A
Command Line Options

This appendix contains descriptions and examples of command line options that can be used with one or more of the following commands: rwclient, rwrun, rwbuilder, rwconverter, rwservlet, rwcgi, and rwserver. Each option description includes a table that indicates which commands can use which option keywords.

Note: For examples of using command line options in your runtime URL, see Running Report Requests.

The following topics are discussed in this appendix:

• Command Overview

• Command Line Syntax

• General Usage Notes

• Command Line Keywords

A.1 Command Overview

This section provides a brief description of the commands whose keywords/options are discussed in this appendix, including:

• rwclient

• rwrun

• rwbuilder

• rwconverter

• rwservlet

• rwcgi

• rwserver

Each command description includes a list of the keywords that can be used with it. In the command line, you must use the keyword along with its option. When you enter a command line, you can use the keywords in any order.

A.1.1 rwclient

The rwclient command parses and transfers a command line to the specified (or default) Reports Server. All file names and paths specified in rwclient refer to files and directories on the server machine, except for files specified in the CMDFILE keyword. In this case, the CMDFILE specified will be read and appended to the original command line (of which CMDFILE is a part) before being sent to the Reports Server. The runtime engine will not re-read the CMDFILE.

Keywords used with rwclient

The brackets surrounding each keyword in this list are there to create a separation between keywords and has no other significance.

rwclient [ACCESSIBLE] [ARRAYSIZE] [AUTHID] [AUTOCOMMIT] [BACKGROUND] [BCC] 
[BLANKPAGES] [BUFFERS] [CACHELOB] [CC] [CELLWRAPPER] [CMDFILE][COLLATE] [COPIES] 
[CUSTOMIZE] [DATEFORMATMASK] [DELIMITED_HDR] [DELIMITER] [DESFORMAT] [DESNAME] 
[DESTINATION] [DESTYPE] [DISTRIBUTE] [ENGINERESPONSETIMEOUT] [EXPIRATION] 
[EXPRESS_SERVER] [FROM] [JOBNAME] [JOBTYPE] [LONGCHUNK] [MODE] [MODULE|REPORT] 
[NONBLOCKSQL] [NOTIFYFAILURE][NOTIFYSUCCESS][NUMBERFORMATMASK] [OLAP_CON] 
[ONFAILURE] [ONSUCCESS] [ORIENTATION] [OUTPUTIMAGEFORMAT] [PAGESIZE] [PDFCOMP] 
[PDFEMBED] [READONLY] [RECURSIVE_LOAD] [REPLYTO] [REPORT|MODULE] [ROLE] 
[RUNDEBUG] [SCHEDULE] [SERVER][SQLTRACE][SUBJECT][SUPPRESSLAYOUT][TOLERANCE] 
[TRACEFILE] [TRACEMODE] [TRACEOPTS] [USERID]

Examples

Example 1:

Running a paper report to a browser (cache)

rwclient server=myrepserv report=test.rdf userid=scott/tiger@mydb DESFORMAT=pdf 
DESTYPE=cache

Example 2:

Sending a report output to a file

rwclient server=myrepserv report=test.rdf userid=scott/tiger@mydb desformat=pdf 
DESTYPE=file DESNAME=c:\mydir\test

Example 3:

Sending a report output to a printer

rwclient server=myrepserv report=test.rdf userid=scott/tiger@mydb desformat=pdf 
DESTYPE=printer DESNAME=myprinter

Example 4:

Sending a report output via e-mail

rwclient server=myrepserv report=test.rdf userid=scott/tiger@mydb desformat=pdf 
DESTYPE=mail DESNAME="[e-mail], [e-mail]" cc="[e-mail]" 
bcc="[e-mail]" replyto="[e-mail]" from="[e-mail]"

Example 5:

Sending a report output to WebDAV (any WebDAV server or OracleAS Portal WebDAV)

rwclient server=myrepserv report=test.rdf userid=scott/tiger@mydb 
desformat=htmlcss DESTYPE=webdav 
DESNAME="http://myusername:[e-mail]/mydir/test.html"

Example 6:

Sending a report output to OracleAS Portal

rwclient server=myrepserv report=test.rdf userid=scott/tiger@mydb 
DESTYPE=oracleportal desformat=PDF PAGEGROUP=mypagegrp OUTPUTPAGE=reports_output 
ITEMTITLE=pushtoportal STATUSPAGE=result

Example 7:

Sending an XML PDS report output to a file

rwclient server=myrepserv report=myxmlpdstest.rdf destype=file desformat=PDF 
desname=c:\mydir\my.pdf

Example 8:

Sending a JDBC PDS report output to a file

rwclient server=myrepserv report=myjdbcpdstest.rdf destype=file desformat=PDF 
desname=c:\mydir\myxml.pdf p_jdbcpds=sybuser/[e-mail]:1300

Example 9:

Distributing a report output to multiple destinations:

rwclient server=myrepserv report=test.rdf userid=scott/tiger@mydb DISTRIBUTE=yes 
DESTINATION=c:\mydistribute.xml

Example 10:

Running scheduled reports

rwclient server=myrepserver report=test.rdf SCHEDULE="every first fri of month 
from 15:53 Oct 23, 1999 retry 3 after 1 hour" destype=file desformat=pdf 
desname=test.pdf

Example 11:

Using a secured Reports Server

rwclient server=myrepserv report=test.rdf userid=scott/tiger@mydb desformat=pdf 
destype=file desname=test.pdf AUTHID=myadmin/myadmin

Example 12:

Running a report with e-mail notification

rwclient server=myrepserver report=test.rdf userid=scott/tiger@mydb destype=file 
desformat=pdf desname=test.pdf NOTIFYSUCCESS="[e-mail]" 
NOTIFYFAILURE="[e-mail]"

Example 13:

Running a report that specifies a URL to be fetched with the URL engine:

rwclient server=myrepserver report=test.rdf userid=scott/tiger@mydb destype=file 
desformat=pdf desname=test.pdf JOBTYPE=rwurl 
URLPARAMETER="http://www.oracle.com"

Example 14:

Running a report with the traceopts enabled

rwclient server=myrepserver report=test.rdf userid=scott/tiger@mydb destype=file 
desformat=pdf desname=test.pdf TRACEOPTS=trace_prf TRACEMODE=trace_replace

A.1.2 rwrun

The rwrun command runs a report using the OracleAS Reports Services in-process server. When you run a .rep file, the PL/SQL is already compiled and will not be recompiled. If you are running an .rdf file, the PL/SQL is automatically recompiled, if necessary. It becomes necessary if the report wasn't compiled and saved from Reports Builder or the platform or version on which you were running the report is incompatible with the platform on which it was last compiled and saved.

Keywords used with rwrun

The brackets surrounding each keyword in this list are there to create a separation between keywords and has no other significance.

rwrun [ACCESSIBLE] [ARRAYSIZE] [AUTHID] [AUTOCOMMIT] [BCC] [BLANKPAGES] 
[BUFFERS] [CACHELOB] [CC] [CELLWRAPPER] [CMDFILE] [COLLATE] [COPIES] [CUSTOMIZE] 
[DATEFORMATMASK] [DELIMITED_HDR] [DELIMITER] [DESFORMAT] [DESNAME] [DESTINATION] 
[DESTYPE] [DISTRIBUTE] [EXPRESS_SERVER] [FROM] [LONGCHUNK] [MODE] 
[MODULE|REPORT] [NONBLOCKSQL] [NOTIFYFAILURE][NOTIFYSUCCESS][OLAP_CON] 
[ONFAILURE] [ONSUCCESS] [ORIENTATION] [OUTPUTIMAGEFORMAT] [PAGESIZE] 
[PAGESTREAM] [PDFCOMP] [PDFEMBED] [PRINTJOB] [READONLY] [RECURSIVE_LOAD] 
[REPLYTO] [REPORT|MODULE] [ROLE] [RUNDEBUG] [SAVE_RDF] 
[SQLTRACE][SUBJECT][SUPPRESSLAYOUT][TRACEFILE] [TRACEMODE] [TRACEOPTS] [USERID]

Examples

Example 1:

Customizing a report

rwrun userid=scott/tiger@mydb report=emp.rdf  CUSTOMIZE=empcustomize.xml 
destype=file desformat=pdf desname=emp.pdf  

Example 2:

Running a paper report to a browser (cache)

rwrun report=test.rdf userid=scott/tiger@mydb desformat=pdf destype=cache 
Example 3: Sending report output to a file
rwrun report=test.rdf userid=scott/tiger@mydb desformat=pdf DESTYPE=file 
DESNAME=c:\mydir\test.pdf

Example 4:

Sending a report output to a printer

rwrun report=test.rdf userid=scott/tiger@mydb desformat=pdf DESTYPE=printer 
DESNAME=myprinter

Example 5:

Sending a report output via e-mail

rwrun report=test.rdf userid=scott/tiger@mydb desformat=pdf DESTYPE=mail 
DESNAME="[e-mail], [e-mail]"cc="[e-mail]"bcc="[e-mail]" 
replyto="[e-mail]" from="[e-mail]"

Example 6:

Sending a report output to WebDAV (any WebDAV server or OracleAS Portal WebDAV)

rwrun report=test.rdf userid=scott/tiger@mydb desformat=htmlcss DESTYPE=webdav 
DESNAME="http://myusername:[e-mail]/mydir/test.html" 

Example 7:

Sending a report output to OracleAS Portal

rwrun report=test.rdf userid=scott/tiger@mydb DESTYPE=oracleportal desformat=PDF 
PAGEGROUP=mypagegrp OUTPUTPAGE=reports_output ITEMTITLE=pushtoportal 
STATUSPAGE=result 

Example 8:

Sending an XML PDS report output to a file

rwrun report=myxmlpdstest.rdf destype=file desformat=PDF desname=c:\mydir\my.pdf 

Example 9:

Sending a JDBC PDS report output to a file

rwrun report=myjdbcpdstest.rdf destype=file desformat=PDF 
desname=c:\mydir\myxml.pdf p_jdbcpds=sybuser/[e-mail]:1300 

Example 10:

Distributing a report output to multiple destinations

rwrun report=test.rdf userid=scott/tiger@mydb DISTRIBUTE=yes 
DESTINATION=c:\mydistribute.xml 

Example 11:

Using a secured Reports Server

rwrun report=test.rdf userid=scott/tiger@mydb desformat=pdf destype=file 
desname=test.pdf AUTHID=myadmin/myadmin

Example 12:

Running a report with e-mail notification

rwrun report=test.rdf userid=scott/tiger@mydb destype=file desformat=pdf 
desname=test.pdf NOTIFYSUCCESS="[e-mail]" NOTIFYFAILURE="[e-mail]" 

Example 13:

Running a report with the traceopts enabled

rwrun report=test.rdf userid=scott/tiger@mydb destype=file desformat=pdf 
desname=test.pdf TRACEOPTS=trace_prf TRACEMODE=trace_replace

A.1.3 rwbuilder

The rwbuilder command invokes Reports Builder. When you include a REPORT|MODULE keyword with the rwbuilder command at the command prompt, then press Enter, Reports Builder opens with the specified report highlighted in the Object Navigator. When no report is specified, Reports Builder opens with a Welcome dialog offering you the choice of opening an existing report or creating a new one.

Keywords used with rwbuilder

The brackets surrounding each keyword in this list are there to create a separation between keywords and has no other significance.

rwbuilder [ACCESSIBLE] [ARRAYSIZE] [AUTOCOMMIT] [BLANKPAGES] [BUFFERS] 
[CACHELOB] [CMDFILE] [EXPRESS_SERVER] [LONGCHUNK] [MODULE|REPORT] [NONBLOCKSQL] 
[OLAP_CON] [ONFAILURE] [ONSUCCESS] [OUTPUTIMAGEFORMAT] [PAGESIZE] [PRINTJOB] 
[READONLY] [REPORT|MODULE] [RUNDEBUG] [SAVE_RDF][SQLTRACE] [SUPPRESSLAYOUT] 
[TRACEFILE] [TRACEMODE] [TRACEOPTS] [USERID] [WEBSERVER_DEBUG] [WEBSERVER_
DOCROOT] [WEBSERVER_PORT]

Example: rwbuilder report=myrep.rdf userid=scott/tiger@mydb

A.1.4 rwconverter

The rwconverter command enables you to convert one or more report definitions or PL/SQL libraries from one storage format to another. For example, you can use rwconverter to:

• Combine a report file with an XML file to create a new report

• Convert a report stored in an .rdf file to a .rep, .rex, .jsp, or .tdf (template) file.

  Note: When a report is converted to a template, only objects in the report's header and trailer sections and margin area are used in the template. Objects in the main section are ignored.

• Convert a report stored in a .rex file to an .rdf or a template (.tdf file)

• Convert a library stored in the database to a .pld or .pll file

• Convert a library stored in a .pld file into a database library or a .pll file

• Convert a library stored in a .pll file into a database library of a .pld file

  Note: When you convert a report that has an attached library, convert the .pll files attached to the report before converting the .rdf/.rex file.

• Batch create a PL/SQL script that batch registers reports in OracleAS Portal

In some cases, rwconverter will automatically compile the report's PL/SQL as part of the conversion process. Provided your conversion destination is not a .rex file, rwconverter automatically compiles PL/SQL under the following conditions:

• Converting to a .rep file. If there are compile errors, rwconverter displays an error message and the .rep file is not created.

• Using a .rex file as the source

• Using a report created on another platform as the source

In all other situations, you must compile the report's PL/SQL yourself (e.g., using Program >> Compile >> All in Reports Builder).

Note: Fonts are mapped when a report is opened by Reports Builder or Reports Runtime, not during the conversion.

Keywords used with rwconverter

The brackets surrounding each keyword in this list are there to create a separation between keywords and has no other significance.

rwconverter [BATCH] [CMDFILE] [CUSTOMIZE] [DEST] [DTYPE] [DUNIT] [FORMSIZE] 
[NOTIFYFAILURE] [OVERWRITE] [PAGESIZE] [SOURCE] [STYPE] [USERID] [P_OWNER] [P_
SERVERS] [P_NAME] [P_DESCRIPTION] [P_PRIVILEGE] [P_AVAILABILITY] [P_TYPES] [P_
FORMATS] [P_PRINTERS] [P_PFORMTEMPLATE] [P_TRIGGER] [RECURSIVE_LOAD][UPGRADE_
PLSQL]

Example: rwconverter scott/tiger@mydb stype=rdffile source=inven1.rdf 
dtype=xmlfile dest=inven1_new.xml 

A.1.5 rwservlet

rwservlet translates and delivers information between either a Web server or a J2EE Container (for example, OC4J) and the Reports Server, enabling you to run a report dynamically from your Web browser. Optionally, it can use the In-Process Server, which reduces the maintenance and administration of the Reports Server by providing a means for starting the server automatically, whenever it receives the first request from the client.

Note: When you use the rwservlet command to run a JSP, you can use all keywords applicable to rwservlet. For more information on running a JSP with rwservlet, see Running Report Requests.

Keywords used with rwservlet

The brackets surrounding each keyword in this list are there to create a separation between keywords and has no other significance.

rwservlet [ACCESSIBLE] [ARRAYSIZE] [AUTHID] [AUTOCOMMIT] [BACKGROUND][BCC] 
[BLANKPAGES] [BUFFERS] [CACHELOB] [CC] [CELLWRAPPER] [CMDKEY] [CONTENTAREA*] 
[COLLATE] [COPIES] [CUSTOMIZE] [DATEFORMATMASK] [DELAUTH] [DELIMITED_HDR] 
[DELIMITER] [DESFORMAT] [DESNAME] [DESTINATION] [DESTYPE] [DISTRIBUTE] 
[ENGINERESPONSETIMEOUT] [EXPIRATION] [EXPIREDAYS] [EXPRESS_SERVER] [FROM] 
[GETJOBID] [GETSERVERINFO] [HELP] [ITEMTITLE] [JOBNAME] [JOBTYPE] [KILLJOBID] 
[LONGCHUNK] [MIMETYPE] [MODE] [MODULE|REPORT] [NONBLOCKSQL] [NOTIFYFAILURE] 
[NOTIFYSUCCESS] [OLAP_CON] [ONFAILURE] [ONSUCCESS] [ORIENTATION] [OUTPUTFOLDER*] 
[OUTPUTIMAGEFORMAT] [OUTPUTPAGE] [PAGEGROUP] [PAGESIZE] [PAGESTREAM] [PARAMFORM] 
[PARSEQUERY] [PDFCOMP] [PDFEMBED] [READONLY] [RECURSIVE_LOAD] [REPLACEITEM] 
[REPLYTO] [REPORT|MODULE] [ROLE] [RUNDEBUG] [SCHEDULE] [SERVER] [SHOWAUTH] 
[SHOWENV] [SHOWMAP][SHOWJOBID] [SHOWJOBS] [SHOWMYJOBS] 
[SITENAME*][SQLTRACE][STATUSFORMAT] [STATUSFOLDER*] [STATUSPAGE] [SSOCONN] 
[SUBJECT][SUPPRESSLAYOUT][TOLERANCE] [TRACEMODE] [TRACEOPTS] [URLPARAMETER] 
[USERID]

* maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

Note: The following keywords are commands rather than keyword-value pairs, i.e., commands are entered by themselves without a corresponding value: SHOWENV, SHOWJOBS, SHOWMAP, SHOWMYJOBS, KILLJOBID, PARSEQUERY, DELAUTH, GETJOBID, and GETSERVERINFO.

Examples

http://myiasFoot 1.mycomp.com:7779Foot 2/reports/rwservlet?server=myrepserver+report=myrep
o.rdf+desname=sample.pdf+desformat=pdf+destype=file

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserver+authidFoot 3=myrepu
ser/myreppassword+report=myrepo.rdf+desname=sample.pdf+desformat=pdf+destype=fil
e

Example 1:

Running a paper report to a browser (cache)

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+
userid=scott/tiger@mydb+desformat=pdf+DESTYPE=cache

Example 2:

Sending a report output to a file

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+
userid=scott/tiger@mydb+desformat=pdf+DESTYPE=file+DESNAME=c:\mydir\test.

Example 3:

Sending a report output to a printer

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+
userid=scott/tiger@mydb+desformat=pdf+DESTYPE=printer+DESNAME=myprinter

Example 4:

Sending a report output via e-mail

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+
userid=scott/tiger@mydb+desformat=pdf+DESTYPE=mail+DESNAME="[e-mail],emp2@c
omp.com"+CC="[e-mail]"+BCC="[e-mail]"+REPLYTO="[e-mail]"+FROM=me@com
p.com"

Example 5:

Sending a report output to WebDAV (any WebDAV server or OracleAS Portal WebDAV)

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+
userid=scott/tiger@mydb+desformat=htmlcss+DESTYPE=webdav+DESNAME="http://myusern
ame:[e-mail]/mydir/test.html"

Example 6:

Sending a report output to OracleAS Portal

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+
userid=scott/tiger@mydb+destype=oracleportal+desformat=PDF+PAGEGROUP=mypagegrp+O
UTPUTPAGE=reports_output+ITEMTITLE=pushtoportal+STATUSPAGE=result

Example 7:

Sending an XML PDS report output to a file

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=myxmlpdst
est.rdf+destype=file+desformat=PDF+DESNAME=c:\mydir\my.pdf

Example 8:

Sending a JDBC PDS report output to a file

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=myjdbcpds
test.rdf+destype=file+desformat=PDF+desname=c:\mydir\myxml.pdf+p_
jdbcpds=sybuser/[e-mail]:1300

Example 9:

Distributing a report output to multiple destinations

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+
userid=scott/tiger@mydb+DISTRIBUTE=yes+DESTINATION=c:\mydistribute.xml

Example 10:

Running scheduled reports

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserver+report=test.rd
f+SCHEDULE="every first fri of month from 15:53 Oct 23, 1999 retry 3 after 1 
hour"+destype=file+desformat=pdf+desname=test.pdf

Example 11:

Using a secured Reports Server

http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+
userid=scott/tiger@mydb+desformat=pdf+destype=file+desname=test.pdf+AUTHID=myadm
in/myadmin

Example 12:

Using a key file

http://myias.mycomp.com:7779/report/rwservlet?key1

where

key1=key defined in the cgicmd.dat file (the keyname should be the first parameter)

or

http://myias.mycomp.com:7779/report/rwservlet?server=myrepserv+userparam=12+CMDK
EY*=keyname

*when used with cmdkey, it can be anywhere in the URL

Example 13:

Running a report with a Parameter Form

http://myias.mycomp.com:7779/rwservlet?server=myrepserver+report=test.rdf+userid
=scott/tiger@mydb+destype=cache+desformat=htmlcss+PARAMFORM=yes

Example 14:

Running a report with e-mail notification

http://myias.mycomp.com:7779/rwservlet?server=myrepserver+report=test.rdf+userid
=scott/tiger@mydb+destype=file+desformat=pdf+desname=test.pdf+NOTIFYSUCCESS="emp
@comp.com"+NOTIFYFAILURE="admin@comp"

Example 15:

Running a report that specifies a URL to be fetched with the URL engine

http://myias.mycomp.com:7779/rwservlet?server=myrepserver+report=test.rdf+userid
=scott/tiger@mydb+destype=file+desformat=pdf+desname=test.pdf+JOBTYPE=rwurl+URLP
ARAMETER="http://www.oracle.com"

Example 16:

Running a report with the traceopts enabled

http://myias.mycomp.com:7779/rwservlet?server=myrepserver+report=test.rdf+userid
=scott/tiger@mydb+destype=file+desformat=pdf+desname=test.pdf+TRACEOPTS=trace_
prf+TRACEMODE=trace_replace

A.1.6 rwcgi

Like rwservlet, rwcgi (the Common Gateway Interface (CGI) translates and delivers information between either a Web server or a J2EE Container (for example, OC4J) and the Reports Server, enabling you to run a report dynamically from your Web browser.

Note: With Oracle Reports 10g, rwcgi is deprecated (maintained only for backward compatibility); instead, use JSPs or servlets (rwservlet).

Keywords used with rwcgi

The brackets surrounding each keyword in this list are there to create a separation between keywords and has no other significance.

rwcgi [ACCESSIBLE] [ARRAYSIZE] [AUTHID] [AUTOCOMMIT] [BACKGROUND][BCC] 
[BLANKPAGES] [BUFFERS] [CACHELOB] [CC] [CELLWRAPPER] [COLLATE] [CONTENTAREA*] 
[COPIES] [CUSTOMIZE] [DATEFORMATMASK] [DELAUTH][DELIMITED_HDR] [DELIMITER] 
[DESFORMAT] [DESNAME] [DESTINATION] [DESTYPE] [DISTRIBUTE] 
[ENGINERESPONSETIMEOUT] [EXPIRATION] [EXPIREDAYS] [EXPRESS_SERVER] 
[FROM][GETJOBID][ITEMTITLE] [JOBNAME] [JOBTYPE][KILLJOBID][LONGCHUNK] [MIMETYPE] 
[MODE] [MODULE|REPORT] [NONBLOCKSQL] [NOTIFYFAILURE] [NOTIFYSUCCESS] [OLAP_CON] 
[ONFAILURE] [ONSUCCESS] [ORIENTATION] [OUTPUTFOLDER*] [OUTPUTIMAGEFORMAT] 
[OUTPUTPAGE] [PAGEGROUP] [PAGESIZE] [PAGESTREAM] 
[PARAMFORM][PARSEQUERY][PDFCOMP][PDFEMBED] [READONLY] [RECURSIVE_LOAD] 
[REPLACEITEM] [REPLYTO] [REPORT|MODULE] [ROLE][RUNDEBUG][SCHEDULE][SERVER] 
[SHOWENV][SHOWMAP][SHOWJOBID][SHOWJOBS] [SHOWMYJOBS] [SHOWAUTH] [SITENAME*] 
[SQLTRACE] [STATUSFOLDER*] [STATUSPAGE] [SUBJECT][SUPPRESSLAYOUT][TOLERANCE] 
[TRACEMODE] [TRACEOPTS] [USERID]

* maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

Examples

http://mywebserver.comFoot 4:7779Foot 5/cgi-bin/rwcgi.exeFoot 6?server=myrepserver+report=myrepo
.rdf+desname=sample.pdf+desformat=pdf+destype=file

http://mywebserver.com:7779/cgi-bin/rwcgi.shFoot 7?server=myrepserver+authidFoot 8=myrepus
er/myreppassword+report=myrepo.rdf+desname=sample.pdf+desformat=pdf+destype=file

Example 1:

Running a paper report to a browser (cache)

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=test.rdf+u
serid=scott/tiger@mydb+DESFORMAT=pdf+DESTYPE=cache

Example 2:

Sending a report output to a file

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=test.rdf+u
serid=scott/tiger@mydb+desformat=pdf+DESTYPE=file+DESNAME=c:\mydir\test

Example 3:

Sending a report output to a printer

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=test.rdf+u
serid=scott/tiger@mydb+desformat=pdf+DESTYPE=printer+DESNAME=myprinter

Example 4:

Sending a report output via e-mail

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=test.rdf+u
serid=scott/tiger@mydb+desformat=pdf+DESTYPE=mail+DESNAME="[e-mail], 
[e-mail]+CC=[e-mail]"+BCC="[e-mail]"+REPLYTO="[e-mail]+from=me@
comp.com"

Example 5:

Sending report output to WebDAV (any WebDAV server or OracleAS Portal WebDAV)

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=test.rdf+u
serid=scott/tiger@mydb+desformat=htmlcss+DESTYPE=webdav+DESNAME="http://myuserna
me:[e-mail]/mydir/test.html"

Example 6:

Sending a report output to OracleAS Portal

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=test.rdf+u
serid=scott/tiger@mydb+DESTYPE=oracleportal+desformat=PDF+PAGEGROUP=mypagegrp+OU
TPUTPAGE=reports_output+ITEMTITLE=pushtoportal+STATUSPAGE=result

Example 7:

Sending XML PDS report output to a file

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=myxmlpdste
st.rdf+DESTYPE=file+desformat=PDF+desname=c:\mydir\my.pdf

Example 8:

Sending a JDBC PDS report output to a file

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=myjdbcpdst
est.rdf+destype=file+desformat=PDF+desname=c:\mydir\myxml.pdf+p_
jdbcpds=sybuser/[e-mail]:1300

Example 9:

Distributing report output to multiple destinations

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=test.rdf+u
serid=scott/tiger@mydb+DISTRIBUTE=yes+DESTINATION=c:\mydistribute.xml

Example 10:

Running scheduled reports

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserver+report=test.rdf
+SCHEDULE="every first fri of month from 15:53 Oct 23, 1999 retry 3 after 1 
hour"+destype=file+desformat=pdf+desname=test.pdf

Example 11:

Using a secured Reports Server

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+report=test.rdf+u
serid=scott/tiger@mydb+desformat=pdf+destype=file+desname=test.pdf+AUTHID=myadmi
n/myadmin

Example 12:

Using a key file

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?key1

where key1=key defined in the cgicmd.dat file (the keyname should be the first parameter)

or

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserv+userparam=12+CMDK
EY=key1

*when used with cmdkey, it can be anywhere in the URL

Example 13:

Running a report with a Parameter Form

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserver+report=test.rdf
+userid=scott/tiger@mydb+destype=cache+desformat=htmlcss+PARAMFORM=yes

Example 14:

Running a report with e-mail notification

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserver+report=test.rdf
+userid=scott/tiger@mydb+destype=file+desformat=pdf+desname=test.pdf+NOTIFYSUCCE
SS="[e-mail]"+NOTIFYFAILURE="[e-mail]"

Example 15:

Running a report that specifies a URL to be fetched with the URL engine

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserver+report=test.rdf
+userid=scott/tiger@mydb+destype=file+desformat=pdf+desname=test.pdf+JOBTYPE=rwu
rl+URLPARAMETER="http://www.oracle.com"

Example 16:

Running a report with the traceopts enabled

http://mywebserver.com:7779/cgi-bin/rwcgi.exe?server=myrepserver+report=test.rdf
+userid=scott/tiger@mydb+destype=file+desformat=pdf+desname=test.pdf+TRACEOPTS=t
race_prf+TRACEMODE=trace_replace

A.1.7 rwserver

The rwserver command invokes the Reports Server. The Reports Server processes client requests, which includes ushering them through its various services, such as authentication and authorization checking, scheduling, caching, and distribution (including distribution to custom or pluggable output destinations). Reports Server also spawns runtime engines for generating requested reports, fetches completed reports from the Reports cache, and notifies the client that the job is ready.

Keywords used with rwserver

The brackets surrounding each keyword in this list are there to create a separation between keywords and has no other significance.

rwserver[AUTHID] [AUTOSTART] [BATCH] [SERVER] [SHUTDOWN] [TRACEOPTS] [INSTALL] 
[UNINSTALL][JVMOPTIONS]

Example: rwserver -install myrepserver batch=yes autostart=yes

A.2 Command Line Syntax

Following is the syntax for a command line, where keyword=value is a valid command line option:

rwclient REPORT|MODULE=runfile USERID=username/password@database
[ [keyword=]value|(value1, value2, ...) ] SERVER=server_name

Keywords must be specified and can be used in any order following the command.

A.3 General Usage Notes

• All file names and paths specified in the client command line refer to files and directories on the server machine, except for any file specified for the command file keyword (CMDFILE=). In this case, the CMDFILE specified will be read and appended to the original command line (of which CMDFILE is a part) before being sent to the Reports Server. The runtime engine will not re-read the CMDFILE.

• If you don't specify a path for a keyword value that includes a file name, The Reports Server will try to find the file from the REPORTS_PATH environment variable.

A.4 Command Line Keywords

A.4.1 ACCESSIBLE

Table A-1 indicates which commands can use the ACCESSIBLE keyword.

Table A-1 Commands that can use ACCESSIBLE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use ACCESSIBLE to specify whether accessibility-related features offered through Oracle Reports are enabled (YES) or disabled (NO) for PDF output.

Syntax

ACCESSIBLE={YES|NO}

Values

• YES Accessibility features are enabled for PDF output.

• NO Accessibility feature is not enabled for PDF output.

Default

NO

A.4.2 ARRAYSIZE

Table A-2 indicates which commands can use the ARRAYSIZE keyword.

Table A-2 Commands that can use ARRAYSIZE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use ARRAYSIZE to specify the size (in kilobytes) for use with Oracle9i array processing. Generally, the larger the array size, the faster the report will run.

Syntax

ARRAYSIZE=n

Values

n A number from 1 through 9999 (no comma is used with thousands). This means that Reports Runtime can use this number of kilobytes of memory per query in your report.

Default

10

Usage Notes

ARRAYSIZE can be used when running JSP-based Web reports from the command line.

A.4.3 AUTHID

Table A-3 indicates which commands can use the AUTHID keyword.

Table A-3 Commands that can use AUTHID

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	yes

Description

Use AUTHID to specify the user name and the password to be used to authenticate users to the restricted Reports Server. User authentication ensures that the users making report requests have access privileges to run the requested report.

Syntax

AUTHID=username/password

Values

username/password Any valid user name and password created in OracleAS Portal. See your DBA to create new users accounts in OracleAS Portal.

Default

None

Usage Notes

• AUTHID can be used when running JSP-based Web reports from the command line.

• If you have a Single Sign-On environment, then the Oracle Application Server Single Sign-On Server will perform the authentication step and pass only the user name to the Reports Server in AUTHID.

A.4.4 AUTOCOMMIT

Table A-4 indicates which commands can use the AUTOCOMMIT keyword.

Table A-4 Commands that can use AUTOCOMMIT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use AUTOCOMMIT to specify whether database changes (for example, CREATE) should be automatically committed to the database. Some non-Oracle databases (for example, SQL Server) require that AUTOCOMMIT=YES.

Syntax

AUTOCOMMIT={YES|NO}

Values

• YES Data changes are committed to the database automatically.

• NO Data changes are not committed to the database until the COMMIT command runs or one of the PL/SQL commands that cause the data to be committed runs.

Default

NO

Usage Notes

AUTOCOMMIT can be used when running JSP-based Web reports from the command line.

A.4.5 AUTOSTART

Table A-5 indicates which commands can use the AUTOSTART keyword.

Table A-5 Commands that can use AUTOSTART

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	no	no	yes

Description

Use AUTOSTART to specify that the Reports Server will automatically start after initial installation and after a reboot, without requiring a user logon.

Syntax

AUTOSTART={YES|NO}

Values

• YES The service will automatically start at reboot, without requiring a user logon.

• NO The service will not automatically start at reboot, requiring a user logon.

Default

NO

Usage Notes

The AUTOSTART keyword is only recognized on Microsoft Windows platforms.

A.4.6 BACKGROUND

Table A-6 indicates which commands can use the BACKGROUND keyword.

Table A-6 Commands that can use BACKGROUND

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	no	no	no	yes	yes	no

Description

BACKGROUND specifies whether a report on the server should be run synchronously (NO) or asynchronously (YES).

Note: The BACKGROUND system parameter is deprecated in Oracle Reports. BACKGROUND is used only on the command line.

Syntax

BACKGROUND={YES|NO}

Values

• YES Runs the report asynchronously. The client sends the call to the server, then continues with other processes without waiting for the report job to complete. If the client process is killed, the job is canceled.

• NO Runs the report synchronously. The client waits for the report to queue, be assigned to a runtime engine, run, and finish.

Default

NO

Usage Notes

If BACKGROUND=YES is used with rwbuilder or rwrun, a warning is issued and the keyword is ignored.

A.4.7 BATCH

Table A-7 indicates which commands can use the BATCH keyword.

Table A-7 Commands that can use BATCH

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	yes

Description

For all relevant commands, the BATCH option tells the server to run in no-UI mode. How it is used across commands is similar in that no UI is produced by the application when running from a command line that includes BATCH=YES. For example, for rwserver this allows the server to be run from scripts and remote agents so that no server dialog comes up while it is running.

With rwconverter, BATCH suppresses all terminal input and output in order to convert reports/libraries without user intervention. With rwserver, BATCH turns the server window dialog off (YES) or on (NO) to display or suppress process messages.

Syntax

BATCH={YES|NO}

Values

• YES Suppresses all terminal input and output (report is run in the background). This is the default for rwrun.

• NO Allows special terminal input and output. For rwconverter, the Convert dialog box is displayed, and when you accept the dialog box, the conversion is performed.

Default

NO

Usage Notes

• If BATCH=YES, error messages are sent to SYSOUT. For more information on SYSOUT, see DESNAME.

• If BATCH=YES, PARAMFORM=YES is invalid because it is not meaningful to have the Runtime Parameter Form appear in batch mode.

A.4.8 BCC

Table A-8 indicates which commands can use the BCC keyword.

Table A-8 Commands that can use BCC

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use BCC to specify e-mail recipient(s) of a blind courtesy copy (that is, one in which the names of specified recipients are not visible (published) to other recipients).

Note: A blind copy is one in which the names of specified recipients are not visible (published) to other recipients.

Syntax

BCC=emailid | ("emailid","emailid", ...)

Values

emailid A valid e-mail address in the form [e-mail].

Default

None

Usage Notes

• To specify more than one e-mail address, enclose the list of addresses in quotation marks and separate each address in the list with a comma.

• Related keywords include BCC, CC, FROM, REPLYTO, and SUBJECT. Note that DESNAME is used to specify the main recipient(s) of the e-mail.

• BCC can be used when running JSP-based Web reports from the command line.

A.4.9 BLANKPAGES

Table A-9 indicates which commands can use the BLANKPAGES keyword.

Table A-9 Commands that can use BLANKPAGES

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use BLANKPAGES to specify whether to suppress blank pages when you print a report. Use this keyword when there are blank pages in your report output that you do not want to print.

Syntax

BLANKPAGES={YES|NO}

Values

• YES Print all blank pages.

• NO Do not print blank pages.

Default

YES

Usage Notes

BLANKPAGES is especially useful if your logical page spans multiple physical pages (or panels), and you wish to suppress the printing of any blank physical pages.

A.4.10 BUFFERS

Table A-10 indicates which commands can use the BUFFERS keyword.

Table A-10 Commands that can use BUFFERS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use BUFFERS to specify the size of the virtual memory cache in kilobytes. You should tune this setting to ensure that you have enough space to run your reports, but not so much that you are using too much of your system's resources.

Syntax

BUFFERS=n

Values

n A number from 1 through 9999 (note that thousands are not expressed with any internal punctuation, e.g., a comma or a decimal point). For some operating systems, the upper limit might be lower.

Default

640

Usage Notes

• If this setting is changed in the middle of your session, then the change does not take effect until the next time the report is run.

• BUFFERS can be used when running JSP-based Web reports from the command line.

A.4.11 CACHELOB

Table A-11 indicates which commands can use the CACHELOB keyword.

Table A-11 Commands that can use CACHELOB

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use CACHELOB to specify whether to cache retrieved ORACLE large object or objects in the temporary file directory on the Reports Server (specified in the environment variable REPORTS_TMP or by the tempDir property of the engine element in the Reports Server configuration file, server_name.conf; note that a tempDir setting overrides a REPORTS_TMP setting.).

Syntax

CACHELOB={YES|NO}

Values

• YES The LOB will be cached in the temporary file directory.

• NO The LOB will not be cached in the temporary file directory.

Default

YES

Usage Notes

• You can only set this option on the command line.

• If the location of the temporary file directory on the server does not have sufficient available disk space, then it is preferable to set this value to NO. Setting the value to NO, however, might decrease performance, as the LOB might need to be fetched from the database multiple times.

• CACHELOB can be used when running JSP-based Web reports from the command line.

A.4.12 CC

Table A-12 indicates which commands can use the CC keyword.

Table A-12 Commands that can use CC

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use CC to specify e-mail recipient(s) of a courtesy copy.

Syntax

CC=emailid | ("emailid","emailid", ...)

Values

emailid A valid e-mail address in the form [e-mail].

Default

None

Usage Notes

• To specify more than one e-mail address, enclose the list of addresses in quotation marks and separate each address in the list with a comma.

• Related keywords include BCC, CC, FROM, REPLYTO, and SUBJECT. Note that DESNAME is used to specify the main recipient(s) of the e-mail.

A.4.13 CELLWRAPPER

Table A-13 indicates which commands can use the CELLWRAPPER keyword.

Table A-13 Commands that can use CELLWRAPPER

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use CELLWRAPPER to specify the character or characters that displays around the delimited cells in your report output.

Syntax

CELLWRAPPER=value

Values

value Any alphanumeric character or string of alphanumeric characters.

Table A-14 Valid Values - General

Value	Description
"	A double quotation mark displays on each side of the cell
'	A single quotation mark displays on each side of the cell

Table A-15 Valid Values - Reserved

Value	Description
tab	A tab displays on each side of the cell
space	A single space displays on each side of the cell
return	A new line displays on each side of the cell
none	No cell wrapper is used

Table A-16 Valid Values - Escape Sequences based on the ASCII Character set

Value	Description
\t	A tab displays on each side of the cell
\n	A new line displays on each side of the cell

Default

None

Usage Notes

• This keyword can only be used if you have specified DESFORMAT=DELIMITED or DESFORMAT=DELIMITEDDATA.

• The cell wrapper is different from the actual delimiter. The cell wrapper specifies what character appears around delimited data. The delimiter indicates the boundary or break point between two pieces of data.

A.4.14 CMDFILE

Table A-17 indicates which commands can use the CMDFILE keyword.

Table A-17 Commands that can use CMDFILE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	yes	no	no	no

Description

Use CMDFILE to call a file that contains one report's command line options. The file called must be an ASCII file, either .txt or any other ASCII-type file.

CMDFILE differs from the cgicmd.dat file, in that CMDFILE can contain one command line for one report, where the cgicmd.dat file can contain multiple key-identified commands for multiple reports. Additionally, the CMDFILE keyword can be used along with other arguments in a command line; while, when you use the key argument associated with cgicmd.dat, it is the only argument that appears in the command line.

The CMDFILE keyword enables you to run a report without specifying a large number of options each time you invoke a run command.

Syntax

CMDFILE=filename

Values

filename Any valid command file name.

Default

None

Usage Notes

• With rwservlet and rwcgi, use the CMDKEY keyword to refer to a key in the cgicmd.dat file in lieu of using the CMDFILE keyword.

• A command file can reference another command file.

• The syntax for a command line you specify in the command file is identical to that used on the command line.

• Values entered on the command line override values specified in command files. For example, suppose you specify rwclient from the command line with COPIES set to 1 and CMDFILE set to RUNONE (a command file). The RUNONE file also specifies a value for COPIES, but it is set to 2. The value specified for COPIES in the command line (1) overrides the value specified for COPIES in the RUNONE file (2). Only one copy of the report will be generated.

• The value for this keyword might be operating system-specific.

A.4.15 CMDKEY

Table A-18 indicates which commands can use the CMDKEY keyword.

Table A-18 Commands that can use CMDKEY

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	no	no

Description

Use CMDKEY to call a key-identified command line in the cgicmd.dat file. For example:

http://yourwebserver/reports/rwservlet?cmdkey=key& ...

Syntax

CMDKEY=key

Values

key The name of any key associated with a command line specified in the cgicmd.dat file.

Default

None

Usage Notes

• When you use CMDKEY with rwservlet, you can use it in any order in the command line (or the URL, following the question mark). With rwservlet, you can use additional command line keywords along with CMDKEY.

• CMDKEY can be used when running JSP-based Web reports from the command line.

A.4.16 COLLATE

Table A-19 indicates which commands can use the COLLATE keyword.

Table A-19 Commands that can use COLLATE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description:

Use Collate to control the collating behavior when a report is output to a printer.

For example, printing three copies of a three page document with COLLATE set to YES would result in output similar to the following:

1 2 3|1 2 3| 1 2 3

The order specified is the page numbers being printed. This behavior is similar to selecting the Collate check box in the Print dialog box.

Printing three copies of a three page document with COLLATE set to NO would result in output similar to the following:

1 1 1| 2 2 2| 3 3 3

Syntax

COLLATE={YES|NO}

Values

• YES Collates the pages when output to a printer.

• NO Does not collate the pages when output to a printer.

Default

YES

A.4.17 CONTENTAREA

Table A-20 indicates which commands can use the CONTENTAREA keyword.

Table A-20 Commands that can use CONTENTAREA

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use CONTENTAREA to specify the Oracle9iAS Portal Release 1 content area to which report output should be pushed. This keyword is maintained for backward compatibility with Oracle9iAS Portal Release 1; for backward compatibility with Oracle WebDB Release 2.2, see SITENAME. Beginning with OracleAS Portal Release 2, use PAGEGROUP.

Syntax

CONTENTAREA=name

Values

name The name (internal name) of any valid Oracle9iAS Portal Release 1 content area.

Default

None

Usage Notes

• Use of this keyword is required to push Oracle Reports output to Oracle9iAS Portal Release 1.

• The CONTENTAREA name should be the internal name and not the display name. The internal name is used to uniquely identify the Oracle9iAS Portal Release 1 component instance.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.18 COPIES

Table A-21 indicates which commands can use the COPIES keyword.

Table A-21 Commands that can use COPIES

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use COPIES to specify the number of copies of the report output to print.

Syntax

COPIES=n

Values

n Any valid integer from 1 through 9999 (note that thousands are not expressed with any internal punctuation, e.g., a comma or a decimal point).

Default

Taken from the Initial Value property of the COPIES parameter (the Initial Value was defined in Reports Builder at design time).

Usage Notes

• This keyword is ignored if DESTYPE is not PRINTER.

• If COPIES is left blank on the Runtime Parameter Form, then it defaults to one.

A.4.19 CUSTOMIZE

Table A-22 indicates which commands can use the CUSTOMIZE keyword.

Table A-22 Commands that can use CUSTOMIZE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	yes	yes	yes	no

Description

Use CUSTOMIZE to specify an Oracle Reports XML file to be run against the current report. The XML file contains customizations (for example, changes to the layout or data model) that change the report definition in some way.

Syntax

CUSTOMIZE=filename.xml | (filename1.xml, filename2.xml, ...)

Values

filenamen.xml The names of the files that contain a valid XML report definition, with path information prefixed to the name(s) if necessary. (if the files are not located in a path specified in the REPORTS_PATH registry or SourceDir property for the engine element).

Note: For more information on customizing reports at runtime with XML customization files, see Customizing Reports with XML.

Default

None

Usage Notes

• Typically, the file extension of an XML report definition is .xml, but it does not have to be when it is used with the CUSTOMIZE keyword.

• CUSTOMIZE can be used when running JSP-based Web reports from the command line.

A.4.20 DATEFORMATMASK

Table A-23 indicates which commands can use the DATEFORMATMASK keyword.

Table A-23 Commands that can use DATEFORMATMASK

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use DATEFORMATMASK to specify how date values display in your delimited report output.

Syntax

DATEFORMATMASK=mask

Values

mask Any valid date format mask.

Default

None

Usage Notes

• This keyword can only be used if you have specified DESFORMAT=DELIMITED or DESFORMAT=DELIMITEDDATA.

  Note: For valid DATEFORMATMASK values see the Reports Builder online help topic, "Date and Time Format Mask Syntax."

• DATEFORMATMASK can be used when running JSP-based Web reports from the command line.

A.4.21 DELAUTH

Table A-24 indicates which commands can use the DELAUTH keyword.

Table A-24 Commands that can use DELAUTH

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use DELAUTH to delete rwservlet or rwcgi user ID cookies.

Syntax

http://yourwebserver/reports/rwservlet/delauth[?][server=servername][&authid=use
rname/password]

Values

See Syntax.

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• Related keywords are SERVER and AUTHID.

A.4.22 DELIMITED_HDR

Table A-25 indicates which commands can use the DELIMITED_HDR keyword.

Table A-25 Commands that can use DELIMITED_HDR

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use DELIMITED_HDR to turn off boilerplate text (such as the report header) when running a report with DESFORMAT=DELIMITED or DESFORMAT=DELIMITEDDATA.

Syntax

DELIMITED_HDR={YES|NO}

Values

• YES Turn off all boilerplate text in the delimited output file.

• NO Leave boilerplate text as is in the delimited output file.

Default

YES

Usage Notes

This keyword can be used only if you have specified DESFORMAT=DELIMITED or DESFORMAT=DELIMITEDDATA.

A.4.23 DELIMITER

Table A-26 indicates which commands can use the DELIMITER keyword.

Table A-26 Commands that can use DELIMITER

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use DELIMITER to specify the character or characters to use to separate the cells in your report output.

Syntax

DELIMITER=value

Values

value Any alphanumeric character or string of alphanumeric characters, such as:

a

Table A-27 Valid Values - General

Values	Description
,	A comma separates each cell
.	A period separates each cell

Any of these reserved values:

Table A-28 Valid Values - Reserved

Values	Description
tab	A tab separates each cell
space	A space separates each cell
return	A new line separates each cell
none	No delimiter is used

Table A-29 Valid Values - Escape Sequence based on the ASCII Character set

Values	Description
\t	A tab separates each cell
\n	A new line separates each cell

Default

Tab

Usage Notes

This keyword can be used only if you have specified DESFORMAT=DELIMITED or DESFORMAT=DELIMITEDDATA.

A.4.24 DESFORMAT

Table A-30 indicates which commands can use the DESFORMAT keyword.

Table A-30 Commands that can use DESFORMAT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use DESFORMAT to specify the format for the job output. Use DESFORMAT to specify the printer driver to be used when DESTYPE is FILE and DESNAME=filename.

Syntax

DESFORMAT=desformat

Values

Any valid destination format not to exceed 1 kilobyte in length. Examples of valid values for this keyword are listed and described in Table A-31.

Table A-31 Valid values for DESFORMAT

Value	Description
DELIMITED	The report output is sent to a file that can be read by standard spreadsheet utilities, such as Microsoft Excel. If you do not specify a delimiter (via the DELIMITER keyword), the default delimiter is a TAB. See Usage Notes.
DELIMITEDDATA	Provides the same functionality as DELIMITED, and is used when you have problems running large volume reports with DESFORMAT=DELIMITED. See Usage Notes.
HTML	This report output is sent to a file that is in HTML format.
HTMLCSS	This report output is sent to a file that includes style sheet extensions.
PDF	This report output is sent to a file that is in PDF format and can be read by a PDF viewer, such as Adobe Acrobat. PDF output is based upon the currently configured printer for your system. The drivers for the currently selected printer are used to produce the output; you must have a printer configured for the machine on which you are running the report.
POSTSCRIPT	This report output is sent to a file that is in PostScript format.
PRINTER DEFINITION	The printer definition to use when formatting the report when DESTYPE=FILE and DESNAME=filename: If MODE=BITMAP, this is the name of the printer. If MODE=CHARACTER, this is the character-mode printer definition file (.prt file), such as hpl, hplwide, dec, decwide, decland, dec180, dflt, or wide. Ask your System Administrator for a list of valid printer definitions.
RTF	The report output is sent to a file that can be read by word processors (such as Microsoft Word). When you open the file in Microsoft Word, you must choose View > Page Layout to view all the graphics and objects in your report.
XML	This report output is saved as an XML file. This report can be opened and read in an XML-supporting browser, or your choice of XML viewing application.

Default

Taken from the Initial Value property of the DESFORMAT parameter (the Initial Value was defined in Reports Builder at design time). When you run a report via Reports Builder and DESFORMAT is blank or dflt, then the current printer driver (specified in File > Printer ) is used. If a Printer Name has not been selected using the drop down list, then Reports Builder defaults to PostScript.

Usage Notes

• The value or values for this keyword might be case sensitive, depending on your operating system.

• When DESFORMAT=HTML or DESFORMAT=HTMLCSS, spaces are replaced with  . This default behavior eliminates alignment issues for number values that are right-aligned. If you do not want spaces replaced with   in your HTML and HTMLCSS output, then you must set REPORTS_NO_HTML_SPACE_REPLACE to YES. This removes the functionality of the DELIMITER command line keyword for HTML and HTMLCSS output (DELIMITER is still valid when DESFORMAT=DELIMITED).

• DESFORMAT=DELIMITED is not supported in a .dst file. In this case, Oracle Reports displays error:

  REP-34305: Invalid keyword setting for the destid='DEST1'
  
  

• When DESFORMAT=DELIMITEDDATA, the DelimitedData driver runs off the data model and operates in much the same way as the XML driver. Since the driver runs off the data model, any formatting changes defined in the layout are not reflected in the DelimitedData output. You can set the following column properties to alter column names and exclude columns from the DelimitedData output file:
  • The XML Tag property can be used to enter a column alias.

  • The Exclude from XML Output property can be used to exclude the column from the DelimitedData output.

  The DelimitedData functionality also honors the DELIMITER, CELLWRAPPER, NUMBERFORMATMASK, and DATEFORMATMASK command line options just as the DELIMITED does.

• When you open RTF output generated by Oracle Reports in Microsoft Word 95 for Japanese, you may encounter anomalies in the output, such as dashes not appearing correctly. These issues are specific to Microsoft Word 95 and do not occur in Microsoft Word 97 for Japanese.

A.4.25 DESNAME

Table A-32 indicates which commands can use the DESNAME keyword.

Table A-32 Commands that can use DESNAME

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use DESNAME to specify the name of the cache, file, printer, OracleAS Portal, or e-mail ID (or distribution list) to which the report output will be sent.

Syntax

DESNAME=desname

Values

desname Any valid cache destination, file name, printer name, e-mail ID, or OraclePortal, not to exceed 1K in length. For printer names, you can optionally specify a port. For example:

DESNAME=printer,LPT1:
DESNAME=printer,FILE:

Default

Taken from the Initial Value property of the DESNAME parameter (the Initial Value was defined in Reports Builder at design time). If DESTYPE = FILE and DESNAME is an empty string, then it defaults to reportname.lis at runtime.

Usage Notes

• The value(s) for this keyword might be case sensitive, depending on your operating system.

• To send the report output by e-mail, specify the e-mail ID as you do in your e-mail application (any SMTP-compliant application). You can specify multiple user names by separating them with commas, and without spaces. For example:

  name,name,name
  
  

• In some cases, this keyword may be overridden by your operating system.

A.4.26 DEST

Table A-33 indicates which commands can use the DEST keyword.

Table A-33 Commands that can use DEST

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use DEST to specify the name(s) of the converted reports or libraries.

Syntax

DEST={dest_name|(dest_name1, dest_name2, ...)|pathname}

Values

dest_name Any valid report/library name or filename, or a list of valid report/library names of filenames enclosed in parentheses and separated by commas (e.g., (qanda,text,dmast)).

Default

If the DEST keyword is not specified, rwconverter uses the following default names:

• If DTYPE is PLDFILE, then the DEST default name is source.pld.

• If DTYPE is PLLFILE, then the DEST default name is source.pll.

• If DTYPE is RDFFILE, then the DEST default name is source.rdf.

• If DTYPE is REPFILE, then the DEST default name is source.rep.

• If DTYPE is REXFILE, then the DEST default name is source.rex.

• If DTYPE is XMLFILE, then the DEST default name is source.xml.

• If DTYPE is REGISTER, then the DEST default name is the name of the SQL*Plus script output file (e.g., output.sql).

Usage Notes

• A list of report/library names of filenames must be enclosed in parentheses with commas separating each entry. For example:

  (qanda,test,dmast) or (qanda, test, dmast)
  

• If you have more destination names than there are source names, the extra destination names are ignored. If you have fewer destination names than there are source names, default names will be used after the destination names run out.

• The value(s) for the DEST keyword may be operating system-specific.

• When DTYPE = REGISTER, multiple destinations are not required. If you list more than one SQL*Plus script file name for DEST, only the first one is recognized. The others are ignored.

A.4.27 DESTINATION

Table A-34 indicates which commands can use the DESTINATION keyword.

Table A-34 Commands that can use DESTINATION

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use the DESTINATION keyword to specify the name of an XML file that defines the distribution for the current run of the report.

Note: XML based distribution files must have the.xml extension.

Syntax

DESTINATION=filename.xml

Values

filename.xml The name of an XML file that defines a report or report section distribution.

Default

None

Usage Notes

To enable the DESTINATION keyword, you must specify DISTRIBUTE=YES on the command line. If both these keywords are specified, DESTYPE, DESNAME, and DESFORMAT are ignored if they are also specified.

Note: For more information about creating advanced distributions, see Chapter 15, "Creating Advanced Distributions".

A.4.28 DESTYPE

Table A-35 indicates which commands can use the DESTYPE keyword.

Table A-35 Commands that can use DESTYPE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use DESTYPE to specify the type of device that will receive the report output. If you have created your own pluggable destination via the Oracle Reports Destination API, this is how the destination you created gets called.

Syntax

DESTYPE={CACHE|LOCALFILE|FILE|PRINTER|SYSOUT|MAIL|ORACLEPORTAL|FTP|WEBDAV|name_of_pluggable_destination}

Values

Table A-36 lists and describes the valid values for the DESTYPE keyword.

Table A-36 Valid values for the DESTYPE keyword

Value	Description
CACHE	Sends the output directly to the Reports Server cache.
LOCALFILE	Valid only for rwclient, rwcgi, and rwservlet. Sends the output to a file on the client machine, synchronously or asynchronously.
FILE	Sends the output to the file on the server named in DESNAME.
PRINTER	Sends the output to the printer on the server named in DESNAME. You must have a printer that the OracleAS Reports Services can recognize installed and running.
SYSOUT	Valid only for rwcgi. Sends the output to the client machine's default output device and forces a synchronous call.
MAIL	Sends the output to the mail users specified in DESNAME. You can send mail to any mail system that works with SMTP. Note: The configuration file rwbuilder.conf must include the pluginParam mailServer with the outgoing mail server name. This applies in both Windows and Solaris environment
ORACLEPORTAL	Valid for rwservlet, rwcgi, and rwclient. Sends the output to OracleAS Portal. Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SCHEDULE, SITENAME*,STATUSFOLDER*,STATUSPAGE. * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.
FTPFoot 1	Valid for rwservlet,rwclient,rwcgi,and rwrun. Sends the output to the specified FTP server.
WEBDAVFoot 2	Valid for rwservlet,rwclient,rwcgi,and rwrun. Sends the output to the specified WebDAV URL so that the report can be published directly.
name_of_pluggable_destination	If you have created your own pluggable destination via the Oracle Reports Destination API, this is what you use to call the destination you created.

1 For more information about this pluggable destination, see the Oracle Reports Plugin Exchange on OTN (http://otn.oracle.com/products/reports/pluginxchange/content.html) 2 For more information about this pluggable destination, see the Oracle Reports Plugin Exchange on OTN (http://otn.oracle.com/products/reports/pluginxchange/content.html)

Default

Taken from the Initial Value property of the DESTYPE parameter (the Initial Value was defined in Reports Builder at design time).

Usage Notes

• With Oracle Reports, DESTYPE values of SCREEN and PREVIEW are no longer valid because the Reports Runtime (rwrun) user interface is obsolete. In Reports Builder (rwbuilder), you can still set the DESTYPE system parameter to SCREEN or PREVIEW to format a report to display screen fonts or printer (preview) fonts in the Reports Builder user interface.

• DESTYPE=printer: On Windows, the hardware-based left margin is ignored, by default. The printing origin starts from the top left corner (0,0) of the physical paper and not the printable area. This is to facilitate the design of printer hardware-based margin independent reports. Printing reports without hardware-based left margins on Windows You must ensure that your report's layout contains enough margin spacing such that your data falls within the printable area. Margin fields in the Page Setup dialog have been disabled to ensure consistency with OracleAS Reports Services. To revert to the old behavior of including the hardware margin, set the REPORTS_ADD_HWMARGIN environment variable to YES.

• DESTYPE=ORACLEPORTAL:

  The ORACLEPORTAL destination cannot be used with distribution. Instead, you can use DESTYPE=WEBDAV for advanced XML based distribution to OracleAS Portal.

  Note: Ensure that the OracleAS Portal instance should be WebDAV-enabled. Refer to the OracleAS Portal online help for more information on how to enable WebDAV. For more information on how to use WebDAV for distribution to OracleAS Portal, refer to the Tech note at: http://webiv.oraclecorp.com/cgi-bin/webiv/do.pl/Get?WwwID=note:241821.

  The DESTYPE=ORACLEPORTAL destination cannot be used with the rwrun executable as it causes Reports Server to stop responding. Use this destination only with rwservlet, rwclient, or rwcgi.

  Before you push Oracle Reports output to Oracle9iAS Portal Release 1 ensure that you have created the following:

  • A valid OUTPUTPAGE containing at least one item region

  • A valid PAGEGROUP containing at least one item region

  Additionally, you need to edit the Reports Server configuration file as follows:

  1. Uncomment the destype=oraclePortal element.

     <destination
        destype="oraclePortal"
        class="oracle.reports.server.DesOraclePortal">
        <!--property name="portalUserid"
                  value="%PORTAL_DB_USERNAME%/%PORTAL_DB_
                          PASSWORD%@%PORTAL_DB_TNSNAME%" 
                  confidential="yes"
                  encrypted="no"/--> 
     </destination>
     

     Note: In Oracle9i Reports 9.0.2, by default, the portalUserid property is uncommented and the connection string in the property points to the infrastructure database. In order to be able to push your reports output to Oracle9iAS Portal Release 1 the portalUserid must remain uncommented. In Oracle Reports 10g (9.0.4), by default, the portalUserid is commented out. Reports Server will determine the connection string and push the report to Oracle9iAS Portal Release 1. You need to uncomment this only if you are using a different OracleAS Portal instance.

  2. Substitute the values in the portalUserid property with your OracleAS Portal connection information if you do not want to push an Oracle Reports output to the default Oracle9iAS Portal Release 1 instance.

     Note: If you do not substitute the values or uncomment the destype entry, you will get the following error: REP-56092: No class defined for destination type oracleportal

  Running the request is very similar to any other out-of-the-box destinations. For example:

  http://your_server:port/reports/rwservlet?        
  report=test.rdf&userid=scott/tiger@repportal&authid=pushportal/trial&destype
  =oracleportal&desformat=PDF&pagegroup=PORTAL_REPORTS&outputpage=reports_
  output&itemtitle=pushtoportal&statuspage=result 
  

• DESTYPE=FTP: Running the request is very similar to any other out-of-the-box destinations. You need to specify the complete FTP URL location along with the file name. If the FTP server needs an authentication, that also needs to be part of the URL as shown in the following example:

  http://your_
  server:port/reports/rwservlet?report=rep.jsp&destype=FTP&desname=ftp://user:
  pwd@ftpServer/dir/myreport.pdf&desformat=pdf 
  

  In the above example, the DESTYPE is FTP and the DESNAME value is a complete FTP URL location along with the report name myreport.pdf.

  To use a proxy server, edit the destination element (configured for FTP out-of-the-box) in the Reports Server configuration file:

  <destination destype="ftp" 
  class="oracle.reports.plugin.destination.ftp.DesFTP"> 
  <!--property name="proxy" value="proxyinfo.xml"/--> 
  </destination> 
  
  

  To specify the proxy information, edit the proxyinfo.xml file available in the default location (ORACLE_HOME\reports\conf). Uncomment the previous property entry and specify the complete path to the proxyinfo.xml file as the value.

  For example, if your ORACLE_HOME is located in D:\9iAS, then the default location for proxyinfo.xml can be specified as:

  <destination destype="ftp" 
  class="oracle.reports.plugin.destination.ftp.DesFTP"> 
      <property name="proxy" value="D:\\9iAS\\reports\\conf\\proxyinfo.xml"/> 
  

  </destination>

• DESTYPE=WEBDAV: Running the request is very similar to any other out-of-the-box destinations. You need to specify the complete WEBDAV URL location along with the file name. If the WEBDAV server needs an authentication, that also needs to be part of the URL as shown in the following example:

  http://your_
  server:port/reports/rwservlet?report=rep.jsp&destype=WebDAV&desname=http://u
  ser:pwd@webdavServer/myreport.pdf&desformat=pdf 
  
  

  In the above example, the DESTYPE is WEBDAV and the DESNAME value is a complete WEBDAV URL location along with the report name myreport.pdf.

  To use a proxy server, edit the destination element (configured for WEBDAV out-of-the-box) in the Reports Server configuration file:

  <destination destype="WebDav" 
  class="oracle.reports.plugin.destination.webdav.DesWebDAV"> 
        <!--property name="proxy" value="proxyinfo.xml"/--> 
   </destination> 
  
  

  To specify the proxy information, edit the proxyinfo.xml file available in the default location (ORACLE_HOME\reports\conf). Uncomment the property entry above and specify the complete path to the proxyinfo.xml file as the value.

  For example, if your ORACLE_HOME is located in D:\9iAS, then the default location for proxyinfo.xml can be specified as:

  <destination destype="WebDav" 
  class="oracle.reports.plugin.destination.webdav.DesWebDAV"> 
      <property name="proxy" value="D:\\9iAS\\reports\\conf\\proxyinfo.xml"/> 
  

  </destination>

A.4.29 DISTRIBUTE

Table A-37 indicates which commands can use the DISTRIBUTE keyword.

Table A-37 Commands that can use DISTRIBUTE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use DISTRIBUTE to enable or disable distributing the report output to multiple destinations, as specified by the distribution list defined in the report distribution definition (defined in Reports Builder at design time) or a distribution XML file.

Syntax

DISTRIBUTE={YES|NO}

Values

• YES Distribute the report to the distribution list.

• NO Ignore the distribution list and output the report as specified by the DESNAME, DESTYPE, and DESFORMAT parameters. This is fundamentally a debug mode to allow running a report set up for distribution without actually executing the distribution.

Default

NO

Usage Notes

The DISTRIBUTE keyword works in close association with the DESTINATION keyword. DISTRIBUTE must have a value of YES for the DESTINATION keyword to take effect. If both these keywords are specified, DESTYPE, DESNAME, and DESFORMAT are ignored if they are also specified.

Note: For more information about creating advanced distributions, see Creating Advanced Distributions.

A.4.30 DTYPE

Table A-38 indicates which commands can use the DTYPE keyword.

Table A-38 Commands that can use DTYPE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use DTYPE to specify the format to which to convert the reports or libraries.

Syntax

DTYPE={PLDFILE|PLLFILE|RDFFILE|REPFILE|REXFILE|TDFFILE|XMLFILE|JSPFILE|REGISTER}

Values

The following values apply:

• PLDFILE The converted PL/SQL libraries will be stored in files in ASCII format.

• PLLFILE The converted PL/SQL libraries will be stored in files containing source code and P-code (compiled PL/SQL).

• RDFFILE The converted report(s) will be stored in one or more report definition files (files with the .rdf extension).

• REPFILE The converted report(s) will be stored in one or more binary runfiles (files with the .rep extension).

• REXFILE The converted report(s) will be stored in one or more text files (files with the .rex extension).

• TDFFILE The report will be converted to a template file (files with the .tdf extension).

• XMLFILE The converted report(s) will be stored in an XML file (files with the .xml extension).

• JSPFILE The converted report(s) will be stored in a JSP file (files with the .jsp extension).

• REGISTER A script file is created to load each report specified by SOURCE into OracleAS Portal with the RWWWVREG.REGISTER_REPORT function. Each load function is populated with the necessary information to register the report in OracleAS Portal. By running the resulting script file in SQL*Plus against the Oracle Application Server DB Provider, you can batch register multiple reports in OracleAS Portal.

Default

REPFILE

Usage Notes

• When you try to create a .rep file using rwconverter, the source report's PL/SQL is automatically compiled. If there are compile errors, an error message is displayed and the .rep file is not created. To avoid this problem, make sure you compile the source report's PL/SQL using File > Administration > Compile Report in Reports Builder, before you try to create a .rep file.

• When converting a report to a template, only objects in the report's header and trailer sections and the margin area are used in the template. Objects in the main section are ignored.

A.4.31 DUNIT

Table A-39 indicates which commands can use the DUNIT keyword.

Table A-39 Commands that can use DUNIT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use DUNIT to specify the destination unit of measurement to which the report should be converted. If specified, DUNIT must differ from the SOURCE report's unit of measurement. If unspecified, the SOURCE report's unit of measurement is used.

Syntax

DUNIT={CENTIMETER|CHARACTER|INCH|POINT}

Values

• CENTIMETER The converted reports will initially use centimeters as the unit of measurement

• CHARACTER The converted reports will initially use characters as the unit of measurement.

• INCH The converted reports will initially use inches as the unit of measurement.

• POINT The converted reports will initially use points as the unit of measurement

Default

Null (the report's unit of measurement is used).

A.4.32 ENGINERESPONSETIMEOUT

Table A-40 indicates which command can use the ENGINERESPONSETIMEOUT keyword.

Table A-40 Commands that can use ENGINERESPONSETIMEOUT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	no	no	no	yes	yes	no

Description

Use ENGINERESPONSETIMEOUT to specify the maximum amount of time (in minutes) for an engine to update the status of the job while running a report in your environment. If it takes longer than this amount of time to update the job status for some reason (e.g., due to the engine hanging or a long blocking SQL query), then Reports Server terminates the job.

This parameter overrides the engineResponseTimeOut attribute of the engine element in the Reports Server configuration file. Refer to engine for further information about the engine element.

Syntax

ENGINERESPONSETIMEOUT=number

Values

number A number of minutes (e.g., 5).

Default

None

A.4.33 EXPIRATION

Table A-41 indicates which command can use the EXPIRATION keyword.

Table A-41 Commands that can use EXPIRATION

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	no	no	no	yes	yes	no

Description

Use EXPIRATION to define how long report output can exist in cache before it is deleted.

See Reusing Report Output from Cache for more information on duplicate job detection.

Syntax

EXPIRATION=time_string

Values

time_string Is in one of two formats:

• n{unit}, for a number with an optional unit. The unit can be minute(s), hour(s), or day(s). The default unit is minute(s) if no unit is specified.

• {Mon DD, YYYY} hh:mi:ss am|pm {timezone}, for a date/time format. Date information is optional. If it isn't specified, today is assumed. Time zone is also optional. If it isn't specified, the Reports Server's timezone is used. The date/time is always in a US locale. This format is the same as defined in the Java DateFormat.MEDIUM type.

Default

None

A.4.34 EXPIREDAYS

Table A-42 indicates which commands can use the EXPIREDAYS keyword.

Table A-42 Commands that can use EXPIREDAYS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use EXPIREDAYS to specify the number of days after which the Oracle Reports output pushed to Oracle9iAS Portal Release 1 should be expired.

Syntax

EXPIREDAYS={PERMANENT|1 day|2 days|3 days|7 days|14 days|31 days|60 days|90 days|120 days}

Values

• PERMANENT Does not expire.

• n days Expires after n days.

Default

None

Usage Notes

• Use of this keyword is optional to push Oracle Reports output to Oracle9iAS Portal Release 1.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.35 EXPRESS_SERVER

Table A-43 indicates which commands can use the EXPRESS_SERVER keyword.

Table A-43 Commands that can use EXPRESS_SERVER

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use EXPRESS_SERVER to specify the Express Server to which you want to connect.

Syntax

EXPRESS_SERVER="server=server/domain=domain/user=userid/password=passwd"

Syntax with RAM

EXPRESS_SERVER="server=server/domain=domain/user=userid/password=passwd/ramuser=ramuserid/rampassword=rampasswd/ramexpressid=ramexpid/ramserverscript=ramsscript/rammasterdb=ramdb/ramconnecttype=ramconn"

Values

A valid connect string enclosed in double quotes (") where:

Table A-44 Connect String Values

Values	Description
server	The Express Server string (for example, ncacn_ip_tcp:olap2-pc/sl=x/st=x/ct=x/sv=x/). See below for more details on the server string.
domain	The Express Server domain.
user	The user ID to log on to the Express Server.
password	The password for the user ID.
ramuser	The user ID to log into the RDBMS.
rampassword	The password for the RDBMS.
ramexpressid	The Oracle Sales Analyzer database user ID. This is required for Oracle Sales Analyzer databases only.
ramserverscript	The complete file name (including the full path) of the remote database configuration file (RDC) on the server. This file specifies information such as the location of code and data databases. Using UNC (Universal Naming Convention) syntax allows multiple users to use the same connection to access the data without having to map the same drive letter to that location. UNC syntax is \\ServerName\ShareName\ followed by any subfolders or files.
rammasterdb	The name of the Relational Access Manager database to attach initially. You must specify only the database file name. This database must reside in a directory that is included in the path list in ServerDBPath for Express Server. You can check the ServerDBPath in the File I/O tab of the Express Configuration Manager dialog box.
ramconnecttype	The type of Express connection. Always specify 0 for a direct connection.

Parameters

The server value contains four parameters that correspond to settings that are made in the Oracle Express Connection Editor and stored in connection (XCF) files. All four parameters are required and can be specified in any order. Table A-45 describes the parameters and their settings:

Table A-45 Settings for parameters used with EXPRESS_SERVER's server value

Parameter	Description	Setting
sl	Server Login	-2: Host (Domain Login) -1: Host (Server Login) 0: No authentication required 1: Host (Domain Login) and Connect security 2: Host (Domain Login) and Call security 3: Host (Domain Login) and Packet security 4: Host (Domain Login) and Integrity security 5: Host (Domain Login) and Privacy security Note: Windows NT uses all the settings. UNIX systems use only the settings 0, -1, and -2. See the Express Connection Editor Help system for information on these settings.
st	Server Type	:1: Express Server
ct	Connection Type	0: Express connection
sv	Server Version	1: Express 6.2 or greater

Default

None

Usage Notes

• You can have spaces in the string if necessary (for example, if the user ID is John Smith) because the entire string is enclosed in quotes.

• If a forward slash (/) is required in the string, then you must use another forward slash as an escape character. For example, if the domain were tools or reports, then the command line should be as follows:

  EXPRESS_SERVER="server=ncacn_ip_tcp:olap2-pc/sl=0/
  st=1/ct=0/sv=1/domain=tools//reports"
  
  

• You can use single quotes within the string. They are not treated specially because the entire string is enclosed in double quotes.

A.4.36 FORMSIZE

Table A-46 indicates which commands can use the FORMSIZE keyword.

Table A-46 Commands that can use FORMSIZE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use FORMSIZE to specify the size of the Runtime Parameter Form for the converted report in terms of the destination unit of measurement (specified using DUNIT).

Syntax

FORMSIZE=width x height

Values

width/height Any valid values in the specified unit of measurement.

Default

None

Usage Notes

• For non-character DUNITs, you can use a decimal to specify fractions (e.g., 8.5 x 11).

• For more information on the Runtime Parameter Form, see the PARAMFORM keyword.

A.4.37 FROM

Table A-47 indicates which commands can use the FROM keyword.

Table A-47 Commands that can use FROM

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use FROM to specify the e-mail address of the sender of an e-mail.

Syntax

FROM=emailid

Values

emailid Any valid e-mail address in the form [e-mail].

Default

loginid@machine_name

Usage Notes

Related keywords include BCC,CC, FROM, REPLYTO, and SUBJECT. Note that DESNAME is used to specify the main recipient(s) of the e-mail.

A.4.38 GETJOBID

Table A-48 indicates which commands can use the GETJOBID keyword.

Table A-48 Commands that can use GETJOBID

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use GETJOBID to retrieve the result output of the Reports Server job with job ID n.

Syntax

http://yourwebserver/reports/rwservlet/getjobidn[?][server=server_
name][&authid=username/password]

Values

See Syntax.

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• Job must be successfully finished and present in the Reports Server cache. Use SHOWJOBS to see the current list of jobs.

• Related keywords are SERVER and AUTHID.

A.4.39 GETSERVERINFO

Table A-49 indicates which commands can use the GETSERVERINFO keyword.

Table A-49 Commands that can use GETSERVERINFO

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	no	no

Description

Use GETSERVERINFO to display Reports Server information. You can choose the format (HTML or XML) in which the information is returned via &statusformat.

Syntax

http://yourwebserver/reports/rwservlet/getserverinfo[?][server=server_
name][&authid=username/password][&statusformat={html|xml}]

Values

See Syntax.

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• Related keywords are SERVER and AUTHID.

A.4.40 HELP

Table A-50 indicates which commands can use the HELP keyword.

Table A-50 Commands that can use HELP

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use HELP to display a help topic that lists the keywords you can use with the rwservlet command. For example:

http://yourwebserver/reports/rwservlet/help?command=keyword

Syntax

http://yourwebserver/reports/rwservlet/help

or

http://yourwebserver/reports/rwservlet/help?command=keyword

Values

See Syntax.

Default

None

A.4.41 INSTALL

Table A-51 indicates which commands can use the INSTALL keyword

Table A-51 Commands that can use INSTALL

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	no	no	yes

Description

Use INSTALL to configure an instance of the Reports Server on Microsoft Windows as a service. This keyword does not work on UNIX platforms.

Syntax

INSTALL reports_server_name

Values

reports_server_name A valid name for the Reports Server instance.

Default

None

Usage Notes

• If you use the AUTOSTART keyword with INSTALL, the Reports Server service will be started automatically after installation and whenever the system is restarted.

• If you use BATCH=YES with INSTALL, then none of the prompts and dialogs that normally display during installation will appear.

A.4.42 ITEMTITLE

Table A-52 indicates which commands can use the ITEMTITLE keyword.

Table A-52 Commands that can use ITEMTITLE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use ITEMTITLE to specify the display name Oracle9iAS Portal Release 1 should use for Oracle Reports output. The name will display in Oracle9iAS Portal Release 1 and link to Oracle Reports output.

Syntax

ITEMTITLE=title

Values

title Any text. Put quotation marks around the value if the value has any character spaces in it or you are specifying the option in the cgicmd.dat file.

Default

The report file name

Usage Notes

• Use of this keyword is optional to push

• Oracle Reports output to Oracle9iAS Portal Release 1.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.43 JOBNAME

Table A-53 indicates which commands can use the JOBNAME keyword.

Table A-53 Commands that can use JOBNAME

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	no	no	no	yes	yes	no

Description

Use JOBNAME to specify the name for a job to appear in Reports Queue Manager. It is treated as a comment and has nothing to do with running the job. If JOBNAME is not specified, then Reports Queue Manager shows the report name as the job name.

Syntax

JOBNAME=string

Values

Any job name.

Default

None

Usage Notes

JOBNAME can be used when running JSP-based Web reports from the command line.

A.4.44 JOBTYPE

Table A-54 indicates which commands can use the JOBTYPE keyword.

Table A-54 Commands that can use JOBTYPE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	no	no	no	yes	yes	no

Description

Use JOBTYPE to specify the type of job to be processed by the server. You can enter any type of job, as long as the Reports Server has an engine to process it.

Syntax

JOBTYPE=jobtype

Values

jobtype A job for which the Reports Server has an engine.

Default

REPORT

A.4.45 JVMOPTIONS

Table A-55 indicates which commands can use the JVMOPTIONS keyword.

Table A-55 Commands that can use JVMOPTIONS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	yes	yes	yes	no	no	yes

Description:

Use JVMOPTIONS to set options for either Reports Runtime, Reports Builder, Reports Converter, or Reports Server's Java Virtual Machine (JVM). For example, you could use the following command line to start the Reports Server with a 512Mb heap space:

rwserver server= servername jvmoptions=-Xmx512M

You could also use the following command line to start Reports Builder with a 512Mb heap space:

rwbuilder jvmoptions=-Xmx512M

Multiple options can be passed, in which case the options must be enclosed in quotes:

rwserver server= servername jvmoptions="-Xmx256M -Xms=128M"
rwbuilder jvmoptions="-Xmx256M -Xms=128M"

Syntax

JVMOPTIONS={options in the Reports Runtime, Reports Builder, Reports Converter, or Reports Server's JVM}

Default

-Xmx256M

Note: The value set using the jvmoptions keyword will override the value in the REPORTS_JVM_OPTIONS environment variable, if set.

A.4.46 KILLJOBID

Table A-56 indicates which commands can use the KILLJOBID keyword.

Table A-56 Commands that can use KILLJOBID

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use KILLJOBID to kill a Reports Server job with the specified job ID n.

Syntax

http://yourwebserver/reports/rwservlet/killjobidn[?][server=server_
name][&authid=username/password][&statusformat={html|xml|xmldtd}]

Values

See Syntax.

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• The job must be current (enqueued or scheduled).

• Use SHOWJOBS to see the current list of jobs. The STATUSFORMAT can be set to html (default), xml , or xmldtd to return status in that format. The status information is generated in html, xml, or xmldtd (with an internal dtd subset).

• Related keywords are SHOWJOBS,SERVER, AUTHID, and STATUSFORMAT.

• The STATUSFORMAT parameter is only valid for rwservlet, not for rwcgi.

A.4.47 LONGCHUNK

Table A-57 indicates which commands can use the LONGCHUNK keyword.

Table A-57 Commands that can use LONGCHUNK

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

LONGCHUNK is the size (in kilobytes) of the increments in which Reports Builder retrieves a LONG column value. When retrieving a LONG value, you might want to retrieve it in increments rather than all at once because of memory size restrictions. LONGCHUNK applies only to Oracle databases.

Syntax

LONGCHUNK=n

Values

n A number from 1 through 9999 (note that thousands are not expressed with any internal punctuation, e.g., a comma or a decimal point). For some operating systems, the upper limit might be lower.

Default

10

Usage Notes

LONGCHUNK can be used when running JSP-based Web reports from the command line.

A.4.48 MIMETYPE

Table A-58 indicates which commands can use the MIMETYPE keyword.

Table A-58 Commands that can use MIMETYPE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use MIMETYPE to override the MIME type assigned by the Reports Server when it returns output for the Web. In most cases, the default MIME type is correct, but, in cases where it is not, you can override it with this keyword. For example:

mimetype=application/vnd.ms-excel

Syntax

MIMETYPE=string

Values

string A valid MIME type specification.

Default

None

Usage Notes

OracleAS Reports Services does not verify the string you enter for MIMETYPE. You must ensure yourself that the string is correct for the returned report output.

A.4.49 MODE

Table A-59 indicates which commands can use the MODE keyword.

Table A-59 Commands that can use MODE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use MODE to specify whether to run the report in character mode or bitmap. This enables you to run a character-mode report from Reports Builder.

Syntax

MODE={BITMAP|CHARACTER|DEFAULT}

Values

The following values apply:

• BITMAP Run the report in bitmap mode.

• DEFAULT Run the report in the mode of the current executable being used.

• CHARACTER On Windows - the Reports Builder ASCII driver will be used to produce editable ASCII output.

Default

DEFAULT

A.4.50 MODULE|REPORT

Table A-60 indicates which commands can use the MODULE|REPORT keyword.

Table A-60 Commands that can use MODULE|REPORT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use MODULE or REPORT to specify the name of the report to run.

Syntax

REPORT|MODULE=runfile

Values

runfile Any valid runfile (that is, a file with an extension of .rep,.rdf,.jsp, or .xml).

Default

None

Usage Notes

• If you specify a character-mode report, Reports Builder displays a warning, then opens the report using a page size of 8.5" x 11" and a form size of 7" x 6".

• To run the report (e.g., display it in the Paper Design View), it must be a complete report definition (i.e., contain its own data model and layout definition). You cannot run a partial report definition.

• An XML report definition must have an .xml file extension when specified with the MODULE|REPORT keyword.

• If you do not enter a file extension, the executable searches first for a file with extension .rep, then extension .rdf, then .jsp, and then no extension, using the file path search order to find the file.

A.4.51 NONBLOCKSQL

Table A-61 indicates which commands can use the NONBLOCKSQL keyword.

Table A-61 Commands that can use NONBLOCKSQL

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use NONBLOCKSQL to specify whether to allow other programs to execute while data is fetched from the database.

Syntax

NONBLOCKSQL={YES|NO}

Values

• YES Other programs can execute while data is being fetched.

• NO Other programs cannot execute while data is being fetched.

Default

YES

Usage Notes

NONBLOCKSQL can be used when running JSP-based Web reports from the command line.

A.4.52 NOTIFYFAILURE

Table A-62 indicates which commands can use the NOTIFYFAILURE keyword.

Table A-62 Commands that can use NOTIFYFAILURE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use NOTIFYFAILURE to specify the recipient(s) of a notification e-mail should a report request fail. Use this keyword when you configure your Reports Server to use the notification class. For more information, see the notification discussion in Configuring OracleAS Reports Services.

Syntax

NOTIFYFAILURE=emailid|(emailid,emailid,...)

Values

emailid A valid e-mail address in the form [e-mail].

Default

None

Usage Notes

• The default notification e-mail templates that are used for the body of the notification e-mail are included with your installation of Oracle Application Server. The NOTIFYFAILURE template is named failnote.txt, and is located at ORACLE_HOME\reports\template.

• NOTIFYFAILURE can be used when running JSP-based Web reports from the command line.

A.4.53 NOTIFYSUCCESS

Table A-63 indicates which commands can use the NOTIFYSUCCESS keyword.

Table A-63 Commands that can use NOTIFYSUCCESS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use NOTIFYSUCCESS to specify the recipient(s) of a notification e-mail should a report request succeed. Use this keyword when you configure your Reports Server to use the notification class. For more information, see the notification discussion in Configuring OracleAS Reports Services.

Syntax

NOTIFYSUCCESS=emailid|(emailid,emailid,...)

Values

emailid A valid e-mail address in the form [e-mail].

Default

None

Usage Notes

• The default notification e-mail templates that are used for the body of the notification e-mail are included with your installation of Oracle Application Server. The NOTIFYSUCCESS template is named succnote.txt, and is located at ORACLE_HOME\reports\template.

• NOTIFYSUCCESS can be used when running JSP-based Web reports from the command line.

A.4.54 NUMBERFORMATMASK

Table A-64 indicates which commands can use the NUMBERFORMATMASK keyword.

Table A-64 Commands that can use NUMBERFORMATMASK

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use NUMBERFORMATMASK to specify how number values display in your delimited report output.

Syntax

NUMBERFORMATMASK=mask

Values

Any valid number format mask.

Default

None

Usage Notes

• This keyword can only be used if you have specified DESFORMAT=DELIMITED or DESFORMAT=DELIMITEDDATA.

  Note: For valid NUMBERFORMATMASK values see the Reports Builder online help topic, "Number Format Mask Syntax."

• NUMBERFORMATMASK can be used when running JSP-based Web reports from the command line.

A.4.55 OLAP_CON

Table A-65 indicates which commands can user the OLAP_CON keyword.

Table A-65 Commands that can use OLAP_CON

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

OLAP_CON specifies the Oracle OLAP (on-line analytical processing) connection string to connect to a database that contains multidimensional Oracle OLAP data.

Syntax

OLAP_CON=userid/password/hostname/SID/portnumber

Values

A valid OLAP connection string where:

• userid The user ID for connecting to Oracle OLAP.

• password The password for the user ID.

• hostname The host name for the database.

• SID The system identifier (SID) for connecting to the database.

• portnumber The port number for connecting to the database.

For example:

OLAP_Con="user1/secret1/mypc.us.oracle.com/mySID/9201

A.4.56 ONFAILURE

Table A-66 indicates which commands can use the ONFAILURE keyword.

Table A-66 Commands that can use ONFAILURE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use ONFAILURE to specify whether you want a COMMIT or ROLLBACK performed if an error occurs and the report fails to complete.

Syntax

ONFAILURE={COMMIT|ROLLBACK|NOACTION}

Values

• COMMIT Perform a COMMIT if the report fails.

• ROLLBACK Perform a ROLLBACK if the report fails.

• NOACTION Do nothing if the report fails.

Default

• ROLLBACK, if a USERID is provided.

• NOACTION, if called from an external source (for example, OracleAS Forms Services) with no USERID provided.

Usage Notes

• The COMMIT or ROLLBACK for ONFAILURE is performed after the report fails. Other COMMITs and ROLLBACKs can occur prior to this one. For more information, see the READONLY command.

• ONFAILURE can be used when running JSP-based Web reports from the command line.

A.4.57 ONSUCCESS

Table A-67 indicates which commands can use the ONSUCCESS keyword.

Table A-67 Commands that can use ONSUCCESS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use ONSUCCESS to specify that either a COMMIT or ROLLBACK should be performed when a report is finished running.

Syntax

ONSUCCESS={COMMIT|ROLLBACK|NOACTION}

Values

• COMMIT Perform a COMMIT when a report is done.

• ROLLBACK Perform a ROLLBACK when a report is done.

• NOACTION Do nothing when a report is done.

Default

• COMMIT, if a USERID is provided.

• NOACTION, if called from an external source (for example, OracleAS Forms Services) with no USERID provided.

Usage Notes

• The COMMIT or ROLLBACK for ONSUCCESS is performed after the after-report trigger fires. Other COMMITs and ROLLBACKs can occur prior to this one. For more information, see the READONLY command.

• ONSUCCESS can be used when running JSP-based Web reports from the command line.

A.4.58 ORIENTATION

Table A-68 indicates which commands can use the ORIENTATION keyword.

Table A-68 Commands that can use ORIENTATION

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

ORIENTATION controls the direction in which the pages of the report will print.

Syntax

ORIENTATION={DEFAULT|LANDSCAPE|PORTRAIT}

Values

DEFAULT Use the current printer setting for orientation.

LANDSCAPE Landscape orientation (long side at top and bottom).

PORTRAIT Portrait orientation (short side at top and bottom).

Default

DEFAULT

Usage Notes

• If ORIENTATION=LANDSCAPE for a character mode report, then you must ensure that your printer definition file contains a landscape clause.

• Not supported when output to a PCL printer on Motif.

A.4.59 OUTPUTFOLDER

Table A-69 indicates which commands can use the OUTPUTFOLDER keyword.

Table A-69 Commands that can use OUTPUTFOLDER

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use OUTPUTFOLDER to specify the name of the Oracle WebDB Release 2.2 or OracleAS Portal folder to push Oracle Reports output. This keyword is maintained for backward compatibility with Oracle WebDB Release 2.2 and Oracle9iAS Portal Release 1. Beginning with OracleAS Portal 10g (9.0.4), use OUTPUTPAGE.

Syntax

OUTPUTFOLDER=folder

Values

folder Any valid folder name (internal name) used in Oracle WebDB Release 2.2 or Oracle9iAS Portal Release 1.

Default

Oracle_Reports_Output

Usage Notes

• The value for this keyword is case sensitive.

• Use of this keyword is optional to push Oracle Reports output to Oracle WebDB Release 2.2 or Oracle9iAS Portal Release 1.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.60 OUTPUTIMAGEFORMAT

Table A-70 indicates which commands can use the OUTPUTIMAGEFORMAT keyword.

Table A-70 Commands that can use OUTPUTIMAGEFORMAT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use OUTPUTIMAGEFORMAT to choose the format for images in your report output.

Syntax

OUTPUTIMAGEFORMAT={PNG|JPEG|JPG|GIF|BMP}

Values

• PNG,JPEG,JPG Supported image formats when DESFORMAT value is PDF, HTML, HTMLCSS, or RTF

• GIF Supported image format when DESFORMAT value is PDF, HTML, or HTMLCSS

• BMP Supported image formats when DESFORMAT value is RTF

Usage Notes

• This command line keyword overrides the setting of the REPORTS_OUTPUTIMAGEFORMAT environment variable.

• This command line keyword is not supported if the REPORTS_DEFAULT_DISPLAY environment variable is explicitly set to NO (default is YES). In this case, image rendering defaults to GIF for HTML, HTMLCSS, and PDF output, and BMP for RTF output.

• You must ensure the format that you specify matches the output type. For example, BMP only works for RTF output. It will not work for HTML, HTMLCSS or PDF output.

Examples

Example 1

The following command lines generate PNG images with HTML output:

rwclient server=my_rep_server report=images.rdf destype=file desformat=html 
desname=images.html userid=user_id outputimageformat=PNG

rwrun report=images.rdf destype=file desformat=html desname=images.html 
userid=user_id outputimageformat=PNG

Similarly when DESFORMAT=pdf, images are embedded in PNG format in the generated PDF document.

Example 2

An error is displayed if an invalid value is specified for the OUTPUTIMAGEFORMAT. The following command lines generate an error message:

rwclient server=my_rep_server report=images.rdf destype=file desformat=html 
desname=images.html userid=user_id outputimageformat=ABCD

rwrun report=images.rdf destype=file desformat=html desname=images.html 
userid=user_id outputimageformat=ABCD

The invalid image format ABCD generates the following error message:

REP-35000: The image output format specified is not supported.

A.4.61 OUTPUTPAGE

Table A-71 indicates which commands can use the OUTPUTPAGE keyword.

Table A-71 Commands that can use OUTPUTPAGE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use OUTPUTPAGE to specify the name of the Oracle Reports page to push a report output information to. For backward compatibility with earlier versions (Oracle WebDB Release 2.2 and Oracle9iAS Portal Release 1), see OUTPUTFOLDER.

Syntax

OUTPUTPAGE=page

Values

page Any valid page name (internal name) used in Oracle9iAS Portal Release 1.

Default

Oracle_Reports_Output

Usage Notes

• Use of this keyword is optional to push Oracle Reports output to Oracle9iAS Portal Release 1:
  • If you do not specify an output page, OracleAS Portal will create a default page named Oracle_Reports_Output.

  • If you specify an output page, use the internal name and not the display name. The internal name is used to uniquely identify the OracleAS Portal component instance.

• The value for this keyword is case sensitive.

• The page should contain at least one item region when used with DESTYPE=ORACLEPORTAL.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.62 OVERWRITE

Table A-72 indicates which commands can use the OVERWRITE keyword.

Table A-72 Commands that can use OVERWRITE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use OVERWRITE to specify whether to overwrite existing files with the converted files.

Syntax

OVERWRITE={YES|NO|PROMPT}

Values

• YES Automatically overwrite any existing files of the same name.

• NO Do not to convert reports if there are existing files of the same name and display a warning message

• PROMPT Prompt you before overwriting any existing files.

Default

NO

A.4.63 P_AVAILABILITY

Table A-73 indicates which commands can use the P_AVAILABILITY keyword.

Table A-73 Commands that can use P_AVAILABILITY

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_AVAILABILITY to specify the name of the availability calendar that determines when the reports specified will be available for processing. This keyword is only used when DTYPE=REGISTER.

Syntax

P_AVAILABILITY=calendar_name

Values

calendar_name Any valid availability calendar name.

Default

None

Usage Notes

The availability calendar must exist in OracleAS Portal before running the SQL*PLUS script. If it does not, an invalid package may be created.

A.4.64 P_DESCRIPTION

Table A-74 indicates which commands can use the P_DESCRIPTION keyword.

Table A-74 Commands that can use P_DESCRIPTION

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_DESCRIPTION to specify the text that provides additional information about the report. This keyword is only used when DTYPE=REGISTER.

Syntax

P_DESCRIPTON=description_text

Values

description_text Any text string.

Default

None

A.4.65 P_FORMATS

Table A-75 indicates which commands can use the P_FORMATS keyword.

Table A-75 Commands that can use P_FORMATS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_FORMATS to specify the allowable destination formats for the specified reports. This keyword is only used when DTYPE=REGISTER.

Syntax

P_FORMATS=destination_format|(destination_format1,destination_format2,...)

Values

destination_format Any valid destination format (e.g., HTML), or a list of valid destination formats enclosed by parentheses with a comma separating the names (e.g., HTMLCSS,PDF,RTF).

Default

None

A.4.66 P_NAME

Table A-76 indicates which commands can use the P_NAME keyword.

Table A-76 Commands that can use P_NAME

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_NAME to specify the report name displayed in OracleAS Portal. This keyword is only used when DTYPE=REGISTER.

Syntax

P_NAME=report_name

Values

report_name Any report name.

Default

If P_NAME is not specified, the PL/SQL function is populated with the report definition file name.

Usage Notes

• If P_NAME is not specified, the PL/SQL function is populated with the report definition file name.

• Specify P_NAME only when you want to use the same report name for each report definition file being registered in OracleAS Portal. This option is typically left blank.

• The report name cannot be prefaced with numeric characters (e.g., 401K_ report is an invalid file name and my_401K_report is valid).

A.4.67 P_OWNER

Table A-77 indicates which commands can use the P_OWNER keyword.

Table A-77 Commands that can use P_OWNER

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_OWNER to specify the OracleAS Portal DB Provider that owns a report's package, which is created when the report definition files are registered. This keyword is only used when DTYPE=REGISTER.

Syntax

P_OWNER=portal_dbprovider

Values

portal_dbprovider Any valid OracleAS Portal DB Provider name.

Default

The name of the OracleAS Portal DB Provider to which you are connected when you run the SQL*PLUS script file.

A.4.68 P_PFORMTEMPLATE

Table A-78 indicates the commands that can use the P_PFORMTEMPLATE keyword.

Table A-78 Commands that can use P_PFORMTEMPLATE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_PFORMTEMPLATE to specify the name of the OracleAS Portal template that determines the style of the Runtime Parameter Form. This keyword is only used when DTYPE=REGISTER.

Syntax

P_PFORMTEMPLATE=template_name

Values

template_name Any valid OracleAS Portal template name.

Default

None

A.4.69 P_PRINTERS

Table A-79 indicates the commands that can use the P_PRINTERS keyword.

Table A-79 Commands that can use P_PRINTERS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_PRINTERS to specify the allowable printers for the specified reports. This keyword is only used when DTYPE=REGISTER.

Syntax

P_PRINTERS=printer_name

Values

printer_name Any valid printer (e.g., PRT1), or a list of valid printers enclosed by parentheses with a comma separating the names (e.g., (PRT1,PRT2,PRT3)).

Default

None

Usage Note

Access to the printer(s) should already exist in OracleAS Portal before running the SQL*Plus script.

A.4.70 P_PRIVILEGE

Table A-80 indicates which commands can use the P_PRIVILEGE keyword.

Table A-80 Commands that can use P_PRIVILEGE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_PRIVILEGE to specify the users or roles who have access privileges to run the specified reports. This keyword is only used when DTYPE=REGISTER.

Syntax

P_PRIVILEGE=user_name

Values

user_name Any user name or role that OracleAS Portal can recognize (e.g., SCOTT), or a list of user names or roles enclosed by parentheses with a comma separating the names (e.g., (SCOTT,JABERS,PMARTIN)).

Default

None

A.4.71 P_SERVERS

Table A-81 indicates which commands can use the P_SERVERS keyword.

Table A-81 Commands that can use P_SERVERS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_SERVERS to specify the names of the restricted Reports Servers that can run the report. This keyword is only used when DTYPE=REGISTER.

Syntax

P_SERVERS=tnsname

Values

tnsname Any valid TNS name of the Reports Server (e.g., repserver), or a list of valid Reports Server TNS names enclosed by parentheses with a comma separating the names (e.g., repserver, acct_server, sales_server).

Default

None

Usage Notes

Access to the Reports Server(s) should already exist in OracleAS Portal.

A.4.72 P_TRIGGER

Table A-82 indicates the commands that can use the P_TRIGGERS keyword.

Table A-82 Commands that can use P_TRIGGER

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_TRIGGER to specify the PL/SQL function that is executed when parameter values are specified on the command line and when users accept the Runtime Parameter Form. The function must return a boolean value (TRUE or FALSE). For example:

P_TRIGGER=Is begin IF UPPER(DESTYPE) = 'PRINTER' AND EMPNAME = 'SMITH' THEN 
RETURN(TRUE); ELSE RETURN(FALSE); END IF; end;

This keyword is only used when DTYPE=REGISTER.

Syntax

P_TRIGGER=plsql_function

Values

plsql_function Any valid PL/SQL function that returns a boolean value.

Default

None

A.4.73 P_TYPES

Table A-83 indicates which commands can use the P_TYPES keyword.

Table A-83 Commands that can use P_TYPES

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use P_TYPES to specify the allowable destination types for the specified reports. This keyword is only used when DTYPE=REGISTER.

Syntax

P_TYPES=destination_type

Values

destination_type Any valid destination type (e.g., CACHE), or a list of valid destination types enclosed by parentheses with a comma separating the names (e.g., CACHE,MAIL,PRINTER).

Default

None

A.4.74 PAGEGROUP

Table A-84 indicates which commands can use the PAGEGROUP keyword.

Table A-84 Commands that can use PAGEGROUP

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use PAGEGROUP to specify the name of the Oracle9iAS Portal Release 1 page group to which report output should be pushed. For backward compatibility with earlier versions, see SITENAME (for Oracle WebDB Release 2.2) and CONTENTAREA (for Oracle9iAS Portal Release 1). The page group must be created in Oracle9iAS Portal Release 1 before you can use this keyword.

Syntax

PAGEGROUP=pagegroup

Values

pagegroup Any valid page group name (internal name) used in Oracle9iAS Portal Release 1.

Default

None

Usage Notes

• Use of this keyword is required to push Oracle Reports output to Oracle9iAS Portal Release 1.

• The page group name should be the internal name and not the display name. The internal name is used to uniquely identify the Oracle9iAS Portal Release 1 page instance.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.75 PAGESIZE

Table A-85 indicates which commands can use the PAGESIZE keyword.

Table A-85 Commands that can use PAGESIZE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	yes	yes	yes	no

Description

Use PAGESIZE to set the dimensions of the physical page (that is, the size of the page that the printer outputs). The page must be large enough to contain the report. For example, if a frame in a report expands to a size larger than the page dimensions, then the report is not run.

Syntax

PAGESIZE=width x height

Values

Any valid page dimensions of the form: page width x page height, where page width and page height are more than zero. The maximum width and height depends which unit of measurement was set in Reports Builder (Edit > Preferences > General tab). For inches, the maximum width and height is 512 inches. For centimeters, it is 1312 centimeters. For picas, it is 36,864 picas.

Default

For bitmap, 8.5 x 11 inches. For character mode, 80 x 66 characters. If the report was designed for character mode and is being run or converted on bitmap, then the following formula is used to determine page size if none is specified: (default page size * character page size)/default character page size. For example, if the character page size is 80 x 20, then the bit-mapped page size would be:
( (8.5 * 80)/80) x ((11 * 20)/66) = (680/80) x (220/66) = 8.5 x 3.33.

Usage Notes

• On some printers the printable area of the physical page is restricted. For example, the sheet of paper a printer takes might be 8.5 x 11 inches, but the printer might only be able to print on an area of 8 x 10.5 inches. If you define a page width x page height in Reports Builder that is bigger than the printable area your printer allows, then clipping might occur in your report output. To avoid clipping, you can either increase the printable area for the printer (if your operating system allows it), or you can set the page width x page height to be the size of the printable area of the page.

• Letter size is 8.5 inches x 11 inches. A4 size is 210mm x 297mm, or 8.25 inches x 11.75 inches.

• If you use the PAGESIZE keyword, then its value overrides the page dimensions of the report definition.

• A PAGESIZE value entered on the Runtime Parameter Form overrides any PAGESIZE value entered on the command line.

A.4.76 PAGESTREAM

Table A-86 indicates which commands can use the PAGESTREAM keyword.

Table A-86 Commands that can use PAGESTREAM

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

PAGESTREAM enables or disables page streaming (pagination) for the report when formatted as HTML or HTMLCSS output, using the navigation controls set by either of the following:

• The Page Navigation Control Type and Page Navigation Control Value properties in the Report Property Palette.

• PL/SQL in a Before Report trigger (SRW.SET_PAGE_NAVIGATION_HTML)

Syntax

PAGESTREAM={YES|NO}

Values

• YES Paginate the report output.

• NO Output the report without pagination.

Default

NO

A.4.77 PARAMFORM

Table A-87 indicates which commands can use the PARAMFORM keyword.

Table A-87 Commands that can use PARAMFORM

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use PARAMFORM to specify whether to display the Runtime Parameter Form when you execute a report via CGI or a servlet. PARAMFORM is used only to supply parameters to paper layout reports, not Web source reports.

Syntax

PARAMFORM=YES|NO|HTML

Values

• YES Display the Parameter Form.

• NO Do not display the Parameter Form.

• HTML Display the Parameter Form in HTML format.

Default

NO

Usage Notes

• PARAMFORM=YES is incompatible with BATCH=YES because it is not meaningful to have the Runtime Parameter Form appear in batch mode.

• Do not use this keyword when running a report in an OracleAS Portal environment. This is because OracleAS Portal allows you to set up a Reports runtime parameter form, which may conflict with a form you specify with the PARAMFORM keyword.

A.4.78 PARSEQUERY

Table A-88 indicates which commands can use the PARSEQUERY keyword.

Table A-88 Commands that can use PARSEQUERY

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use PARSEQUERY to parse an rwservlet query and display the constructed Reports Server command line.

Syntax

http://yourwebserver/reports/rwservlet/parsequery[?][server=servername][&authid=
username/password]

Values

See Syntax.

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• Related keywords are SERVER and AUTHID.

A.4.79 PDFCOMP

Table A-89 indicates which commands can use the PDFCOMP keyword.

Table A-89 Commands that can use PDFCOMP

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use PDFCOMP to specify whether PDF output should be compressed.

Syntax

PDFCOMP=value|{YES|NO}

Values

• value Any value 0 though 9. A value of 0 means PDF output will not be compressed. A value of 1 through 9 will compress the PDF output and permit users to control the compression level.

• YES Compresses output at compression level 6.

• NO Compresses output at compression level 0 (no compression).

Default

6

A.4.80 PDFEMBED

Table A-90 indicates which commands can use the PDFEMBED keyword.

Table A-90 Commands that can use PDFEMBED

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use PDFEMBED to specify whether Oracle Reports will embed the Type1 PostScript font file(s) specified in the uifont.ali file into PDF output.

Syntax

PDFEMBED={YES|NO}

Values

• YES The PDF driver will embed the font(s) specified in the [PDF:Embed] header of the uifont.ali file into the PDF output.

• NO The font(s) will not be added to PDF output.

Default

YES

A.4.81 PRINTJOB

Table A-91 indicates which commands can use the PRINTJOB keyword.

Table A-91 Commands that can use PRINTJOB

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	yes	no	no	no	no

Description

Use PRINTJOB to specify whether the Print Job dialog box should be displayed before running a report.

Syntax

PRINTJOB={YES|NO}

Values

• YES The Print Job dialog box is displayed before the report is run.

• NO The report is run without displaying the Print Job dialog box.

Default

NO

Usage Notes

• When a report is run as a spawned process (that is, one executable, such as rwrun, is called from within another executable, such as rwbuilder), the Print Job dialog box does not appear, regardless of PRINTJOB.

• When DESTYPE=MAIL, the Print Job dialog box does not appear, regardless of PRINTJOB.

A.4.82 READONLY

Table A-92 indicates which commands can use the READONLY keyword.

Table A-92 Commands that can use READONLY

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use READONLY to request read consistency across multiple queries in a report. When accessing data from Oracle 9i, read consistency is accomplished by a SET TRANSACTION READ ONLY statement.

Note: Refer to Oracle9i SQL documentation (available on the Oracle Technology Network, (http://otn.oracle.com) for more information on SET TRANSACTION READ ONLY.

Syntax

READONLY={YES|NO}

Values

YES Requests read consistency.

NO Do not provide read consistency.

Default

NO

Usage Notes

• This keyword is only useful for reports using multiple queries. Oracle 9i automatically provides read consistency, without locking, for single query reports.

• In the Report trigger order of execution, SET TRANSACTION READ ONLY must be set up before the data fetch occurs.

• READONLY can be used when running JSP-based Web reports from the command line.

A.4.83 RECURSIVE_LOAD

Table A-93 indicates which commands can use the RECURSIVE_LOAD keyword.

Table A-93 Commands that can use RECURSIVE_LOAD

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	yes	yes	yes	no

Description

Use RECURSIVE_LOAD to specify whether to validate external references in program units when running a report. If any of the references become invalid, the program unit is automatically recompiled. Setting RECURSIVE_LOAD to NO is useful when running your report against a different database than the one against which its PL/SQL was originally compiled.

Syntax

RECURSIVE_LOAD={YES|NO}

Values

• YES Validates external references when running a report. If any of the references become invalid, the program unit is recompiled (whether it be in .rdf or .pll).

• NO Does not validate external references when running a report. This setting is useful when running a report against a different database than the one against which its PL/SQL was originally compiled.

Default

YES

A.4.84 REPLACEITEM

Table A-94 indicates which commands can use the REPLACEITEM keyword.

Table A-94 Commands that can use REPLACEITEM

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use REPLACEITEM to specify that the current report output being pushed to Oracle9iAS Portal Release 1 should replace an earlier version of the same item stored in the same output target.

Syntax

REPLACEITEM={YES|NO}

Values

• YES Earlier report output should be replaced.

• NO Do not replace previous version. In this case, a link to the new output will be added to a list of links to previous versions of the same report.

Default

None

Usage Notes

• Use of this keyword is optional to push Oracle Reports output to Oracle9iAS Portal Release 1.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.85 REPLYTO

Table A-95 indicates which commands can use the REPLYTO keyword.

Table A-95 Commands that can use REPLYTO

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use REPLYTO to specify the e-mail address to which replies should be sent when the sender wants replies to go to someone other than the sender (specified by the FROM keyword).

Syntax

REPLYTO=emailid

Values

emailid A valid e-mail address in the form of [e-mail].

Default

None

Usage Notes

Related keywords include BCC,CC,FROM,REPLYTO, and SUBJECT. Note that DESNAME is used to specify the main recipient(s) of the e-mail.

A.4.86 REPORT|MODULE

See MODULE|REPORT.

A.4.87 ROLE

Table A-96 indicates which commands can use the ROLE keyword.

Table A-96 Commands that can use ROLE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use ROLE to specify the database role to be checked for the report at runtime. This keyword is useful for giving you the ability to run reports that query database tables to which you would not normally have access privileges.

Syntax

ROLE={rolename[/rolepassword]}

Values

• rolename A valid role.

• rolepassword (Optional) The matching role password.

Default

None

Usage Notes

ROLE can be used when running JSP-based Web reports from the command line.

A.4.88 RUNDEBUG

Table A-97 indicates which commands can use the RUNDEBUG keyword.

Table A-97 Commands that can use RUNDEBUG

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use RUNDEBUG to specify that you want extra runtime checking for logical errors in the report. RUNDEBUG checks for things that are not errors but might result in undesirable output, and displays these as warnings at runtime, before displaying the report output. Using RUNDEBUG to run a report in debug mode is not the same as debugging a report using the PL/SQL Interpreter.

RUNDEBUG checks for the following:

• Frames or repeating frames that overlap but do not enclose another object. This can lead to objects overwriting other objects in the output.

• Layout objects with page-dependent references that do not have fixed sizing. Such objects will be fixed in size regardless of the Vertical Elasticity and Horizontal Elasticity property settings.

• Bind variables referenced at the wrong frequency in PL/SQL.

Syntax

RUNDEBUG={YES|NO}

Values

• YES Perform extra runtime error checking.

• NO Do not perform extra runtime error checking.

Default

YES

Usage Notes

RUNDEBUG can be used when running JSP-based Web reports from the command line.

A.4.89 SAVE_RDF

Table A-98 indicates which commands can use the SAVE_RDF keyword.

Table A-98 Commands that can use SAVE_RDF

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	yes	yes	no	no	no	no

Description

Use SAVE_RDF to specify a filename for a combined RDF file and XML customization file. This keyword is useful when you combine an existing RDF file with a Oracle Reports XML customization file using the CUSTOMIZE keyword, and you wish to save the combination to a new RDF file.

Syntax

SAVE_RDF=filename.rdf

Values

filename.rdf Any valid file name.

Default

None

Usage Notes

You can use SAVE_RDF with a JSP file, but only the paper layout part, not the Web source.

A.4.90 SCHEDULE

Table A-99 indicates which commands can use the SCHEDULE keyword.

Table A-99 Commands that can use SCHEDULE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	no	no	no	yes	yes	no

Description

Use SCHEDULE to set the day, time, and frequency a report should be run. The default is to run the report once, now. Time values are expressed according to a 24-hour day (i.e., one o'clock is expressed 13:00). To eliminate the need for quoting the scheduling command, use underscores (_) instead of spaces. You can also specify an expiration for a report job after a number of runs or on a particular date/time. For example, use:

SCHEDULE=every_first_fri_of_month_from_15:53_Oct_23,_1999_retry_3_after_1_hour_
expires_on_15:53_Oct_23,_2003
SCHEDULE=last_weekday_before_15_from_15:53_Oct_23,_1999_retry_after_1_hour_
expires_after_100

Or:

SCHEDULE="every first fri of month from 15:53 Oct 23, 1999 retry 3 after 1 hour 
expires on 15:53 Oct 23, 2003"
SCHEDULE="last weekday before 15 from 15:53 Oct 23, 1999 retry after 1 hour 
expires after 100"

Syntax

SCHEDULE=string

where the string is:

[FREQ from] TIME [retry {n} after LEN expires {on|after} time|n]

Table A-100 lists and explains the values used in this string.

Table A-100 Values for string used with the SCHEDULE keyword

FREQ	hourly | daily | weekly | monthly | {every {LEN | DAYREPEAT}} | {last {WEEKDAYS | weekday | weekend} before {n}+}
LEN	{n}+ {minute[s] | hour[s] | day[s] | week[s] | month[s]}
DAYREPEAT	{first | second | third | fourth | fifth} WEEKDAYS of month
WEEKDAYS	mon | tue | wed | thu | fri | sat | sun
TIME	now | CLOCK [DATE]
CLOCK	h:m | h:mm | hh:m | hh:mm
DATE	today | tomorrow | {MONTHS {d | dd} [,year]}
MONTHS	jan | feb | mar | apr | may | jun | jul | aug | sep | oct | nov | dec
EXPIRES	on {today | tomorrow | {MONTHS {d | dd} [,year]}}|after n

Default

None

A.4.91 SERVER

Table A-101 indicates which commands can use the SERVER keyword.

Table A-101 Commands that can use SERVER

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	no	no	no	yes	yes	yes

Description

Use SERVER to specify the name of the Reports Server you want to use to run this report.

Syntax

SERVER=servername

Values

The server name or a TNS service entry name if you're using a 6i compatible server.

Default

The server name specified in the REPORTS_SERVER environment variable for rwcgi.

Usage Notes

• For jobs run with rwcgi, you can set the REPORTS_SERVER environment variable on your Web server machine and omit the SERVER keyword to process requests using the default server, or you can include the SERVER keyword to override the default. For jobs run with rwservlet or as a JSP, you can omit the SERVER keyword if you have specified a default server in the servlet configuration file, rwservlet.properties; or you can include the SERVER keyword to override the default.

• SERVER can be used when running JSP-based Web reports from the command line.

A.4.92 SHOWAUTH

Table A-102 indicates which commands can use the SHOWAUTH keyword.

Table A-102 Commands that can use SHOWAUTH

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use SHOWAUTH to display the Reports Server logon page and runs the report .

Syntax

http://yourwebserver/reports/rwservlet/showauth[?][server=servername][&authid=us
ername/password]][&nextpage=run report URL][&authtype={s|d}]

Values

See Syntax.

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• When authtype=s the Reports System User Authentication dialog box is displayed. The Reports Database User Authentication dialog box is displayed when authtype=d.

• Related keywords are SERVER and AUTHID.

A.4.93 SHOWENV

Table A-103 indicates which commands can use the SHOWENV keyword.

Table A-103 Commands that can use SHOWENV

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use SHOWENV to display the rwservlet configuration file (rwservlet.properties).

Syntax

http://yourwebserver/reports/rwservlet/showenv[?][server=servername][&authid=use
rname/password]

Values

See Syntax.

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• Related keywords are SERVER and AUTHID.

A.4.94 SHOWJOBID

Table A-104 indicates which commands can use the SHOWJOBID keyword.

Table A-104 Commands that can use SHOWJOBID

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	no	no

Description

SHOWJOBID shows the status of the Reports Server job with job ID n.

Syntax

http://yourwebserver/reports/rwservlet/showjobidn[?][server=server_
name][&authid=username/password][&statusformat={html|xml|xmldtd}]

Values

See Syntax.

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• The job must be current (enqueued or scheduled).

• Use SHOWJOBS to see the current list of jobs. The STATUSFORMAT can be set to html (default), xml , or xmldtd to return status in that format. The status information is generated in html, xml, or xmldtd (with an internal dtd subset).

• Related keywords are SHOWJOBS,SERVER, AUTHID, and STATUSFORMAT.

• The STATUSFORMAT parameter is only valid for rwservlet, not for rwcgi.

A.4.95 SHOWJOBS

Table A-105 indicates which commands can use the SHOWJOBS keyword.

Table A-105 Commands that can use SHOWJOBS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use SHOWJOBS to display a Web view of Reports Server queue status.

Syntax

http://yourwebserver/reports/rwservlet/showjobs[n][?][server=server_
name][&authid=username/password][&queuetype=current | past |
future][&startrow=start_position_in_job_queue][&count=number_of_jobs_to_
display][&statusformat={html|xml|xmldtd}]

Values:

See Syntax

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• The name of the Reports Server must be specified implicitly by environment variable or servlet configuration file, or explicitly in the URL request. The refresh number n is optional. When it is specified, the report's queue status will be updated every n seconds.

• The STATUSFORMAT can be set to html (default), xml , or xmldtd to return status in that format. The status information is generated in html, xml, or xmldtd (with an internal dtd subset).

• The QUEUETYPE,STARTROW,COUNT, and STATUSFORMAT parameters are valid only for rwservlet and not for rwcgi.

• Related keywords are SERVER, AUTHID, and STATUSFORMAT.

A.4.96 SHOWMAP

Table A-106 indicates which commands can use the SHOWMAP keyword.

Table A-106 Commands that can use SHOWMAP

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	yes	no

Description

Use SHOWMAP to display rwservlet key mappings.

Syntax

http://yourwebserver/reports/rwservlet/showmap[?][server=servername][&authid=use
rname/password]

Values

See Syntax.

Default

None

Usage Notes:

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• Related keywords are SERVER and AUTHID.

A.4.97 SHOWMYJOBS

Table A-107 indicates which commands can use the SHOWMYJOBS keyword.

Table A-107 Commands that can use SHOWMYJOBS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	no	no

Description

Use SHOWMYJOBS to display the Reports Server queue status for a particular user.

Syntax

http://yourwebserver/reports/rwservlet/showmyjobs[?][server=server_
name][&authid=username/password][&statusformat={html|xml|xmldtd}]

Values

See Syntax.

Default

None

Usage Notes

• This keyword is a command that does not require a value; i.e., commands are entered by themselves without a corresponding value.

• The STATUSFORMAT can be set to html (default), xml , or xmldtd to return status in that format. The status information is generated in html, xml, or xmldtd (with an internal dtd subset).

• Related keywords are SERVER, AUTHID, and STATUSFORMAT.

• The STATUSFORMAT parameter is only valid for rwservlet, not for rwcgi.

A.4.98 SHUTDOWN

Table A-108 indicates which commands can use the SHUTDOWN keyword.

Table A-108 Commands that can use SHUTDOWN

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	no	no	yes

Description

Use SHUTDOWN to shut down a previously running server. You must also use AUTHID to supply a user name and password.

Syntax

SHUTDOWN={NORMAL|IMMEDIATE}

Values

NORMAL or IMMEDIATE

Default

NORMAL

Usage Notes

The user of the SHUTDOWN keyword must be an Oracle Reports Administrative user. If the server has security enabled, it will query the security API to determine the user's role eligibility to execute the shutdown (in other words, the user must be an Oracle Reports Administrative user). If security is not enabled, then the user must nonetheless be an Oracle Reports Administrative user defined for that server.

A.4.99 SITENAME

Table A-109 indicates which commands can use the SITENAME keyword.

Table A-109 Commands that can use SITENAME

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use SITENAME to specify the name of the WebDB site to push a report's output to. This keyword is maintained for backward compatibility with Oracle WebDB Release 2.2; for backward compatibility with Oracle9iAS Portal Release 1, see CONTENTAREA. Beginning with OracleAS Portal Release 2, use PAGEGROUP.

Syntax

SITENAME=name

Values

name Any valid site name used in Oracle WebDB Release 2.2.

Default

None

Usage Notes

• Use of this keyword is required to push Oracle Reports output to Oracle9iAS Portal Release 1.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.100 SOURCE

Table A-110 indicates which commands can use the SOURCE keyword.

Table A-110 Commands that can use SOURCE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use SOURCE to specify the report/library or list of reports/libraries to be converted. The rwconverter command requires that you specify a source report or library.

Syntax

SOURCE={source_name|(source_name1, source_name2, ...)}

Values

Any valid report/library name or filename, or a list of valid report/library names or filenames enclosed in parentheses and separated by commas (e.g., (qanda, test, dmast)).

Default

None

Usage Notes

• SQL wildcard characters (% and _) may be used for reports or libraries that are stored in the database. For example, R% would fetch all reports stored in the database that begin with R. All reports that match will be converted.

• A list of report/library names or filenames must be enclosed in parentheses, with commas separating the names. For example:

  (qanda,test,dmast) OR (qanda, test, dmast)
  
  

• Wildcard characters are invalid for reports/libraries stored in files (i.e., with extensions of rdf, rep, rex, pld, pll, or xml).

• The value(s) for the SOURCE keyword may be operating system-specific.

• If you are using user-owned Reports Builder tables, reports/libraries from multiple users must be converted for each user individually.

• To convert reports/libraries, you must have created them or been granted access to the ones you did not create. If no userid is prefixed to the report/library name, the userid is assumed to be the current user.

• When DTYPE=REGISTER, you may only want to list report definition files with common parameters, such as destination types and formats, user access, and availability calendars.

A.4.101 SQLTRACE

Table A-111 indicates which commands can use the SQLTRACE keyword.

Table A-111 Commands that can use SQL_TRACE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use SQLTRACE to specify whether to perform SQL tracing on your report without modifying the report definition.

Syntax

SQLTRACE=[YES|NO]

Values

• YES SQL tracing will be performed on the report.

• NO SQL tracing will not be performed on the report.

Default

NO

A.4.102 SSOCONN

Table A-112 indicates which commands can use the SSOCONN keyword.

Table A-112 Commands that can use SSOCONN

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	no	no

Description

Use SSOCONN to specify one or more connect strings to use to connect to one or more data sources in a Single Sign-On environment.

Syntax

SSOCONN=key[/type[/conn_str]][,key[/type[/conn_str]]]

For example:

ssoconn=mykey/OracleDB/userid

Values

The following information describes the variable values expressed in the SSOCONN syntax:

• key refers to a connection string value stored in the Oracle Internet Directory (OID).

• type is a predefined character string that specifies a Reports data source type. Types provided with your Oracle Application Server installation include OracleDB, JDBCPDS (Java Database Connectivity Pluggable Data Source), and ExpressPDS (Oracle Express Pluggable Data Source).

• conn_str is the name of the connection string parameter that rwservlet will compose to run the report

Default

None

Usage Notes

• If multiple data sources are used in the report, use a comma to separate data source connection strings. For example:

  ssoconn=key1/type1/conn_str,key2/type2/conn_str2,key3/type3/conn_str3
  

• Simplified versions of the SSOCONN option are also available. Table A-113 provides examples.

• When you use SSOCONN in a command line, you cannot:
  • Specify authid in the same command line.

  • Run against a Reports Server that is not secure.

  • Have SINGLESIGNON set to NO in rwservlet.properties.

  Doing any of the above with SSOCONN in the command line results in an error.

  Table A-113 Simplified versions of the SSOCONN option

  option	Description
  ssoconn=mkey	When only the key name is specified, the default type (Oracle DB) will be used, and the connect parameter is the USERID keyword.
  ssoconn=mkey/PDSApp	When both key name and application type are specified, the connection parameter is the USERID keyword.
  ssoconn=mkey/PDSApp/P_1	When everything is specified, the specified values are used.

• SSOCONN can be used when running JSP-based Web reports from the command line. If you are using the SSOCONN keyword with a report run as a JSP, use an ampersand(&) to separate connection strings. For example:

  http://...:8888/myjsp/foo.jsp?name1=value1&name2=value2 ...
  

  Note: For more information about Oracle Reports and Single Sign-On (SSO), see Configuring and Administering OracleAS Single Sign-On.

A.4.103 STATUSFOLDER

Table A-114 indicates which commands can use the STATUSFOLDER keyword.

Table A-114 Commands that can use STATUSFOLDER

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use STATUSFOLDER to specify the name of the Oracle WebDB Release 2.2 or Oracle9iAS Portal Release 1 folder to push status information into. If this is omitted, a new folder is created called Oracle_Reports_Status. This keyword is maintained for backward compatibility with Oracle WebDB Release 2.2 and Oracle9iAS Portal Release 1. Beginning with OracleAS Portal Release 2, use STATUSPAGE.

Syntax

STATUSFOLDER=folder

Values

folder Any valid folder name (internal name) used in Oracle WebDB Release 2.2 or Oracle9iAS Portal Release 1.

Default

Oracle_Reports_Status

Usage Notes

• Use of this keyword is optional to push Oracle Reports output to Oracle WebDB Release 2.2 or Oracle9iAS Portal Release 1.

• The value for this keyword is case sensitive.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.104 STATUSFORMAT

Table A-115 indicates which commands can use the STATUSFORMAT keyword.

Table A-115 Commands that can use STATUSFORMAT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	yes	no	no

Description

Use STATUSFORMAT to specify the format for the Web view of Reports Server queue status.

Syntax

http://yourwebserver/rwservlet/showjobs?server=server_name&statusformat={html|xml|xmldtd}

Values

• HTML Specify that the Reports queue status output should be in HTML format.

• XML Specify that it should be in XML format.

• XMLDTD Specify that it should be in XML format with in-line Data Type Definition information.

Default

HTML

Usage Notes

Use STATUSFORMAT in conjunction with the SHOWJOBS and SHOWMYJOBS keywords.

A.4.105 STATUSPAGE

Table A-116 indicates which commands can use the STATUSPAGE keyword.

Table A-116 Commands that can use STATUSPAGE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use STATUSPAGE to specify the name of the Oracle9iAS Portal Release 1 page to push job status information into. If this is omitted, a new page is created called Oracle_Reports_Status. For backward compatibility with earlier versions (Oracle WebDB Release 2.2 and Oracle9iAS Portal Release 1), see STATUSFOLDER.

Syntax

STATUSPAGE=page

Values

page Any valid page name (internal name) used in Oracle9iAS Portal Release 1.

Default

Oracle_Reports_Status

Usage Notes

• Use of this keyword is optional to push Oracle Reports output to Oracle9iAS Portal Release 1.

• The value for this keyword is case sensitive.

• Relevant keywords include CONTENTAREA*, EXPIREDAYS, ITEMTITLE, OUTPUTFOLDER*, OUTPUTPAGE, PAGEGROUP, REPLACEITEM, SITENAME*, STATUSFOLDER*, STATUSPAGE.

  * maintained for backward compatibility with Oracle9iAS Portal Release 1 and/or Oracle WebDB Release 2.2.

A.4.106 STYPE

Table A-117 indicates which commands can use the STYPE keyword.

Table A-117 Commands that can use STYPE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use STYPE to specify the format of the report(s) or libraries to be converted.

Syntax

STYPE={PLDFILE|PLLFILE|RDFFILE|REXFILE|XMLFILE|JSPFILE}

Values

Use any one of the following values:

• PLDFILE Source PL/SQL libraries are stored in files in ASCII format.

• PLLFILE Source PL/SQL libraries are stored in files containing source code and P-code (compiled PL/SQL).

• RDFFILE Source report(s) are stored in one or more report definition files (files with the rdf extension).

• REXFILE Source report(s) are stored in one or more text files (files with the rex extension).

• XMLFILE Source report(s) are stored in one or more XML files.

• JSPFILE Source report(s) are stored in one or more JSP files.

Default

RDFFILE

Usage Notes

When DTYPE=REGISTER, choose RDDFILE,REXFILE,XML, or JSPFILE for STYPE.

A.4.107 SUBJECT

Table A-118 indicates which commands can use the SUBJECT keyword.

Table A-118 Commands that can use SUBJECT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	no	no	yes	yes	no

Description

Use SUBJECT to specify the subject line of an e-mail.

Syntax

SUBJECT=any text

Values

Any text.

Default

None

Usage Notes

• Enclose subjects that contain character spaces in quotation marks (" "). Single-word subjects do not require quotation marks.

• Related keywords include BCC, CC, FROM, REPLYTO, and SUBJECT. Note that DESNAME is used to specify the main recipient(s) of the e-mail.

A.4.108 SUPPRESSLAYOUT

Table A-119 indicates which commands can use the SUPPRESSLAYOUT keyword.

Table A-119 Commands that can use SUPPRESSLAYOUT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

Use SUPPRESSLAYOUT to specify whether to suppress the formatting of the paper layout at runtime. The keyword allows users to control whether the paper layout in a report is executed at runtime. The most common use of this keyword is to increase the performance of JSP reports. Since a JSP report may have a paper layout and reference objects in it via an <rw:include> tag, Oracle Reports formats the paper layout before running the JSP section of the report. To improve the performance of single source JSP reports that store both paper and Web layouts but do not reference paper layout objects, set SUPPRESSLAYOUT=YES on the command line.

Note: If there is an <rw:include> tag, then no output will be created for the tag.

Syntax

SUPPRESSLAYOUT=[YES|NO]

Values

• YES Paper layout objects will not be formatted at runtime

• NO Paper layout objects will be formatted at runtime.

Default

NO

A.4.109 TOLERANCE

Table A-120 indicates which commands can be used with the TOLERANCE keyword.

Table A-120 Commands that can use TOLERANCE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	no	no	no	yes	yes	no

Description

Use TOLERANCE to set the maximum acceptable time (in minutes) for reusing a report's cached output when a duplicate job is detected. Setting the time tolerance on a report reduces the processing time when duplicate jobs are found.

See Reusing Report Output from Cache for more information on duplicate job detection.

Syntax

TOLERANCE=time_string

Values

time_string Can be in one of two formats:

• n{unit}, for a number with an optional unit. The unit can be minute(s), hour(s), or day(s). The default unit is minute(s) if no unit is specified.

• {Mon DD, YYYY} hh:mi:ss am|pm {timezone}, for a date/time format. Date information is optional. If it isn't specified, today is assumed. Time zone is also optional. If it isn't specified, the Reports Server's timezone is used. The date/time is always in a US locale. This format is the same as defined in the Java DateFormat.MEDIUM type.

Default

None

Usage Notes

• If TOLERANCE is not specified, then OracleAS Reports Services reruns the report even if a duplicate report is found in the cache.

• If a report is being processed (that is, in the current job queue) when an identical job is submitted, then OracleAS Reports Services reuses the output of the currently running job even if TOLERANCE is not specified or is set to zero.

A.4.110 TRACEFILE

Table A-121 indicates which commands can use the TRACEFILE keyword.

Table A-121 Commands that can use TRACEFILE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	no	no	no

Description

TRACEFILE is the name of the file in which trace information is logged.

Note: See Report Trace for additional information about how tracing works with Oracle Reports.

Syntax

TRACEFILE=tracefile

Values

Any valid file name.

Default

None

Usage Notes

• In a runtime environment, or when you are monitoring Reports Services components, you can use all three TRACE keywords. But for server security, in a server environment you can use only TRACEOPTS. This is to prevent files from being written arbitrarily to the Reports Server's file system.

• Tracing for the Reports Server is configured in the server configuration file, server_name.conf (see Configuring OracleAS Reports Services). Tracing for the Reports Servlet is configured in the servlet configuration file, rwservlet.properties (see Configuring OracleAS Reports Services). Tracing for individual jobs is specified from the runtime command line, via the TRACEOPTS command line option.

• Whether an existing file will be overwritten or appended to depends on the TRACEMODE setting.

• Trace information can only be generated when running a .rdf file. You cannot specify logging when running a .rep file.

• If you specify TRACEOPTS=TRACELOG or TRACEOPTS=TRACEERR as well as TRACEFILE, all of the trace information will be placed in the most recently specified file. For example, in the following case, all of the specified trace information would be placed in err.log because it is the last file specified in the RWRUN command.

  RWRUN MODULE=order_entry USERID=scott/tiger
  TRACEFILE=trace.log LOGFILE=mylog.log
  ERRFILE=err.log
  

A.4.111 TRACEMODE

Table A-122 indicates which commands can use the TRACEMODE keyword.

Table A-122 Commands that can use TRACEMODE

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	no

Description

TRACEMODE specifies whether to append new trace information to existing information in the file specified by TRACEFILE, or overwrite the entire file.

Syntax

TRACEMODE={TRACE_APPEND|TRACE_REPLACE}

Values

• TRACE_APPEND Adds the new information to the end of the file.

• TRACE_REPLACE Overwrites the file.

Default

TRACE_APPEND

Usage Notes

• In a runtime environment, or when you are monitoring Reports Services components, you can use all three TRACE keywords. But for server security, in a server environment you can use only TRACEOPTS. This is to prevent files from being written to the server.

• Tracing for the Reports Server is configured in the server configuration file, server_name.conf. Tracing for the Reports Servlet is configured in the servlet configuration file, rwservlet.properties. Tracing for individual jobs is specified from the runtime command line, via the TRACE command line arguments. See Report Trace for additional information about how tracing works with Oracle Reports.

• Trace information can only be generated when running a .rdf file. You cannot specify logging when running a .rep file.

A.4.112 TRACEOPTS

Table A-123 indicates which commands can use the TRACEOPTS keyword.

Table A-123 Commands that can use TRACEOPTS

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	no	yes	yes	yes

Description

TRACEOPTS indicates the tracing information that you want to be logged in the trace file when you run the report.

Syntax

TRACEOPTS={TRACE_ALL|TRACE_APP|TRACE_BRK|TRACE_DBG|TRACE_DST|TRACE_ERR|TRACE_EXC|TRACE_INF|TRACE_LOG|TRACE_PLS|TRACE_PRF|TRACE_SQL|TRACE_STA|TRACE_TMS|TRACE_WRN}

Values

The following values apply:

• TRACE_ALL Log all possible trace information in the trace file.

• TRACE_APP Log trace information on all the report objects in the trace file.

• TRACE_BRK List all breakpoints in the trace file.

• TRACE_DBG Log debug information.

• TRACE_DST List distribution lists in the trace file. You can use this information to determine which section was sent to which destination.

• TRACE_ERR List error messages and warnings in the trace file.

• TRACE_EXC List Reports Server exceptions.

• TRACE_INF Dumps any information not covered by the other options into the trace file.

• TRACE_LOG Duplicate log information in your trace file. If you have specified a log element, in addition to a trace element, in your server configuration file, this value will cause information that is sent to the log file to also be sent to the trace file.

• TRACE_PLS Log trace information on all the PL/SQL objects in the trace file.

• TRACE_PRF Log performance statistics in the trace file.

• TRACE_SQL Log trace information on all the SQL in the trace file.

• TRACE_STA Provide server and engine state information, such as initialize, ready, run, and shut-down.

• TRACE_TMS Enter a timestamp for each entry in the trace file.

• TRACE_WRN List server warning messages.

Default

TRACE_ALL

Usage Notes

• In a runtime environment, or when you are monitoring Reports Services components, you can use all three TRACE keywords. But for server security, in a server environment you can use only TRACEOPTS. This is to prevent files from being written to the server.

• Tracing for the Reports Server is configured in the server configuration file, server_name.conf. Tracing for the Reports Servlet is configured in the servlet configuration file, rwservlet.properties. Tracing for individual jobs is specified from the runtime command line, via the TRACExxx command line arguments. See Report Trace for additional information about how tracing works with Oracle Reports.

• To use multiple options, list the options in parentheses. For example, TRACE_OPTS=(TRACE_APP, TRACE_PRF) means you want both TRACE_APP and TRACE_PRF applied.

• Trace information can only be generated when running a .rdf file. You cannot specify logging when running a .rep file.

• TRACEOPTS can be used when running JSP-based Web reports from the command line.

A.4.113 UNINSTALL

Table A-124 indicates which commands can use the UNINSTALL keyword.

Table A-124 Commands that can use UNINSTALL

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	no	no	no	yes

Description

Use UNINSTALL to remove an instance of the Reports Server from Microsoft Windows. This process removes the Reports Server service from the system. This keyword is ignored on UNIX.

Syntax

UNINSTALL reports_server_name

Values

reports_server_name The name of an existing Reports Server instance

Default

None

Usage Notes

If you use BATCH=YES with INSTALL, then none of the prompts and dialogs that normally display during the removal process will appear.

A.4.114 UPGRADE_PLSQL

Table A-121 indicates which commands can use the UPGRADE_PLSQL keyword.

Table A-125 Commands that can use UPGRADE_PLSQL

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	no	yes	no	no	no

Description

Use UPGRADE_PLSQL to specify whether to upgrade any PL/SQL code in the report to the latest version required by Oracle Reports Developer.

Syntax

UPGRADE_PLSQL=[YES|NO]

Values

• YES PL/SQL code will be upgraded automatically if necessary.

• NO PL/SQL code will not be updated.

Default

YES

A.4.115 URLPARAMETER

Table A-126 indicates which commands can use the URLPARAMETER keyword.

Table A-126 Commands that can use URLPARAMETER

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	no	no	no	yes	yes	no

Description

Use URLPARAMETER to specify the URL that is to be fetched with the URL engine.

Syntax

URLPARAMETER=http://webserver_name/pagename.html

Values

Any valid URL.

Default

None

Usage Notes

This keyword is relevant when the jobType parameter of the job element in the Reports Server configuration file is rwurl, and a URL engine is in place.

A.4.116 USERID

Table A-127 indicates which commands can use the USERID keyword.

Table A-127 Commands that can use USERID

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
yes	yes	yes	yes	yes	yes	no

Description

Use USERID only if you're not using Single Sign-On. Use USERID to specify your Oracle user name and password, with an optional database name for accessing a remote database. If the password is omitted, then a database logon form opens automatically before the user is allowed to run the report.

If you want users to log on to the database, then omit the password portion of the USERID keyword from the report request. If you want users to log on every time they run report requests, then use the Oracle Reports key mapping file, cgicmd.dat, to specify the runtime command, and include the %D option in the relevant key mapping entry.

Note: For information on using the cgicmd.dat file, see Running Report Requests.

Syntax

userid=username[/password][@database]

Values

username Username assigned by the database administrator.

password Password for the username.

database The name of the database you are accessing.

Default

None

Usage Notes

• The logon definition cannot exceed 512 bytes in length.

• USERID can be used when running JSP-based Web reports from the command line.

A.4.117 WEBSERVER_DEBUG

Table A-128 indicates which commands can use the WEBSERVER_DEBUG keyword.

Table A-128 Commands that can use WEBSERVER_DEBUG

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	yes	no	no	no	no

Description

Use WEBSERVER_DEBUG for JSP debugging. It creates the stderr.log and stdout.log files under the docroot/port# directory, and leaves temporary JSP files under docroot/port#/default and log files under docroot/port#/log for your inspection.

Syntax

WEBSERVER_DEBUG={YES|NO}

Values

YES Create debugging files.

NO Do not create debugging files.

Default

NO

Usage Notes

• Use this keyword only when you're running a job as a JSP.

• Relevant keywords include WEBSERVER_DEBUG,WEBSERVER_DOCROOT,WEBSERVER_PORT.

A.4.118 WEBSERVER_DOCROOT

Table A-129 indicates which commands can use the WEBSERVER_DOCROOT keyword.

Table A-129 Commands that can use WEBSERVER_DOCROOT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	yes	no	no	no	no

Description

Use WEBSERVER_DOCROOT to set the Reports Builder document root directory. All files you reference in your JSP, such as images, HTML, and the like, should be relative to this directory. By setting the document root to your working directory, you avoid having to copy these files around.

Syntax

WEBSERVER_DOCROOT=REPORTS_TMP/docroot

For example:

WEBSERVER_DOCROOT=c:/temp/docroot

Values

The directory to the document root folder in your Oracle Reports temporary folder.

Default

None

Usage Notes

• Use this keyword only when you're running a job as a JSP.

• Relevant keywords include WEBSERVER_DEBUG,WEBSERVER_DOCROOT,WEBSERVER_PORT.

A.4.119 WEBSERVER_PORT

Table A-130 indicates which commands can use the WEBSERVER_PORT keyword.

Table A-130 Commands that can use WEBSERVER_PORT

rwclient	rwrun	rwbuilder	rwconverter	rwservlet	rwcgi	rwserver
no	no	yes	no	no	no	no

Description

Use WEBSERVER_PORT to specify the port number an internal Web server listens to. You can specify a port number (e.g., 3002) or a range of port numbers (e.g., 3100-3200). If a single port number is specified, Oracle Reports tries to start the internal Web server listening on that port. If that port is in use, it tries to get the next available port. If a range of port numbers is specified, Oracle Reports tries to look for a free port in that range.

Syntax

WEBSERVER_PORT=port num

Values

port num Any valid port number or range of port numbers.

Default

Port = 3000

Range of ports = 3000-3010.

Usage Notes

• Use this keyword only when you're running a job as a JSP.

• Relevant keywords include WEBSERVER_DEBUG,WEBSERVER_DOCROOT,WEBSERVER_PORT.

---

¹ Oracle Application Server instance

² Port where the Reports servlet is running

³ Secured server only

⁴ Web server running the CGI scripts

⁵ Web server listener port

⁶ Web server installed on the Windows operating system

⁷ Web server installed on any UNIX operating system

⁸ Secured server only