ナビゲーションリンクをスキップ | |
印刷ビューの終了 | |
Oracle Solaris 11 システムのインストール Oracle Solaris 11 Information Library (日本語) |
パート I Oracle Solaris 11 のインストールオプション
6. Oracle Solaris インスタンスの構成解除または再構成
インストールを開始するには、クライアントをブートします。このセクションでは、SPARC または x86 クライアントをブートする方法を正確に示します。また、インストールの進捗状況をリモートから監視する方法についても説明します。
ssh を使用することで、自動インストールクライアントへのネットワークアクセスを有効にできます。このアクセスを使用すると、進行中のインストールをリモートから監視できます。
リモートアクセスは、インストール設定ファイルでオプション livessh を enable に設定することで有効にします。このアクセスが有効になっている場合は、ユーザー名 jack とパスワード jack を使用して AI クライアントにログインできます。
x86 システムの場合、menu.lst 構成ファイルが次の方法で作成されます。
installadm create-client コマンドを使用した場合、ファイル名は /etc/netboot/menu.lst.01MAC_address です。ここで、MAC_address は installadm create-client コマンドで指定された MAC アドレスです。
installadm create-client コマンドを使用しなかった場合、ファイル名は /etc/netboot/service_name/menu.lst です。ここで、service_name は installadm create-service コマンドで作成されたインストールサービスの名前です。
このファイルでは、オプションはカーネルのパラメータとして指定されます。次の例では、livessh オプションと install_debug オプションは enable に設定されています。
kernel$ ... -B install_media=...,livessh=enable,install_debug=enable
SPARC システムの場合、/etc/netboot ディレクトリ下にマウントされたサービスのネットイメージディレクトリ /etc/netboot/svcname/system.conf を介して system.conf ファイルにアクセスできます。
system.conf ファイルでは、オプションは名前と値のペアとして定義されます。次の例では、livessh オプションは enable に設定されています。
$ cat /etc/netboot/svc1/system.conf ... livessh=enable ...
OBP プロンプトから SPARC クライアントをブートするには、次のコマンドを使用します。
ok boot net:dhcp - install
SPARC クライアントの AI ブート中に、次のイベントが発生します。
クライアントがブートし、DHCP サーバーから IP アドレスと wanboot-cgi ファイルの場所を取得します。
wanboot-cgi プログラムが wanboot.conf を読み取り、WAN ブートバイナリの場所をクライアントに送信します。
WAN ブートバイナリが HTTP を使用してダウンロードされ、クライアントが WAN ブートプログラムをブートします。
WAN ブートが boot_archive ファイルを取得し、Oracle Solaris OS がブートされます。
イメージのアーカイブである solaris.zlib と solarismisc.zlib が、HTTP を使用してダウンロードされます。
AI マニフェストとシステム構成プロファイルが、mDNS 検索または system.conf ファイルのどちらかで指定された AI インストールサービスからダウンロードされます。
AI インストールプログラムが AI マニフェストを使用して呼び出され、クライアントへの Oracle Solaris OS のインストールを実行します。
ブート処理によって次の出力が表示されます。
{0} ok boot net:dhcp - install SPARC Enterprise T5120, No Keyboard Copyright 2008 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.29.1, 16256 MB memory available, Serial #81036844. Ethernet address 0:14:4f:d4:86:2c, Host ID: 84d4862c. Boot device: /pci@0/pci@0/pci@1/pci@0/pci@2/network@0:dhcp File and args: - install 1000 Mbps full duplex Link up Timed out waiting for BOOTP/DHCP reply <time unavailable> wanboot info: WAN boot messages->console <time unavailable> wanboot info: configuring /pci@0/pci@0/pci@1/pci@0/pci@2/network@0:dhcp 1000 Mbps full duplex Link up <time unavailable> wanboot info: Starting DHCP configuration <time unavailable> wanboot info: DHCP configuration succeeded <time unavailable> wanboot progress: wanbootfs: Read 368 of 368 kB (100%) <time unavailable> wanboot info: wanbootfs: Download complete Fri Aug 26 14:34:53 wanboot progress: miniroot: Read 221327 of 221327 kB (100%) Fri Aug 26 14:34:53 wanboot info: miniroot: Download complete SunOS Release 5.11 Version snv_175 64-bit Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. Remounting root read/write Probing for device nodes ... Preparing network image for use Downloading solaris.zlib --2011-08-26 13:47:31-- http://host1:5555/install/images/sparc_snv175//solaris.zlib idn_decode failed (9): `System iconv failed' Resolving host1... 10.80.238.5 idn_decode failed (9): `System iconv failed' Connecting to host1|10.80.238.5|:5555... connected. HTTP request sent, awaiting response... 200 OK Length: 135977984 (130M) [text/plain] Saving to: `/tmp/solaris.zlib' 100%[======================================>] 135,977,984 22.3M/s in 6.0s 2011-08-26 13:47:37 (21.7 MB/s) - `/tmp/solaris.zlib' saved [135977984/135977984] Downloading solarismisc.zlib --2011-08-26 13:47:37-- http://host1:5555/install/images/sparc_snv175//solarismisc.zlib idn_decode failed (9): `System iconv failed' Resolving host1... 10.80.238.5 idn_decode failed (9): `System iconv failed' Connecting to host1|10.80.238.5|:5555... connected. HTTP request sent, awaiting response... 200 OK Length: 18826752 (18M) [text/plain] Saving to: `/tmp/solarismisc.zlib' 100%[======================================>] 18,826,752 21.7M/s in 0.8s 2011-08-26 13:47:37 (21.7 MB/s) - `/tmp/solarismisc.zlib' saved [18826752/18826752] Downloading .image_info --2011-08-26 13:47:37-- http://host1:5555/install/images/sparc_snv175//.image_info idn_decode failed (9): `System iconv failed' Resolving host1... 10.80.238.5 idn_decode failed (9): `System iconv failed' Connecting to host1|10.80.238.5|:5555... connected. HTTP request sent, awaiting response... 200 OK Length: 82 [text/plain] Saving to: `/tmp/.image_info' 100%[======================================>] 82 --.-K/s in 0s 2011-08-26 13:47:37 (2.22 MB/s) - `/tmp/.image_info' saved [82/82] Done mounting image Configuring devices. Hostname: solaris Service discovery phase initiated Service name to look up: default-sparc Service discovery finished successfully Process of obtaining install manifest initiated Using the install manifest obtained via service discovery Automated Installation started The progress of the Automated Installation will be output to the console Detailed logging is in the logfile at /system/volatile/install_log Press RETURN to get a login prompt at any time. solaris console login: 13:48:35 Install Log: /system/volatile/install_log 13:48:35 Using XML Manifest: /system/volatile/ai.xml 13:48:35 Using profile specification: /system/volatile/profile 13:48:35 Using service list file: /var/run/service_list 13:48:35 Starting installation. 13:48:35 0% Preparing for Installation 13:48:36 100% manifest-parser completed. 13:48:36 0% Preparing for Installation 13:48:36 1% Preparing for Installation 13:48:37 2% Preparing for Installation 13:48:37 3% Preparing for Installation 13:48:37 4% Preparing for Installation 13:48:47 7% target-discovery completed. 13:48:47 === Executing Target Selection Checkpoint == 13:48:48 Selected Disk(s) : c3t0d0 13:48:48 13% target-selection completed. 13:48:48 17% ai-configuration completed. 13:49:01 19% target-instantiation completed. 13:49:02 19% Beginning IPS transfer 13:49:02 Creating IPS image 13:50:58 Installing packages from: 13:50:58 solaris 13:50:58 origin: http://pkg.example.com/solaris/ 14:48:40 21% generated-transfer-1491-1 completed. 14:48:41 23% initialize-smf completed. 14:48:43 Installing SPARC bootblk to root pool devices: ['/dev/rdsk/c3t0d0s0'] 14:48:43 Setting openprom boot-device 14:48:44 33% boot-configuration completed. 14:48:44 35% update-dump-adm completed. 14:48:45 37% setup-swap completed. 14:48:45 40% set-flush-ips-content-cache completed. 14:48:47 42% device-config completed. 14:48:49 44% apply-sysconfig completed. 14:48:49 46% transfer-zpool-cache completed. 14:49:03 87% boot-archive completed. 14:49:04 89% transfer-ai-files completed. 14:49:04 99% create-snapshot completed. 14:49:05 Automated Installation succeeded. 14:49:05 You may wish to reboot the system at this time. Automated Installation finished successfully The system can be rebooted now Please refer to the /system/volatile/install_log file for details After reboot it will be located at /var/sadm/system/logs/install_log
次のいずれかの方法を使用してネットワークからブートすることによって、x86 クライアントのインストールを開始します。
適切なファンクションキーを押します。たとえば、一部のシステムでは、ネットワークからブートするために F12 キーを使用します。
BIOS 内のブート順序を変更します。
クライアントがブートしたら、ブートするネットワークデバイスを選択します。
x86 クライアントの AI ブート中に、次のイベントが発生します。
クライアントがブートし、IP アドレスを取得します。ブートファイル pxegrub が、DHCP サーバーによって提供された場所からダウンロードされます。
pxegrub ブートファイルが読み込まれ、menu.lst ファイルを読み取ります。
pxegrub ブートファイルが boot_archive ファイルを取得し、TFTP を使用して Oracle Solaris OS がブートされます。
GRUB メニューによって提供される HTTP を使用して、ネットイメージのアーカイブ solaris.zlib および solarismisc.zlib がダウンロードされます。
AI マニフェストとシステム構成プロファイルが、mDNS 検索またはブートされた GRUB メニューエントリで指定された AI インストールサービスからダウンロードされます。
AI マニフェストで AI インストールプログラムが呼び出され、インストールが実行されます。
システムの PXE ブートが正常に行われると、次のメッセージが少しの間表示されてから、GRUB メニューが表示されます。
Intel(R) Boot Agent PXE Base Code (PXE-2.1 build 0.86) Copyright(C) 1997-2007, Intel Corporation CLIENT MAC ADDR 00 14 4F 29 04 12 GUID FF2000008 FFFF FFFF FFFF 7BDA264F1400 CLIENT IP: 10.6.68.29 MASK: 255.255.255.0 DHCP IP: 10.6.68.49 GATEWAY: 10.6.68.1
GRUB メニューに 2 つのメニューエントリが表示されます。自動インストールを開始するには、2 番目のエントリを選択します。
Oracle Solaris 11 11/11 Text Installer and command line Oracle Solaris 11 11/11 Automated Install
デフォルトの GRUB メニューエントリ「テキストインストーラおよびコマンド行」では、イメージはブートされますが、手入力なしの自動インストールは開始されません。自動インストールを開始するには、GRUB メニュー内の 2 番目のエントリ「自動インストール」を選択します。1 番目のメニューエントリを選択した場合は、クライアントがブートされると、「インストールを開始しないでブートしたあとにインストールを開始する」に示すように、メニューが表示されます。このメニューを使用して、システムを確認するかインストールします。
イメージが選択されると、次のメッセージが表示されます。
Remounting root read/write snv_175 64-bit Probing for device nodes ...acle and/or its affiliates. All rights reserved. Preparing network image for use Downloading solaris.zlib --2011-08-26 07:35:13-- http://10.80.238.5:5555//install/images/i386_snv175/solaris.zlib Connecting to 10.80.238.5:5555... connected. HTTP request sent, awaiting response... 200 OK Length: 130032128 (124M) [text/plain] Saving to: `/tmp/solaris.zlib' 100%[======================================>] 130,032,128 16.4M/s in 8.3s 2011-08-26 07:35:22 (14.9 MB/s) - `/tmp/solaris.zlib' saved [130032128/130032128] Downloading solarismisc.zlib --2011-08-26 07:35:22-- http://10.80.238.5:5555//install/images/i386_snv175/solarismisc.zlib Connecting to 10.80.238.5:5555... connected. HTTP request sent, awaiting response... 200 OK Length: 18758144 (18M) [text/plain] Saving to: `/tmp/solarismisc.zlib' 100%[======================================>] 18,758,144 21.7M/s in 0.8s 2011-08-26 07:35:23 (21.7 MB/s) - `/tmp/solarismisc.zlib' saved [18758144/18758144] Downloading .image_info --2011-08-26 07:35:23-- http://10.80.238.5:5555//install/images/i386_snv175/.image_info Connecting to 10.80.238.5:5555... connected. HTTP request sent, awaiting response... 200 OK Length: 241 [text/plain] Saving to: `/tmp/.image_info' 100%[======================================>] 241 --.-K/s in 0s 2011-08-26 07:35:23 (29.3 MB/s) - `/tmp/.image_info' saved [241/241] Done mounting image Configuring devices. Hostname: solaris Service discovery phase initiated Service name to look up: default-i386 Service discovery finished successfully Process of obtaining install manifest initiated Using the install manifest obtained via service discovery Automated Installation started The progress of the Automated Installation will be output to the console Detailed logging is in the logfile at /system/volatile/install_log Press RETURN to get a login prompt at any time. solaris console login: 07:35:35 Install Log: /system/volatile/install_log 07:35:35 Using XML Manifest: /system/volatile/ai.xml 07:35:35 Using profile specification: /system/volatile/profile 07:35:35 Using service list file: /var/run/service_list 07:35:36 Starting installation. 07:35:36 0% Preparing for Installation 07:35:36 100% manifest-parser completed. 07:35:36 0% Preparing for Installation 07:35:36 1% Preparing for Installation 07:35:36 2% Preparing for Installation 07:35:36 3% Preparing for Installation 07:35:37 4% Preparing for Installation 07:35:51 7% target-discovery completed. 07:35:51 === Executing Target Selection Checkpoint == 07:35:51 Selected Disk(s) : c7t0d0 07:35:51 13% target-selection completed. 07:35:51 17% ai-configuration completed. 07:36:23 19% target-instantiation completed. 07:36:23 19% Beginning IPS transfer 07:36:23 Creating IPS image 07:36:41 Installing packages from: 07:36:41 solaris 07:36:41 origin: http://pkg.example.com/solaris/ 07:53:29 21% generated-transfer-1006-1 completed. 07:53:29 23% initialize-smf completed. 07:53:30 Setting console boot device property to ttya 07:53:30 Disabling graphical console in boot loader 07:53:30 Creating Legacy GRUB config directory: /rpool/boot/grub 07:53:30 Installing boot loader to devices: ['/dev/rdsk/c7t0d0s0'] 07:53:31 33% boot-configuration completed. 07:53:31 35% update-dump-adm completed. 07:53:31 37% setup-swap completed. 07:53:31 40% set-flush-ips-content-cache completed. 07:53:32 42% device-config completed. 07:53:46 44% apply-sysconfig completed. 07:53:46 46% transfer-zpool-cache completed. 07:54:08 87% boot-archive completed. 07:54:08 89% transfer-ai-files completed. 07:54:09 99% create-snapshot completed. 07:54:09 Automated Installation succeeded. 07:54:09 You may wish to reboot the system at this time. Automated Installation finished successfully The system can be rebooted now Please refer to the /system/volatile/install_log file for details After reboot it will be located at /var/sadm/system/logs/install_log
次のメッセージは、SPARC と x86 の両方のインストールに共通しています。
クライアントがブートに成功し、インストールファイルをダウンロードできる場合は、次のメッセージが表示されます。
Automated Installation started The progress of the Automated Installation will be output to the console Detailed logging is in the logfile at /system/volatile/install_log Press RETURN to get a login prompt at any time.
パスワード solaris を使用して root としてログインし、/system/volatile/install_log 内のインストールメッセージを監視できます。IPS からのパッケージのインストールが開始されると、このログファイルへの更新が長時間表示されないことがあります。
次のメッセージが表示された場合は、インストールが成功しました。
Automated Installation finished successfully The system can be rebooted now Please refer to the /system/volatile/install_log file for details After reboot it will be located at /var/sadm/system/logs/install_log
AI マニフェストで自動リブートを設定している場合は、この時点でシステムがリブートします。インストールが正常に完了したあとの自動リブートを指定するには、<ai_instance> タグの auto_reboot 属性を true に設定します。デフォルト値は false です。インストールが正常に完了したあと、クライアントは自動的にはリブートしません。