( ) |
|
| mot-clé root_device ( ) |
|
| mot de passe, superutilisateur ( ) ( ) |
|
| mot de passe no_master_check ( ) |
|
| mot de passe superutilisateur, préconfiguration ( ) |
|
| mot de passe superutilisateur, définition à l'aide d'un script de fin ( ) |
|
| mots-clés |
| | archives Solaris Flash, JumpStart personnalisé ( ) |
| | fichier sysidcfg ( ) |
| | probe ( ) |
| | Solaris Flash archives ( ) |
| | Solaris Live Upgrade |
| | | profil ( ) ( ) |
| | | volumes ( ) |
|
| mots-clés de profil ( ) |
| | archive_location ( ) |
| | backup_media ( ) |
| | bootenv createbe ( ) |
| | cluster |
| | | description et valeurs ( ) |
| | création de répliques de bases de données d'état (metdbs) ( ) |
| | dontuse |
| | | description et valeurs ( ) |
| | fdisk |
| | | description et valeurs ( ) |
| | filesys |
| | | description et valeurs ( ) |
| | | systèmes de fichiers distants ( ) |
| | | systèmes de fichiers locaux ( ) |
| | | systèmes de fichiers miroirs ( ) |
| | forced_deployment |
| | | description et valeurs ( ) |
| | install_type |
| | | configuration minimale ( ) |
| | | description et valeurs ( ) |
| | local_customization |
| | | description et valeurs ( ) ( ) ( ) |
| | metadb |
| | | description et valeurs ( ) |
| | partitionnement |
| | | en excluant des disques ( ) |
| | sensibilité à la casse ( ) |
|
| mots-clés de profils |
| | cluster |
| | | exemples ( ) |
| | fdisk |
| | | exemple ( ) |
| | filesys |
| | | exemples ( ) ( ) |
| | forced_deployment |
| | | description et valeurs ( ) |
| | install_type |
| | | contraintes ( ) |
| | | exemples ( ) |
| | metadb |
| | | exemples ( ) |
| | partition |
| | | exemples ( ) ( ) |
| | system_type |
| | | exemples ( ) |
|
| mots-clés de règles |
| | any |
| | | description et valeurs ( ) |
| | arch ( ) |
| | disksize |
| | | description et valeurs ( ) |
| | hostname ( ) |
| | model ( ) |
|
| mots-clés de sonde, totaldisk ( ) |
|
| mots-clés de sondes, rootdisk ( ) |
|
| mots de passe de profil |
| | no_master_check |
| | | description et valeurs ( ) |
| | | |
P |
|
| option -p du script check ( ) ( ) |
|
| option -p du script ( ) |
|
| packages |
| | ajout |
| | | à l'aide d'un script de fin ( ) |
| | | à l'aide de chroot ( ) |
| | contraintes inhérentes à la configuration de JumpStart personnalisée ( ) |
| | fichier d'administration ( ) |
| | Solaris Live Upgrade |
| | | ajout ( ) |
| | | contraintes ( ) ( ) ( ) |
|
| par défaut |
| | nom de profil dérivé ( ) |
| | partitionnement ( ) |
| | | en excluant des disques ( ) |
| | partitionner |
| | | choisir les disques ( ) |
| | SI_CONFIG_DIR variable ( ) |
|
| paramètre boot_file ( ) |
|
| paramètre client_authentication ( ) |
|
| paramètre encryption_type ( ) |
|
| paramètre root_file ( ) |
|
| paramètre root_server ( ) |
|
| paramètre server_authentication ( ) |
|
| paramètre signature_type ( ) |
|
| paramètre system_conf ( ) |
|
| partage, informations de configuration d'initialisation via connexion WAN ( ) |
|
| partage du répertoire JumpStart ( ) |
|
| partager d'un répertoire JumpStart ( ) |
|
| partition |
| | emplacement de la tranche racine ( ) |
| | exemples ( ) |
| | fdisk partitions ( ) |
| | partitions fdisk ( ) |
|
| partition de service, maintien lors de l'installation (systèmes x86) ( ) |
|
| partition fdisk, contraintes ( ) |
|
| partitioning |
| | mot-clé de profil ( ) ( ) |
|
| partitionnement, en excluant des disques ( ) |
|
| patchs ( ) |
| | ajout |
| | | à l'aide d'un script de fin ( ) |
| | | à l'aide de chroot ( ) |
| | | à l'aide de Solaris Live Upgrade ( ) |
| | vérification des niveaux de patchs ( ) |
|
| périphérique d'initialisation |
| | définition à l'aide de la commande add_install_client ( ) ( ) ( ) |
|
| permission, répertoire JumpStart ( ) |
|
| personnalisation Solaris Flash archives |
| | contenant des scripts ( ) |
| | système maître ( ) |
|
| planification |
| | comparaison de méthodes d'installation ( ) |
| | comparaison entre installation initiale et mise à niveau ( ) |
| | configuration système requise ( ) |
| | de l'installation d'une archive Solaris Flash ( ) |
| | espace disque ( ) |
| | installation et initialisation via connexion WAN |
| | | agencement des serveurs ( ) |
| | | caractéristiques requises pour le serveur Web ( ) |
| | | configuration minimale requise ( ) |
| | | informations requises pour l'installation ( ) |
| | | partage des fichiers de configuration et de sécurité ( ) |
| | | stockage de la configuration et des fichiers de sécurité ( ) |
| | | stockage des fichiers d'installation ( ) |
| | | stockage du programme wanboot-cgi ( ) |
| | installation sur le réseau ( ) |
| | pour Solaris Live Upgrade ( ) |
| | présentation des tâches ( ) |
|
| plates-formes |
| | client sans disque ( ) |
| | configuration du serveur d'installation ( ) |
| | configuration serveur d'installation ( ) |
| | correspondances entre attributs système et profils ( ) |
| | détermination du nom ( ) |
| | établir une correspondance entre les attributs d'un système et des profils ( ) ( ) |
| | mot-clé de règle ( ) ( ) |
| | mot-clé de sonde ( ) |
| | noms de modèles de systèmes ( ) ( ) |
| | noms des modèles d'un système ( ) |
|
| plusieurs lignes dans les fichiers rules ( ) |
|
| pointeur, préconfiguration ( ) |
|
| politique de sécurité, préconfiguration ( ) |
|
| Power Management ( ) |
|
| Preboot Execution Environment (PXE) |
| | décrit ( ) |
| | directives ( ) |
| | exemples |
| | | ajout d'un client d'installation ( ) ( ) ( ) |
| | | création d'un serveur d'installation ( ) |
| | exigences de configuration du BIOS ( ) |
| | tâches ( ) |
|
| préconfiguration des informations de configuration du système |
| | avantages ( ) |
| | choix d'une méthode ( ) |
| | utilisation d'un fichier sysidcfg ( ) |
| | utilisation d'un service de noms ( ) ( ) |
|
| préconfiguration des informations de configuration système |
| | à l'aide du DHCP ( ) |
| | environnement linguistique à l'aide de NIS ( ) |
| | environnement linguistique à l'aide de NIS+ ( ) |
| | Gestion d'énergie ( ) |
|
| préparatifs avant installation |
| | informations dont vous avez besoin pour effectuer une installation ( ) |
| | installation JumpStart personnalisée ( ) ( ) |
| | préconfiguration des informations système |
| | | avantages ( ) |
| | | méthodes ( ) |
|
| préparatifs nécessaires à l'installation |
| | informations dont vous avez besoin pour effectuer une mise à niveau ( ) |
| | préparer un système avant d'y effectuer une installation ( ) |
|
| préparatifs nécessaires à la mise à niveau, préparer un système avant d'y effectuer une mise à niveau ( ) |
|
| préparation à l'installation |
| | client pour une installation et initialisation via connexion WAN ( ) |
| | installation et initialisation via connexion WAN ( ) |
|
| processeurs |
| | configuration minimale requise pour l'installation et initialisation via connexion WAN ( ) |
| | mot-clé de règle ( ) |
| | mot-clé de sonde ( ) |
| | mots-clés de règles ( ) |
|
| profils |
| | attribution de noms ( ) |
| | champ de règle ( ) |
| | commentaires dans ( ) |
| | configuration minimale ( ) ( ) |
| | création ( ) |
| | description ( ) ( ) |
| | établir des correspondances entre des systèmes et des ( ) |
| | établir une correspondance avec des systèmes ( ) ( ) |
| | exemples ( ) |
| | | installation et initialisation via connexion WAN ( ) ( ) |
| | | profil_marketing ( ) |
| | | profil technique ( ) |
| | | Solaris Flash ( ) ( ) ( ) |
| | nommer ( ) |
| | pour installation et initialisation via connexion WAN ( ) |
| | profils dérivés ( ) ( ) |
| | Solaris Live Upgrade |
| | | création ( ) |
| | | exemple ( ) |
| | | exemple pour les archives différentielles ( ) |
| | | test ( ) |
| | tester ( ) ( ) |
|
| profils dérivés ( ) ( ) |
|
| programme bootlog-cgi, utilisation avec les installations et initialisations via connexion WAN ( ) |
|
| programme d'installation spécifiques à l'organisation ( ) |
|
| Programme suninstall de Solaris |
| | en comparaison avec d'autres méthodes d'installation ( ) |
| | procédures d'exécution ( ) |
|
| programme wanboot |
| | description ( ) |
|
| programme wanboot, installation de clés pour l'installation et initialisation via connexion WAN ( ) |
|
| programme wanboot |
| | installation sur le serveur d'initialisation via connexion WAN ( ) |
| | installation sur un serveur d'initialisation via connexion WAN ( ) |
| | spécification dans le fichier wanboot.conf ( ) |
| | stockage dans le répertoire document racine ( ) |
|
| programme wanboot-cgi |
| | copie vers le serveur d'initialisation via connexion WAN ( ) |
| | description ( ) |
| | sélection des informations de configuration du client ( ) |
| | spécification dans le fichier wanboot.conf ( ) |
| | stockage ( ) |
|
| programmewanboot, tâches effectuées lors de l'installation et initialisation via connexion WAN ( ) |
|
| programmewanboot-cgi, copie vers le serveur d'initialisation ( ) |
|
| protection de données lors de l'installation et initialisation via connexion WAN, à l'aide d'HTTPS ( ) |
|
| protection des données au cours d'une installation et initialisation via connexion WAN, avec une clé de chiffrement ( ) |
|
| protection des données durant une installation et initialisation via connexion WAN |
| | avec une clé de chiffrement ( ) |
| | avec une clé de hachage ( ) |
|
| protection des données lors de l'installation et initialisation via connexion WAN, à l'aide d'une clé de hachage ( ) |
|
| protocole SSL |
| | Voir SSL | |
|
| proxy Web, configuration minimale requise pour l'installation et initialisation via connexion WAN ( ) |
|
| proxy Web, préconfiguration ( ) |
|
| PXE (Preboot eXecution Environment) ( ) ( ) |
|
| PXE (Preboot Execution Environment) |
| | décrit ( ) |
| | directives ( ) |
| | exemples |
| | | ajout d'un client d'installation ( ) ( ) ( ) |
| | | création d'un serveur d'installation ( ) |
| | exigences de configuration du BIOS ( ) |
| | tâches ( ) |
| | | |
R |
|
| option -r de script check ( ) ( ) |
|
| règles |
| | description des champs ( ) ( ) |
| | exemples ( ) |
| | ordre de correspondance ( ) ( ) ( ) |
| | profils dérivés ( ) ( ) |
| | règles de correspondance rootdisk ( ) ( ) |
| | règles sur plusieurs lignes ( ) |
| | syntaxe ( ) |
| | tester la validité ( ) |
| | validation pour une installation et initialisation via connexion WAN ( ) |
|
| réinitialiser l'affichage et le terminal après des interruptions d'E/S ( ) |
|
| répertoire /etc/netboot |
| | autorisations ( ) |
| | configuration de l'authentification client et serveur ( ) ( ) ( ) |
| | configuration et fichiers de sécurité, description ( ) |
| | création ( ) |
| | description ( ) |
| | exemple ( ) |
| | insertion |
| | | certificat de confiance ( ) |
| | | certificat numérique ( ) ( ) ( ) |
| | | clé de chiffrement ( ) |
| | | clé de hachage ( ) |
| | | clé privée client ( ) ( ) |
| | partage des fichiers de configuration et de sécurité entre les clients ( ) ( ) |
| | stockage des fichiers de configuration et de sécurité |
| | | installations d'un client unique ( ) |
| | | installations du réseau complet ( ) |
| | | installations du sous-réseau complet ( ) |
|
| répertoire auto_install_sample |
| | copie de fichiers dans le répertoire JumpStart ( ) |
| | copie de fichiers vers le répertoire JumpStart ( ) |
| | copie des fichiers vers le répertoire JumpStart ( ) |
| | script check ( ) ( ) |
| | script de fin set_root_pw ( ) ( ) |
|
| répertoire de documents principal |
| | Voir répertoire document racine | |
|
| répertoire document racine |
| | description ( ) |
| | exemple ( ) ( ) |
|
| répertoire/etc/netboot, création ( ) |
|
| répertoire JumpStart |
| | ajout de fichiers à l'aide des scripts de fin ( ) ( ) |
| | autorisations ( ) |
| | copie de fichiers |
| | | fichiers d'installation ( ) ( ) |
| | | utilisation des scripts de fin ( ) |
| | copie des fichiers |
| | | fichiers d'installation ( ) |
| | création |
| | | disquette pour systèmes SPARC ( ) |
| | | disquette pour systèmes x86 ( ) |
| | | exemple ( ) |
| | | serveur ( ) |
| | créer |
| | | disquette pour systèmes x86 ( ) |
| | de création |
| | | d'une disquette pour les systèmes x86 ( ) |
| | exemple de fichier de règles ( ) |
| | partage ( ) ( ) |
| | permission ( ) |
|
| répertoire répertoire document racine, création ( ) |
|
| répertoires |
| | accéder |
| | | au répertoire JumpStart ( ) |
| | accès |
| | | répertoire JumpStart ( ) |
| | document racine |
| | | création ( ) |
| | | description ( ) |
| | | exemple ( ) |
| | documents racine |
| | | création ( ) |
| | | exemple ( ) |
| | /etc/netboot |
| | | configuration de l'authentification client et serveur ( ) |
| | | configuration et fichiers de sécurité, description ( ) |
| | | description ( ) |
| | | exemple ( ) |
| | | insertion d'un certificat de confiance ( ) |
| | | insertion d'un certificat numérique ( ) |
| | | insertion de la clé de chiffrement ( ) |
| | | insertion de la clé de hachage ( ) |
| | | insertion de la clé privée du client ( ) |
| | | partage des fichiers de configuration et de sécurité entre les clients ( ) |
| | | partage des fichiers de sécurité et de configuration ( ) |
| | | stockage des fichiers de configuration et de sécurité ( ) |
| | JumpStart |
| | | ajout de fichiers ( ) ( ) |
| | | autorisations ( ) |
| | | autorisations d'accès ( ) |
| | | copie de fichiers d'installation JumpStart ( ) |
| | | copie des fichiers ( ) |
| | | copie des fichiers d'installation ( ) ( ) ( ) |
| | | création de répertoires ( ) |
| | | création pour des systèmes ( ) |
| | | exemple de fichier de règles ( ) |
| | | partage d'un répertoire ( ) |
| | | partage de répertoire ( ) |
| | | permission ( ) |
| | modification |
| | | vers l'image du logiciel Solaris 9 Édition pour plate-forme x86 sur le disque local ( ) |
| | | vers l'image du logiciel Solaris 9 sur le disque local ( ) |
| | modifications |
| | | vers l'image du logiciel Solaris 9 Édition pour plate-forme SPARC sur le disque local ( ) |
| | répertoire /etc/netboot ( ) |
|
| réplique ( ) |
|
| répliques de bases de données d'état ( ) |
| | création de plusieurs répliques sur une seule tranche ( ) |
| | définition ( ) |
| | emplacement ( ) ( ) |
| | fonctionnement de base ( ) |
| | nombre minimum ( ) ( ) |
| | syntaxe ( ) |
|
| résolution, préconfiguration ( ) |
|
| resolve_hosts paramètre ( ) |
|
| rootdisk |
| | défini ( ) |
| | valeur de tranche pour filesys ( ) |
| | valeur définie par JumpStart ( ) ( ) |
|
| rules, test de validité ( ) |
| | | |
S |
|
| option -s de la commande add_install_client ( ) |
|
| SbootURI option DHCP |
| | description ( ) |
| | utilisation avec les installations et initialisations via connexion WAN ( ) |
|
| script check |
| | création d'un fichier rules.ok ( ) |
| | création du fichier custom_probes.ok ( ) |
| | custom_probes validation du fichier ( ) |
| | profils dérivés et ( ) |
| | rules validation du fichier ( ) |
| | test des règles ( ) |
| | tester des règles ( ) |
| | validation d'un fichier de règles ( ) |
| | validation des fichiers custom_probes ( ) |
| | validation du fichier rules ( ) |
|
| script de déploiement préalable |
| | création ( ) |
| | description ( ) |
|
| script de déploiement ultérieur, création ( ) |
|
| script de fin set_root_pw ( ) ( ) |
|
| script de réinitialisation, création ( ) |
|
| script de vérification |
| | syntaxe pour une installation et initialisation via connexion WAN ( ) |
| | test des règles ( ) |
|
| script préalable à la création, création ( ) |
|
| scripts |
| | archives Solaris Flash |
| | | création ( ) ( ) |
| | | déploiement préalable, création ( ) |
| | | réinitialisation ( ) |
| | scripts de Bourne shell dans les champs de règles ( ) |
| | scripts de début ( ) ( ) ( ) |
| | scripts de fin ( ) ( ) ( ) |
| | Solaris Flash archives |
| | | directives ( ) |
| | | personnalisation ( ) |
|
| scripts de Bourne shell dans les champs de règles ( ) |
|
| scripts de début |
| | autorisations ( ) |
| | champ de règle ( ) |
| | création de profils dérivés à l'aide de ( ) |
| | création de profils dérivés avec ( ) |
| | présentation ( ) |
| | programmes d'installation spécifiques à l'organisation ( ) |
|
| scripts de fin |
| | ajout de fichiers ( ) |
| | ajout de packages et de patchs ( ) |
| | champ de règle ( ) |
| | définition du mot de passe superutilisateur d'un système ( ) |
| | personnalisation de l'environnement superutilisateur ( ) |
|
| section utilisateur |
| | archives Solaris Flash |
| | | création ( ) |
|
| sécurité |
| | installation et initialisation via connexion WAN |
| | | description ( ) |
| | mot de passe superutilisateur ( ) ( ) |
|
| serveur d'enregistrement, spécification dans wanboot.conf fichier ( ) |
|
| serveur d'initialisation |
| | configuration minimum requise pour une installation réseau ( ) |
| | création sur le sous-réseau |
| | | à l'aide du DVD ( ) |
| | création sur un sous-réseau à l'aide d'un DVD ( ) |
| | création sur un sous-réseau à l'aide du CD ( ) |
| | description ( ) |
| | exemple de création à l'aide du DVD ( ) |
|
| serveur d'initialisation via connexion WAN |
| | configuration ( ) |
| | configuration minimale requise ( ) |
| | copie du programme wanboot-cgi ( ) |
| | description ( ) |
|
| serveur d'installation |
| | configuration de l'installation réseau à l'aide du CD ( ) |
| | configuration de l'installation réseau à l'aide du DVD ( ) |
| | création à l'aide d'un CD multiplates-formes ( ) ( ) |
| | création à l'aide d'un DVD ( ) |
| | création à l'aide d'un média multiplates-formes, ( ) |
| | création à l'aide du CD ( ) ( ) |
| | création à l'aide du CD, exemple ( ) ( ) |
| | création à l'aide du CD multiplates-formes, exemple ( ) ( ) |
| | création à l'aide du DVD ( ) |
| | création à l'aide du DVD, exemple ( ) ( ) ( ) ( ) |
| | création pour une installation PXE ( ) |
| | création pour une installation PXE, exemple ( ) |
| | sur le sous-réseau ( ) |
| | types de systèmes possibles ( ) |
| | configuration minimale requise pour l'installation et initialisation via connexion WAN ( ) |
|
| serveur de journalisation |
| | configuration en vue d'une installation et initialisation via connexion WAN ( ) |
| | configuration minimale requise pour l'installation et initialisation via connexion WAN ( ) |
| | configuration pour une installation et initialisation via connexion WAN ( ) |
| | description ( ) |
| | emplacement des messages enregistrés ( ) |
|
| serveur de l'initialisation via connexion WAN, caractéristiques requises pour le serveur Web ( ) |
|
| serveur de noms, préconfiguration ( ) |
|
| serveurs |
| | conditions pour l'installation réseau ( ) |
| | configuration d'une installation réseau avec CD |
| | | installation PXE ( ) |
| | configuration de l'installation réseau à l'aide du |
| | | installation autonome ( ) |
| | création d'un répertoire JumpStart ( ) |
| | espace racine ( ) |
| | installation réseau à l'aide d'un DVD |
| | | installation autonome ( ) |
| | journalisation (installation et initialisation via connexion WAN) ( ) |
| | installation et initialisation via connexion WAN |
| | | caractéristiques requises pour le logiciel du serveur Web ( ) |
| | | configuration minimale requise ( ) |
| | | descriptions ( ) |
| | | options de configuration ( ) |
|
| service de noms, préconfiguration ( ) |
|
| service DHCP |
| | configuration d'une installation et initialisation via connexion WAN ( ) |
| | configuration minimale requise pour l'installation et initialisation via connexion WAN ( ) |
| | création d'options pour l'installation de Solaris ( ) |
| | création de macros pour l'installation Solaris ( ) |
| | description ( ) |
| | échantillon de script pour l'ajout d'options et macros ( ) |
| | installation et initialisation du réseau Solaris ( ) |
| | options fournisseur de Sun pour les installations et initialisations via connexion WAN ( ) |
|
| setup_install_server |
| | description ( ) |
| | pour l'installation et initialisation via connexion WAN ( ) |
|
| SHTTPproxy option DHCP |
| | description ( ) |
| | utilisation dans le cadre d'une installation et initialisation via connexion WAN ( ) |
|
| SI_CONFIG_DIR variable ( ) |
|
| SI_PROFILEvariable d'environnement ( ) |
|
| signe égal (=) dans le champ Profil ( ) |
|
| SjumpsCF paramètre ( ) ( ) |
|
| Solaris 9 logiciels |
| | groupes |
| | | exemples de profils ( ) |
|
| Solaris Live Upgrade |
| | activation d'un environnement d'initialisation ( ) |
| | affichage |
| | | d'écrans à partir d'un système distant ( ) |
| | afficher |
| | | configuration des environnements d'initialisation ( ) |
| | afficher le nom de l'environnement d'initialisation ( ) |
| | annuler une tâche ( ) |
| | arrêter ( ) |
| | changer le nom d'un environnement d'initialisation ( ) |
| | commandes ( ) |
| | comparer des environnements d'initialisation ( ) |
| | configuration des systèmes de fichiers ( ) |
| | copier |
| | | un système de fichiers partageable ( ) |
| | création |
| | | d'un profil ( ) |
| | | d'un volume RAID-1 (miroir), configuration minimale requise ( ) |
| | | d'une Solaris Flash archive différentielle ( ) |
| | | liste des tâches ( ) |
| | | volume RAID-1 (miroir), description ( ) |
| | créer |
| | | personnalisation du contenu, tâches ( ) |
| | | un environnement d'initialisation, tâches ( ) |
| | | un environnement d'initialisation,description ( ) |
| | | volume RAID-1 (miroir), tasks ( ) |
| | démarrer ( ) |
| | description ( ) |
| | espace disque minimum requis ( ) |
| | exemples ( ) |
| | | création d'un environnement d'initialisation vide ( ) |
| | | création d'une archive différentielle Solaris Flash ( ) |
| | | création de miroirs ( ) ( ) |
| | | création de volumes RAID-1 ( ) ( ) ( ) |
| | | mise à niveau d'un volume RAID-1 ( ) ( ) |
| | | personnalisation du contenu ( ) ( ) |
| | | processus complet ( ) |
| | imprimer dans un fichier ( ) |
| | installation |
| | | d'une archive Solaris Flash à l'aide d'un profil ( ) |
| | | d'une Solaris Flash archive ( ) |
| | | d'une Solaris Flash archive à l'aide d'un profil ( ) |
| | | packages ( ) |
| | mise à niveau |
| | | d'un environnement d'initialisation ( ) |
| | | liste des tâches ( ) |
| | mots-clés |
| | | profil ( ) ( ) |
| | mots-clés pour les volumes ( ) |
| | packages requis ( ) |
| | personnalisation du contenu ( ) |
| | profil, exemple ( ) |
| | profil, exemple pour les archives différentielles ( ) |
| | profil, test ( ) |
| | récupération d'un échec de mise à niveau ( ) |
| | sélection de tranches pour les volumes RAID-1 (miroirs) ( ) |
| | supprimer un environnement d'initialisation ( ) |
| | tranches d'un système de fichiers ( ) |
|
| Solaris Volume Manager |
| | commandes utilisées avec Solaris Live Upgrade ( ) |
| | création de volumes au cours de l'utilisation de la méthode JumpStart personnalisée |
| | | exemple ( ) |
| | exemple Solaris Live Upgrade |
| | | migration vers un volume RAID-1 ( ) |
| | Solaris Live Upgrade exemple |
| | | séparation et mise à niveau d'un volume RAID-1 ( ) |
|
| Solaris Web Start |
| | configuration minimale |
| | | taille de swap ( ) |
| | contraintes |
| | | LBA sur systèmes x86 ( ) |
| | en comparaison avec d'autres méthodes d'installation ( ) |
| | interface de ligne de commande ( ) |
| | interface utilisateur graphique ( ) |
| | manières d'exécuter ( ) |
| | programme d'installation ( ) |
|
| sous-miroir ( ) |
| | directives ( ) |
|
| sous-miroir, description ( ) |
|
| sous-réseau |
| | création d'un serveur d'initialisation à l'aide du ( ) |
| | création d'un serveur d'initialisation à l'aide du DVD ( ) |
| | install server ( ) |
| | serveur d'installation ( ) ( ) |
|
| SSL, utilisation dans le cadre d'une installation et initialisation via connexion WAN ( ) |
|
| SsysidCF paramètre ( ) ( ) |
|
| SUNWCall group ( ) |
|
| SUNWCprog group ( ) |
|
| SUNWCreq group ( ) |
|
| SUNWCuser group ( ) |
|
| SUNWCXall group ( ) |
|
| suppression, clusters au cours de la mise à niveau ( ) |
|
| supprimer |
| | des packages de groupes de logiciels ( ) |
| | un environnement d'initialisation Live Upgrade ( ) |
|
| syntaxe de la commande boot pour une installation et initialisation via connexion WAN ( ) |
|
| syntaxe de la commande bootconfchk ( ) |
|
| syntaxe de la commande flar create, pour une installation et initialisation via connexion WAN ( ) |
|
| syntaxe de setup_install_server, pour une installation et initialisation via connexion WAN ( ) |
|
| sysidcfg file, mot-clé network_interface, description ( ) |
|
| system.conf fichier |
| | Voir fichier de configuration système | |
|
| système autonomes, exemples de profil ( ) |
|
| système de fichiers /export ( ) |
|
| système de fichiers d'initialisation via connexion WAN, description ( ) |
|
| système maître |
| | Voir aussi archive | |
| | description ( ) |
| | périphériques ( ) |
| | personnalisation d'une installation de ( ) |
| | procédure d'installation ( ) |
|
| systèmes autonomes, exemple d'installation JumpStart personnalisée ( ) |
|
| systèmes clone |
| | Voir aussi archive | |
| | description ( ) |
|
| systèmes de fichiers critiques, définition ( ) |
|
| systèmes de fichiers distants, montage ( ) |
|
| systèmes de fichiers partageables, définition ( ) |
|
| systèmes de fichiers racine (/), exemples de profils ( ) |
|
| systèmes de fichiers racine (/), packages adaptés à un environnement d'initialisation inactif ( ) |
|
| systèmes de fichiers swap |
| | affectation de swap ( ) |
| | détermination de la taille ( ) |
| | espace swap d'un client sans disque ( ) |
| | exemples de profils ( ) |
| | Solaris Live Upgrade |
| | | directives pour la sélection d'une tranche ( ) |
| | | personnalisation ( ) ( ) |
| | taille de mémoire et ( ) |