Skip Navigation Links | |
Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM ) 3.0 Supplement for the Sun Blade X6275 M2 Server Module |
About This Documentation (PDF and HTML)
Overview of the ILOM Supplement
Dual-Node Identification In CMM ILOM
Clearing Server and CMM Faults
Managing Power Usage and Monitoring Power Consumption
How to View Power Management Properties Using the Web Interface
How to View Power Management Properties Using the CLI
Configuring the Server Power Restore Policy
How to Set the Server Power Restore Policy Using the ILOM Web Interface
How to Set the Server Power Restore Policy Using the ILOM CLI
Switching the Default Serial Port Output Between SP and Host Console
How to Switch Default Serial Port Output Using the ILOM Web Interface
How to Switch Default Serial Port Output Using the ILOM CLI
Determining Current Firmware Versions
How to Verify the BIOS and ILOM Firmware Versions Using the Web Interface
How to Verify the BIOS and ILOM Firmware Versions Using the CLI
How to Download Firmware Updates
How to Update the System BIOS and ILOM Firmware Using the ILOM Web Interface
How to Update the System BIOS and ILOM Firmware Using the ILOM CLI
Alternate Methods for Updating the System BIOS and ILOM Firmware
Resetting the Service Processor After an Update
Clearing CMOS Settings After an Update (Optional)
Using the edit Command and Configuring the Preboot Menu For Remote Access
Resetting the Root Password to the Factory Default
Restoring ILOM Access to the Serial Console
Recovering the SP Firmware Image
Indicators, Sensors, and Traps
The following procedures describe two different methods for updating the ILOM and system BIOS.
How to Update the System BIOS and ILOM Firmware Using the ILOM Web Interface
How to Update the System BIOS and ILOM Firmware Using the ILOM CLI
Caution - ILOM enters a special mode to load new firmware. Note the following requirements. 1) The node host power must remain off, so the node ILOM must be accessed from another system on the network to perform the upgrade. 2) No other tasks can be performed in the node's ILOM until the firmware upgrade is complete and the ILOM is reset. To ensure a successful update, do not attempt to modify the node's ILOM configuration, or use other ILOM interfaces (Web, CLI, SNMP, or IPMI) during the update process. Wait until after the update succeeds before making further node ILOM configuration changes. The update takes about 20 minutes. |