Before You Begin

This guide is your primary source of introduction, installation, post-installation, and configuration information for Oracle8i for Windows NT.

Specific topics discussed:

Prerequisites

This guide assumes that you are familiar with the following:

Windows NT, and have installed and tested it on your computer system
Object-relational database management concepts

Intended Audience

This guide is necessary for anyone installing or configuring the Oracle8i Enterprise Edition and Oracle8i database types. Note that the term Oracle8i for Windows NT is used in this guide to describe both types.

This guide describes only the features of Oracle8i for Windows NT software that apply to the Windows NT, Windows 95, and Windows 98 operating systems. For information about Oracle8i for Windows NT that is applicable to all operating systems, see the other documentation included in your package, listed in "Online Documentation Set".

How This Guide Is Organized

This guide is organized as follows:

Documentation and Code Conventions

The following conventions are used in this guide:

Convention Example Meaning

All uppercase plain

C:\ORACLE\ORA81

Indicates command names, SQL reserved words, and keywords, as in ALTER DATABASE. All uppercase plain is also used for directory names and file names.

Italic

Used to indicate a variable:

file name

Used to indicate the title of a guide.

Indicates a value that you must provide. For example, if a command asks you to type file name, you must type the actual name of the file.

Square brackets [ ]

X:\[PATHNAME]\ORACLE\
HOME_NAME

Encloses optional items. For example, when you create an OFA-compliant Oracle home directory, you can place an optional pathname before the \ORACLE pathname.
Square brackets also indicate a function key, for example [Enter].

Choose Start >

Choose Start > Programs > Oracle - HOME_NAME > Network Administration > Net8 Assistant

How to start a program. For example, to start Net8 Assistant, you must click the Start button on the taskbar and then choose Programs, Oracle - HOME_NAME > Network Administration > Net8 Assistant.

C:\>

C:\ORACLE\ORADATA>

Represents the Windows NT command prompt of the current hard disk drive. Your prompt reflects the subdirectory in which you are working. Referred to as the MS-DOS command prompt in this guide.

Backslash (\) before a directory name

\ORADATA

Indicates that the directory is a subdirectory of the root directory.

ORACLE_HOME and ORACLE_BASE

Go to the ORACLE_BASE\ORACLE_HOME\RDBMS\ADMIN directory

In releases prior to 8.1, when you installed Oracle8i Enterprise Edition or Oracle8i for Windows NT, all subdirectories were located under a top level Oracle home directory, that by default was:
C:\ORANT for Windows NT
C:\ORAWIN95 for Windows 95
C:\ORAWIN95 for Windows 98
or whatever you may have called your Oracle home.
In this Optimal Flexible Architecture (OFA)-compliant release, all subdirectories are no longer under a top level ORACLE_HOME directory. There is now a new top-level directory called ORACLE_BASE that by default is C:\ORACLE. If you install Oracle8i Enterprise Edition or Oracle8i for Windows NT release 8.1.6 on a clean computer (that is, there is no other Oracle software on the computer), the default settings for the first Oracle home directory is C:\ORACLE\ORA81. If you run Oracle Universal Installer again and install release 8.2.x, the second Oracle home directory is called \ORA82. These Oracle home directories are located directly under ORACLE_BASE. All directory path examples in this guide follow OFA conventions.
See the Oracle8i Administrator's Guide for Windows NT for additional information on OFA compliance and for information on installing Oracle products in non-OFA compliant directories.

%ORACLE_HOME%

SQL> @%ORACLE_HOME%\ADMIN\DB_NAME\ADHOC\CATALOG.SQL

In SQL*Plus commands, you may see %ORACLE_HOME%. SQL*Plus is able to locate your Oracle home directory using the %ORACLE_HOME% variable. This convention can be used in Server Manager, SQL*Plus, Export Utility, and Import Utility.

HOME_NAME

OracleHOME_NAMETNSListener

Represents the Oracle home name.
The home name can be up to sixteen alphanumeric characters. The only special character allowed in the home name is the underscore.

HOMEID

HOME0, HOME1, HOME2

Represents a unique registry subkey for each Oracle home directory in which you install products. A new HOMEID is created and incremented each time you install products to a different Oracle home directory on one computer. Each HOMEID contains its own configuration parameter settings for installed Oracle products.

Symbols

period .
comma ,
hyphen -
semicolon ;
colon :
equal sign =
backslash \
single quote '
double quote "
parentheses ()

Symbols other than brackets and vertical bars must be entered in commands exactly as shown.

Before You Begin

Prerequisites

Intended Audience

How This Guide Is Organized

Chapter 1, "Introducing Oracle8i for Windows NT"

Chapter 2, "Installation Overview"

Chapter 3, "Installation Requirements"

Chapter 4, "Selecting Database Creation and Net8 Configuration Methods"

Chapter 5, "Installing Oracle Components"

Chapter 6, "Reviewing Your Installed Starter Database Contents"

Chapter 7, "Post-installation Configuration Tasks"

Chapter 8, "Deinstalling Oracle Components and Services"

Appendix A, "Individual Components Available for Installation"

Appendix B, "Individual Component Descriptions"

Appendix C, "National Language Support"

Appendix D, "Installing and Removing Legato Components"

Appendix E, "Getting Started with Your Documentation"

Documentation and Code Conventions

Convention	Example	Meaning
All uppercase plain	`C:\ORACLE\ORA81`	Indicates command names, SQL reserved words, and keywords, as in ALTER DATABASE. All uppercase plain is also used for directory names and file names.
Italic	Used to indicate a variable: file name Used to indicate the title of a guide.	Indicates a value that you must provide. For example, if a command asks you to type file name, you must type the actual name of the file.
Square brackets [ ]	X:\[PATHNAME]\ORACLE\ HOME_NAME	Encloses optional items. For example, when you create an OFA-compliant Oracle home directory, you can place an optional pathname before the \ORACLE pathname. Square brackets also indicate a function key, for example [Enter].
Choose Start >	Choose Start > Programs > Oracle - HOME_NAME > Network Administration > Net8 Assistant	How to start a program. For example, to start Net8 Assistant, you must click the Start button on the taskbar and then choose Programs, Oracle - HOME_NAME `> Network Administration > Net8` Assistant`.`
C:\>	`C:\ORACLE\ORADATA>`	Represents the Windows NT command prompt of the current hard disk drive. Your prompt reflects the subdirectory in which you are working. Referred to as the MS-DOS command prompt in this guide.
Backslash (\) before a directory name	`\ORADATA`	Indicates that the directory is a subdirectory of the root directory.
ORACLE_HOME and ORACLE_BASE	Go to the ORACLE_BASE\ORACLE_HOME\RDBMS\ADMIN directory	In releases prior to 8.1, when you installed Oracle8i Enterprise Edition or Oracle8i for Windows NT, all subdirectories were located under a top level Oracle home directory, that by default was: C:\ORANT for Windows NT C:\ORAWIN95 for Windows 95 C:\ORAWIN95 for Windows 98 or whatever you may have called your Oracle home. In this Optimal Flexible Architecture (OFA)-compliant release, all subdirectories are no longer under a top level ORACLE_HOME directory. There is now a new top-level directory called ORACLE_BASE that by default is C:\ORACLE. If you install Oracle8i Enterprise Edition or Oracle8i for Windows NT release 8.1.6 on a clean computer (that is, there is no other Oracle software on the computer), the default settings for the first Oracle home directory is C:\ORACLE\ORA81. If you run Oracle Universal Installer again and install release 8.2.x, the second Oracle home directory is called \ORA82. These Oracle home directories are located directly under ORACLE_BASE. All directory path examples in this guide follow OFA conventions. See the Oracle8i Administrator's Guide for Windows NT for additional information on OFA compliance and for information on installing Oracle products in non-OFA compliant directories.
%ORACLE_HOME%	SQL> @%ORACLE_HOME%\ADMIN\DB_NAME\ADHOC\CATALOG.SQL	In SQLPlus commands, you may see %ORACLE_HOME%. SQLPlus is able to locate your Oracle home directory using the %ORACLE_HOME% variable. This convention can be used in Server Manager, SQL*Plus, Export Utility, and Import Utility.
HOME_NAME	OracleHOME_NAMETNSListener	Represents the Oracle home name. The home name can be up to sixteen alphanumeric characters. The only special character allowed in the home name is the underscore.
HOMEID	HOME0, HOME1, HOME2	Represents a unique registry subkey for each Oracle home directory in which you install products. A new HOMEID is created and incremented each time you install products to a different Oracle home directory on one computer. Each HOMEID contains its own configuration parameter settings for installed Oracle products.
Symbols	period . comma , hyphen - semicolon ; colon : equal sign = backslash \ single quote ' double quote " parentheses ()	Symbols other than brackets and vertical bars must be entered in commands exactly as shown.