raidconfig Error Codes - Oracle Server CLI Tools and IPMItool 2.1 User's Guide

Errors might be returned if you are attempting to configure the RAID entry to an unsupported parameter. For example, if the RAID controller does not support the configured RAID level, the CLI displays a user-friendly error string identifying the misconfiguration and returns a matching error code.

The list of error codes and strings specific to this tool are show in the following table.

Table 2 raidconfig Error Codes

Code Number	Error Description
100	No controllers available.
101	Controller does not support RAID.
102	No physical disks associated with controller.
103	Invalid controller.
104	Invalid disk.
105	Invalid RAID volume.
106	RAID level not supported by controller.
107	Default RAID level not supported.
108	A defined disk is in use.
109	Number of disks exceeds allowed number for this level.
110	Failure retrieving internal data.
111	Number of disks requested exceeds the number of available disks.
112	Cannot define both actual and requested number of disks.
113	Option not supported by controller.
114	Invalid stripe size for controller.
115	Invalid leg size for controller.
116	Cannot retrieve RAID data.
118	RAID creation failure.
119	RAID deletion failure.
120	Disk defined multiple times.
121	Disks must be in the same controller.
122	The maximum number of RAID Volumes has been created.
123	Invalid RAID configuration.
124	The RAID Volume is in use.
125	Incomplete RAID configuration.
126	Failure writing internal data.
127	Command requires disks to be entered.
128	Disk is not a dedicated spare.
129	Disk is not a global spare.
130	Controller does not support dedicated spares.
131	Controller does not support global spares.
132	Command requires disks or RAID volume to be entered.
133	A defined disk is not in a RAID volume.
134	Cannot set both read and write cache in same command.

Skip Navigation Links
Exit Print View
	Oracle Server CLI Tools and IPMItool 2.1 User's Guide