Exit Print View

Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for Sun Blade T6340 Server Modules

Get PDF Book Print View

Document Information

Using This Documentation

Related Documentation

Documentation, Support, and Training

Documentation Feedback

Understanding ILOM for the Sun Blade T6340 Server Module

ILOM Overview

Chassis Monitoring Module Features

Updating the System Firmware

Resetting the Password to the Factory Default

Managing the Host

Resetting the Host

Managing Host Boot Mode

Viewing and Configuring Host Control Information

Managing Host Diagnostics and POST

Managing System User Interactions

Managing the Service Processor

Storing Customer Information

Changing Service Processor Settings to Factory Defaults

Display Console History (CLI)

Change Console Escape Characters (CLI)

Changing Configuration Policy Settings

Specify Backup of the User Database (CLI)

Restore Host Power State at Restart (CLI)

Specify Host Power State at Restart (CLI)

Disable or Re-Enable Power-On Delay (CLI)

Manage Configuration Policy Settings (Web Interface)

Managing Power Usage and Monitoring Power Consumption

Managing Network Access

Managing SSH Server Settings

Monitoring Active System Faults

Managing Devices

Managing Virtual Keyswitch Settings

Using the Remote Console

Hardware Connection Options

Configuring the Host for Using Remote Console With OpenBoot

Configuring the Host for Using Remote Console With Solaris OS

IPMI Sensor Reference

Sensors on the Sun Blade T6340 Server Module

Indicators on the Sun Blade T6340 Server Module

ALOM CMT Compatibility Shell

Limits to Backward Compatibility

Create an ALOM CMT Compatibility Shell

Switch Between the ALOM CMT Shell and the Host Console

Return to the ILOM From the ILOM CMT Shell

Comparing ILOM and ALOM CMT Commands

ALOM CMT Variables

ALOM CMT Variable Comparison

Event Messages Available Through the ALOM Compatibility Shell

Event Message Overview

Event Severity Levels

Service Processor Usage Event Messages

Environmental Monitoring Event Messages

Host Monitoring Event Messages

SCC Backup and Restore

Information Stored on the SCC


Restore Host Power State at Restart (CLI)

Use the /SP/policy HOST_LAST_POWER_STATE property to control the behavior of the server after an unexpected power outage. When external power is restored, the ILOM service processor starts to run automatically. Normally, the host power is not turned on until you use ILOM to turn it on.

ILOM records the current power state of the server in nonvolatile storage. If the HOST_LAST_POWER_STATE policy is enabled, ILOM can restore the host to the previous power state. This policy is useful in the event of a power failure, or if you physically move the server to a different location.

For example, if the host server is running when power is lost and the /SP/policy HOST_LAST_POWER_STATE property is set to disabled, the host server remains off when power is restored. If the /SP/policy HOST_LAST_POWER_STATE property is set to enabled, the host server restarts when the power is restored.