Skip Navigation Links | |
Exit Print View | |
Sun Server X2-8 Product Documentation Sun Server X2-8 (formerly Sun Fire X4800 M2) Documentation Library |
Communicating With Oracle ILOM and the System Console
About Oracle ILOM SP IP Addresses and the Oracle ILOM Interfaces
How to Get the SP IP Address by Using the BIOS Setup Utility
How to Get the SP IP Address by Using a Serial Connection and the CLI
How to Connect to Oracle ILOM CLI Using the Serial Management Port
How to Connect to the Oracle ILOM CLI Using SSH
Connecting to the System Console
How to Connect to the Server Locally (Physical Console)
How to Connect to the Host's Serial Console Using the Oracle ILOM Command-Line Interface
How to Connect Remotely Using the Oracle ILOM Web Interface
Before You Begin
Perform the hardware setup as described in the hardware setup documentation.
Apply standby power to the server by connecting AC power to the system power supply. See How to Apply Standby Power for Initial Service Processor Configuration.
If this is the first time logging in to Oracle ILOM, you can use the default account root and password changeme.
Note - To enable first-time login and access to Oracle ILOM, a default Administrator account and its password are provided with the system. To build a secure environment and enforce user authentication and authorization in Oracle ILOM, you must change the default password (changeme) for the default Administrator account (root) after your initial login to Oracle ILOM. If this default Administrator account has since been changed, contact your system administrator for an Oracle ILOM user account with Administrator privileges.