About This Documentation (PDF and HTML)
Introduction to Diagnostic Tools
Diagnostic Tools for Oracle Servers
Using the Diagnostic Tools to Troubleshoot a Server
U-Boot Diagnostic Startup Tests
U-Boot Diagnostic Startup Tests Overview
Running the U-Boot Diagnostic Tests
Sample SP Environmental Variables Showing U-Boot Test Status
Accessing Pc-Check Diagnostics Utility
Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD
How to Access and Run Pc-Check From the Tools and Drivers CD/DVD
How to Access and Run Pc-Check From a USB Device
How to Set Up the Tools and Drivers CD/DVD Image on the PXE Server
How to Access the Tools and Drivers CD/DVD From the Target Server
This section explains how to use the Pc-Check diagnostics utility. If you are having a problem with your system, use the DOS-based Pc-Check utility to troubleshoot and solve the problem.
Pc-Check is integrated into the service processor (SP) firmware, enabling you to access the software through your server’s ILOM command-line interface (CLI) or web interface. If your server does not contain an SP, you can install and access the Pc-Check utility from your server Tools and Drivers CD/DVD (see Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD).
Note - Your server Tools and Drivers CD/DVD typically is shipped as part of the server Documentation and Media kit.
Topics contained in this section include: