Host Configuration Parameters

Language:

Table 41 Host Configuration Parameters (set Command) Available Starting with FW 2.02

Parameters	Syntax	Response
`snmp_nms_host`	pducli -> `set snmp_nms_host.x=yyyy` (`yyyy`= Host Name, Host `x` from 1-4)	`pducli-> set OK` (or an error message)
`snmp_nms_community_readonly`	pducli -> `set snmp_nms_community_readonly.``x``=``yyyy` (`yyyy`= ReadOnly-Community, Host x from 1-4)	`pducli-> set OK` (or an error message)
`snmp_nms_community_readwrite`	pducli -> `set snmp_nms_community_readwrite.``x``=``yyyy` (`yyyy`= ReadWrite-Community, Host `x` from 1-4)	`pducli-> set OK` (or an error message)
`snmp_nms_accessright`	pducli -> `set snmp_nms_accessright.``x`=`y` (0=readonly, 1=read/write, 2=both, Host `x` from 1-4)	`pducli-> set OK` (or an error message)
`snmp_nms_enable`	pducli-> `set snmp_nms_enable.``x``=On` (or Off, Host `x` from 1-4)	`pducli-> set OK` (or an error message)
`snmp_traptarget_host`	pducli-> `set snmp_traptarget_host.``x=yyyy` (`yyyy`Host-Name, TrapTarget `x` from 1 to 10.)	`pducli-> set OK` (or an error message)
`snmp_traptarget_version`	pducli-> `set snmp_traptarget_version.``x``=2`	`pducli-> set OK` (or an error message)
`snmp_traptarget_enable`	pducli-> `set snmp_traptarget_enable.``x``=On`	`pducli-> set OK` (or an error message)
`snmp_nms_traptargethost`	pducli-> `set snmp_nms_traptargethost.``x`=`yyyy` (`yyyy`= Host Name, TrapTarget x from 1-10)	`pducli-> set OK` (or an error message)
`snmp_nms_traptarget_community`	pducli-> `set snmp_nms_traptarget_community.``x``=``yyyy` (`yyyy`= SNMP Trap Community, TrapTarget x from 1-10)	`pducli-> set OK` (or an error message)
`snmp_nms_traptarget_version`	pducli -> `set snmp_nms_traptarget_version.``x``=``y` (1=SNMPv1, 2=SNMPv2, 3=SNMPv3, TrapTarget `x` from 1-10)	`pducli-> set OK` (or an error message)
`snmp_nms_traptarget_enable`	pducli -> `set snmp_nms_traptarget_enable.``x``=On` (or Off, TrapTarget `x` from 1-10)	`pducli-> set OK` (or an error message)
`syslogserver_host`	pducli -> `set syslogserver_host.``x``=``yyyy` (`yyyy`= SyslogServer-Host, SyslogServer `x` from 1-4)	`pducli-> set OK` (or an error message)
`syslogserver_enable`	pducli -> `set syslogserver_enable.``x``=On` (or Off, SyslogServer `x` from 1-4)	`pducli-> set OK` (or an error message)

X = represents the Host Number associated with either an IP address or Host Name.

yyyy = is the community name

For example:

pducli->set snmp_nms_host.4=User1
pducli->set OK
pducli->set snmp_nms_community_readonly.4=User1_Com_r
pducli->set OK
pducli->set snmp_nms_community_readwrite.4=User1_Com_w
pducli->set OK
pducli->

Table 42 Host Configuration Parameters (get Command) Available Starting with FW 2.02

Parameters	Syntax	Response
`snmp_nms_host`	`pducli ->``get snmp_nms_host.x`	`pducli-> -> snmp_nms_host.x= yyyy` (`yyyy`= Host Name, Host `x` from 1-4)
`snmp_nms_community_readonly`	`pducli ->``get snmp_nms_community_readonly.``x` (`x`= Host-Number 1-4)	`pducli -> snmp_nms_community_readonly`.`x`=`yyyy` (`yyyy`= ReadOnly-Community for Host `x`)
`snmp_nms_community_readwrite`	`pducli ->``get snmp_nms_community_readwrite.``x` (`x`= Host-Number 1-4)	`pducli -> snmp_nms_community_readwrite`.`x` =`yyyy` (`yyyy`= ReadWrite-Community for Host `x`)
`snmp_nms_accessright`	`pducli ->``get snmp_nms_accessright`.`x` `x`= Host-Number 1-4)	`pducli -> snmp_nms_accessright.x`=`y` (0=readonly, 1=read/write, 2=both, for Host x)
`snmp_nms_enable`	`pducli->` `get snmp_nms_enable.``x` (`x`= Host-Number 1-4)	pducli-> `snmp_nms_enable`.`x`=`On` (or `snmp_nms_enable`.`x`=`Off` `for` Host `x`)
`snmp_traptarget_host`	`pducli->` `get snmp_traptarget_host.``x` (`x`= TrapTarget-Number from 1-10)	`pducli-> snmp_traptarget_host`.`x`=`yyyy` (`yyyy`= Host Name for TrapTarget x)
`snmp_traptarget_community`	`pducli ->` `get snmp_nms_traptarget_community.``x` (`x`=TrapTarget-Number from 1-10)	`pducli-> snmp_nms_traptarget_community`.`x=yyyy` (yyyy= SNMP TrapCommunity for TrapTarget x)
`snmp_traptarget_version`	`pducli ->` `get snmp_nms_traptarget_version.``x` (`x`= TrapTarget from 1-10)	`pducli -> snmp_nms_traptarget_version`.`x=y` (1=SNMPv1, 2=SNMPv2, 3=SNMPv3 for TrapTarget x)
`snmp_traptarget_enable`	`pducli ->``get snmp_nms_traptarget_enable.``x` (`x`= TrapTarget from 1-10)	`pducli -> snmp_nms_traptarget_enable`.`x=On` (or `snmp_nms_traptarget_enable`.`x=Off` for TrapTarget `x`)
`syslogserver_host`	`pducli ->``get syslogserver_host.``x` (`x`= SyslogServer-Number from 1-4)	`pducli -> syslogserver_host`.`x=yyyy` (`yyyy`= SyslogServer-Host for SyslogServer `x`)
`syslogserver_enable`	`pducli ->` `get syslogserver_enable.``x` (`x`= SyslogServer-Number from 1-4)	`pducli -> syslogserver_enable`.`x=On` (or `syslogserver_enable`.`x=Off` for SyslogServer `x`)