Install the SP Card (FRU)
When servicing the components in this section, unplug the AC power cords and use ESD
protection.
Before You Begin
-
Position the SP card with the two motherboard connectors facing downward.
The green captive screw head faces upward.
-
Align the connectors on the bottom of the SP card with the connectors on the
motherboard.
Use the screw hole and card mounting bracket to assist with the alignment. When correctly
positioned, the mounting bracket cradles the edges of the card.
-
To engage the two connectors, gently push the card downward at the two green pressure points
on the edges of the card.
-
Connect the SP card cable to the connector on the SP Card.
-
To secure the card, tighten the green captive screw.
-
Prepare the server for operation.
See Prepare the Server for Operation.