Set the SL150 Volume Label Format

▼	Set the SL150 Volume Label Format

Note – This procedure applies only to the SL150 library.

Use this procedure to set the volume label format properly on an SL150 library. This ensures that volume serial numbers (VSNs) are formatted correctly in SNMP data sent to the STA server so that STA can correctly process library exchange data. See “Volume Label Formatting” for details.

Caution – If the volume label format is not set properly, VSNs will be formatted incorrectly for STA. This will cause 1) exchanges processing to be blocked, 2) superfluous attempts by STA to get the latest media data from the library, and 3) irreversible, eight-character VSN records to appear on the Media - Overview screen whenever the “Show Removed Media” preference is set.

1.	Select Settings from the navigation bar on the left side of the interface.

2.	Select the Library tab.

Volume Label Format should be set to “Trim last two characters”. If it is not, proceed to the next step.

3.	Select the Edit button.

4.	Set Volume Label Format to “Trim last two characters”.

5.	Click Save.

▼

Set the SL150 Volume Label Format