| Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for Sun Blade T6340 Server Modules |
|
| Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for Sun Blade T6340 Server Modules |
|
Documentation, Support, and Training
Understanding ILOM for the Sun Blade T6340 Server Module
Chassis Monitoring Module Features
Resetting the Password to the Factory Default
Viewing and Configuring Host Control Information
Managing Host Diagnostics and POST
Managing System User Interactions
Managing the Service Processor
Changing Service Processor Settings to Factory Defaults
Change Console Escape Characters (CLI)
Changing Configuration Policy Settings
Managing Power Usage and Monitoring Power Consumption
Monitoring Active System Faults
Managing Virtual Keyswitch Settings
Configuring the Host for Using Remote Console With OpenBoot
Configuring the Host at the OpenBoot Prompt
Resetting the Variables to the Defaults Using ILOM
Resetting the output-device and input-device Variables to Factory Default
Resetting All OpenBoot NVRAM Variable to Factory Defaults
Configuring the Host for Using Remote Console With Solaris OS
Sensors on the Sun Blade T6340 Server Module
Indicators on the Sun Blade T6340 Server Module
Limits to Backward Compatibility
Create an ALOM CMT Compatibility Shell
Switch Between the ALOM CMT Shell and the Host Console
Return to the ILOM From the ILOM CMT Shell
Comparing ILOM and ALOM CMT Commands
Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
Become root, then type:
# eeprom output-device=rscreen # eeprom input-device=rkeyboard
Activate the change by using the reboot command.
The console no longer provides output.
Exit the console to return to the ILOM SP, using the ILOM escape sequence:
# #.
The default ILOM escape sequence is #. (hash period).
Start the ILOM Remote Video Console from the browser interface.
See “Configuring ILOM for Remote Management” on page 49 for more information.
When you want to stop using Remote Console, change the values of the variables accordingly.
The default value for both variables is virtual-console. For more information about setting these variables for available connection methods, refer to the Sun Blade T6340 Server Module Installation and Administration Guide.
|
