Hardware Required

For the control network, you need an Ethernet hub and an RJ-45 cable for each machine, to connect the hme1 interface on each host in the array to the hub. It is not critical for the operation of the control network that your hub support 100 Mbs. The hme1 interface supports either 10 or 100 Mbs.

If you have a two-host array and do not have a hub, you need a back-to-back RJ-45 cable.

If you plan to establish a TTY connection to your Netra Proxy Cache Server, you need a serial cable. See Appendix A, Establishing a tip Connection," for requirements.