About This Documentation (PDF and HTML)
Introduction to Diagnostic Tools
Diagnostic Tools for Oracle Servers
Using the Diagnostic Tools to Troubleshoot a Server
U-Boot Diagnostic Startup Tests
U-Boot Diagnostic Startup Tests Overview
Running the U-Boot Diagnostic Tests
Sample SP Environmental Variables Showing U-Boot Test Status
Accessing Pc-Check Diagnostics Utility
How to Access and Run Pc-Check From the Tools and Drivers CD/DVD
How to Access and Run Pc-Check From a USB Device
How to Set Up the Tools and Drivers CD/DVD Image on the PXE Server
How to Access the Tools and Drivers CD/DVD From the Target Server
This section provides instructions for accessing the Pc-Check diagnostics utility that might be included on your server’s Tools and Drivers CD/DVD. Use these procedures, if your server does not contain a service processor (SP).
Note - If your server contains an SP, the Pc-Check diagnostics utility is integrated with the SP firmware, enabling you to access the software through your server’s ILOM command-line interface (CLI) or web interface. For information, see How to Access Pc-Check Through the ILOM CLI or .How to Access Pc-Check Through the ILOM Web Interface
Use any of the following methods to access the Pc-Check diagnostics utility: