|Skip Navigation Links|
|Exit Print View|
|Oracle Solaris Cluster Reference Manual Oracle Solaris Cluster 4.0|
- add, remove, and configure a quorum server type of quorum device.
scconf [-q quorum-options]
Note - Oracle Solaris Cluster software includes an object-oriented command set. Although Oracle Solaris Cluster software still supports the original command set, Oracle Solaris Cluster procedural documentation uses only the object-oriented command set. For more information about the object-oriented command set, see the Intro(1CL) man page.
Oracle Solaris Cluster provides the option of configuring a quorum server as a quorum device. This configuration information consists of a device name that must be unique across quorum devices, the address of the host machine on which the quorum server is running, and the port number on which the quorum server is listening for requests. If your cluster requires multiple quorum devices, configure multiple quorum servers or use storage devices for the additional quorum devices. A quorum server can act as only one quorum device for a cluster.
To configure the cluster to use a quorum server, the quorum server software must be installed, configured, and running on a machine that is accessible to all cluster nodes. The quorum server itself must be configured and running when this command is run on a cluster node. See clquorumserver(1CL) for information about configuring the quorum server.
The following parameters are required for configuring a quorum server type of quorum device. See scconf(1M) for the list of supported generic options.
Use the add and remove forms of the command to add shared quorum devices to and remove shared quorum devices from the configuration file. Use the change form of the command to change various cluster quorum configuration properties or states. The following quorum server specific options can be used to change the cluster quorum configuration:
Before adding a quorum device:
The quorum server must be running on the quorum server host machine.
You must enter the quorum server host name in the /etc/inet/hosts file.
You must set the netmask for the quorum server host.
For information about the hosts file and netmask requirements, see the procedure on adding quorum server quorum devices in the Oracle Solaris Cluster System Administration Guide. Once the quorum device is added, none of the parameters can be changed.
# scconf –q -a name=devicename,type=quorum_server,qshost=qhost,port=portnumber
The name of a quorum server. This name must be unique among all quorum devices in the system.
Indicates the type of disk device group to create. For a quorum server type of quorum device, the value of this parameter must be quorum_server.
The hostname of the machine on the network that can be reached by all cluster nodes and that is running the quorum server. Depending on the IPv4 or IPv6 configuration of the host, this hostname must have an entry in the /etc/hosts file, the /etc/inet/ipnodes file, or both.
The port on which the quorum server listens for requests.
Note - If you need to change the port number of a quorum server while maintaining the same host name, remove the quorum device first, make your changes, then add the quorum device back.
# scconf -c -q name=devicename,maintstate | reset
If other parameters such as qshost or port must be changed, add a new quorum device with the new parameters and remove the existing quorum device.
# scconf -q name=devicename
When the scconf command is interrupted or fails while performing quorum-related operations, quorum configuration information can become inconsistent in the cluster configuration database. If this occurs, either run the same scconf command again or run the scconf command with the reset option to reset the quorum information.
Example 1 Adding a Quorum Server Type of Quorum Device
The following scconf command adds a quorum server quorum device with its port number configured as 9000.
# scconf –q -a name=qd1,type=quorum_server,qshost=scclient1,port=9000
Example 2 Removing a Quorum Server Type of Quorum Device
The following scconf command removes the quorum server quorum device named qd1.
# scconf -r –q name=qd1
See attributes(5) for descriptions of the following attributes: