The Fibre Channel (FC) port provider can use the same HBAs that are used for the FC initiators. A given FC port can be used as an initiator or as a target, but not as both. You can also configure a dual port or quad port FC HBA so that a subset of the HBA ports is in target mode and the rest of the ports are in initiator mode.
The procedures in this section are specific to QLogic HBAs. The driver to use with HBAs in initiator mode is qlc, which is a QLogic driver. The qlc driver works only in initiator mode, and cannot be used for target mode. The COMSTAR driver for a target QLogic 4G HBA is qlt.
Because initiator mode and target mode use different drivers, the driver you attach to an HBA port defines its function as a target or initiator. You can specify a driver for all the ports by specifying the PCI device ID of the HBA. Or, you can configure the driver on a port-by-port basis. Both methods use the update_drv command and are described in this section. For more information, see update_drv(1M).
Before making changes to the HBA ports, first check the existing port bindings.
For more information, see Using Your Assigned Administrative Rights in Securing Users and Processes in Oracle Solaris 11.3.
In this example, the current binding is pciex1077,2432.
# mdb -k Loading modules: [ unix krtld genunix specfs ... > ::devbindings -q qlc 30001617a08 pciex1077,2432, instance #0 (driver name: qlc) 300016177e0 pciex1077,2432, instance #1 (driver name: qlc) > $q
This procedure changes all ports on all HBAs with a specific PCI device ID to target mode. The PCI device ID number binds a driver to a port, thereby setting all the HBA ports with that PCI device ID, for example, all QLogic 4G PCI express HBAs, to target mode.
For more information, see Using Your Assigned Administrative Rights in Securing Users and Processes in Oracle Solaris 11.3.
In this example, the qlc driver is actively bound to pciex1077,2432. You must remove the existing binding for qlc before you can add that binding to a new driver. Single quotation marks are required in this syntax.
# update_drv -d -i 'pciex1077,2432' qlc Cannot unload module: qlc Will be unloaded upon reboot.
This message does not indicate an error. The configuration files have been updated but the qlc driver remains bound to the port until the system is rebooted.
In this example, qlt is updated. Single quotes are required in this syntax.
# update_drv -a -i 'pciex1077,2432' qlt devfsadm: driver failed to attach: qlt Warning: Driver (qlt) successfully added to system but failed to attach
This message does not indicate an error. The qlc driver remains bound to the port, until the system is rebooted. The qlt driver attaches when the system is rebooted.
# init 6 . . . # mdb -k Loading modules: [ unix krtld genunix specfs dtrace ... > ::devbindings -q qlt 30001615a08 pciex1077,2432, instance #0 (driver name: qlt) 30001615e0 pciex1077,2432, instance #1 (driver name: qlt) > $q
# stmfadm list-target -v Target: wwn.210100E08BA54E60 Operational Status : Offline Provider Name : qlt(1) Alias : - Sessions : 0 Target: wwn.210100E08BA54E60 Operational Status : Offline Provider Name : qlt(0) Alias : - Sessions : 0
This procedure uses path-based bindings. It shows you how to use a specific device path to bind a port to a driver that is different from the driver to which it is currently bound.
For more information, see Using Your Assigned Administrative Rights in Securing Users and Processes in Oracle Solaris 11.3.
This example shows the device paths for a single HBA with two ports.
# luxadm -e port /devices/pci@780/QLGC,qlc@0,1/fp@0,0:devctl CONNECTED /devices/pci@780/QLGC,qlc@0/fp@0,0:devctl CONNECTED
Remove the initial /devices portion of the path, and include everything up to /fp@0.... The path with the /devices portion removed is the path to which the system binds the qlt driver.
Single quotation marks are required in this syntax.
# update_drv -a -i '/pci@780/QLGC,qlc@0,1' qlt devfsadm: driver failed to attach: qlt Warning: Driver (qlt) successfully added to system but failed to attach.
This message does not indicate an error. The qlc driver remains bound to the port until reboot. The qlt driver attaches during reboot.
You should see that the port changed from initiator mode (qlc) to target mode (qlt).
# init 6 . . . # mdb -k . . . > $q
# stmfadm list-target -v