JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
System Administration Guide: IP Services     Oracle Solaris 11 Express 11/10
search filter icon
search icon

Document Information


Part I TCP/IP Administration

1.  Planning an IPv4 Addressing Scheme (Tasks)

2.  Planning an IPv6 Addressing Scheme (Overview)

3.  Planning an IPv6 Network (Tasks)

4.  Configuring TCP/IP Network Services and IPv4 Addressing (Tasks)

5.  Enabling IPv6 on a Network (Tasks)

6.  Administering a TCP/IP Network (Tasks)

7.  Configuring IP Tunnels

8.  Troubleshooting Network Problems (Tasks)

9.  TCP/IP and IPv4 in Depth (Reference)

10.  IPv6 in Depth (Reference)


11.  About DHCP (Overview)

12.  Planning for DHCP Service (Tasks)

13.  Configuring the DHCP Service (Tasks)

14.  Administering DHCP (Tasks)

15.  Configuring and Administering the DHCP Client

16.  Troubleshooting DHCP (Reference)

17.  DHCP Commands and Files (Reference)

Part III IP Security

18.  IP Security Architecture (Overview)

19.  Configuring IPsec (Tasks)

20.  IP Security Architecture (Reference)

21.  Internet Key Exchange (Overview)

22.  Configuring IKE (Tasks)

23.  Internet Key Exchange (Reference)

24.  IP Filter in Oracle Solaris (Overview)

25.   IP Filter (Tasks)

Part IV Networking Performance

26.  Integrated Load Balancer Overview

27.  Configuration of Integrated Load Balancer Tasks

28.  Virtual Router Redundancy Protocol (Overview)

29.  VRRP Configuration (Tasks)

30.  Implementing Congestion Control

Part V IP Quality of Service (IPQoS)

31.  Introducing IPQoS (Overview)

32.  Planning for an IPQoS-Enabled Network (Tasks)

33.  Creating the IPQoS Configuration File (Tasks)

34.  Starting and Maintaining IPQoS (Tasks)

35.  Using Flow Accounting and Statistics Gathering (Tasks)

Setting Up Flow Accounting (Task Map)

Recording Information About Traffic Flows

How to Create a File for Flow-Accounting Data

Gathering Statistical Information

36.  IPQoS in Detail (Reference)



Gathering Statistical Information

You can use the kstat command to generate statistical information from the IPQoS modules. Use the following syntax:

/bin/kstat -m ipqos-module-name

You can specify any valid IPQoS module name, as shown in Table 36-5. For example, to view statistics that are generated by the dscpmk marker, you use the following form of kstat:

/bin/kstat -m dscpmk

For technical details, refer to the kstat(1M) man page.

Example 35-1 kstat Statistics for IPQoS

Here is an example of possible results from running kstat to obtain statistics about the flowacct module.

# kstat -m flowacct
module: flowacct                        instance: 3     
name:   Flowacct statistics             class:    flacct 
        bytes_in_tbl                    84
        crtime                          345728.504106363
        epackets                        0
        flows_in_tbl                    1
        nbytes                          84
        npackets                        1
        snaptime                        345774.031843301
        usedmem                         256
class: flacct

Gives the name of the class to which the traffic flows belong, in this example flacct.


Total number of bytes in the flow table. The total number of bytes is the sum in bytes of all the flow records that currently reside in the flow table. The total number of bytes for this flow table is 84. If no flows are in the table, the value for bytes_in_tbl is 0.


The last time that this kstat output was created.


Number of packets that resulted in an error during processing, in this example 0.


Number of flow records in the flow table, which in this example is 1. When no records are in the table, the value for flows_in_tbl is 0.


Total number of bytes that are seen by this flowacct action instance, which is 84 in the example. The value includes bytes that are currently in the flow table. The value also includes bytes that have timed out and are no longer in the flow table.


Total number of packets that are seen by this flowacct action instance, which is 1 in the example. npackets includes packets that are currently in the flow table. npackets also includes packets that have timed out—are no longer in the flow table.


Memory in bytes in use by the flow table that is maintained by this flowacct instance. The usedmem value is 256 in the example. The value for usedmem is 0 when the flow table does not have any flow records.