Bookshelf Home | Contents | Index | Search | PDF | ![]() ![]() ![]() ![]() |
Siebel Anywhere Administration Guide > Defining Upgrade Kits >
Defining a Siebel Client Executables Upgrade Kit
This section provides specific instructions for defining a Siebel Client Executables upgrade kit using the Upgrade Kit Wizard. Instructions in this section apply to the following two component types:
- Siebel Client Executables. Used for language-independent portions of Siebel maintenance releases, known as base portions.
- Siebel Client Executables_[language-code]. Used for language-specific portions of Siebel maintenance releases.
Each of these component types needs its own kit. For example, if you want to install a Siebel maintenance release on a Siebel system that uses both English and German, you would need at least three upgrade kits, one each for Siebel Client Executables, Siebel Client Executables_ENU, and Siebel Client Executables_DEU. The base kit must be installed before the language-specific kits. For instructions on enforcing this by making the language-specific kits dependent on the base kit, see Controlling the Order of Kit Installation. For a general overview of the process of deploying a Siebel maintenance release, see Distributing a Siebel Maintenance Release (Patch).
The following procedure describes how to define either a Siebel Client Executables kit for the base component, or a Siebel Client Executables_[language-code] kit for a language-specific component.
To define a Siebel Client Executables upgrade kit (base or language-specific)
- Gather the information you will need, as described in Upgrade Planning and Preliminary Tasks.
- Start the Upgrade Kit Wizard using the instructions in Running the Upgrade Kit Wizard.
- Use the information you have gathered and the information in Table 18 to respond to the prompts in the Upgrade Kit Wizard.
NOTE: The Minimum Old Version and Maximum Old Version settings are automatically set to NULL for history-independent component types, including Siebel Client Executables, indicating that there are no prerequisite versions required for using the kit. The value for New Version is also automatically supplied for Siebel Client Executables upgrade kits. These settings are displayed only in the final screen of the Upgrade Kit Wizard.
- When you have finished specifying data about the upgrade kit you are defining, click Finish to pass the request to the Upgrade Kit Builder and to exit from the Upgrade Kit Wizard.
A new row for the new upgrade kit appears in the Upgrade Kits list, with Status set to Request Submitted. For more information about the kit information available in this list and other lists, see Viewing Upgrade Kit Properties.
After you define your upgrade kit, you must proceed to activate, apply, and distribute it. For information on these tasks, see Activating, Applying, and Distributing Upgrade Kits.
Information in Table 18 is presented in approximately the sequence used by the Upgrade Kit Wizard.
Table 18. Upgrade Kit Wizard Elements for a Siebel Client Executables Upgrade Kit Wizard Element Element Type Comments Upgrade Component Drop-down list Name of the component the upgrade kit will install or upgrade: UNC Path for Master Installation Text field Universal Naming Convention (UNC) path to the directory that contains the files for the upgrade. The path should identify a network-accessible location.
- For the base component of a Siebel maintenance release (patch), a typical path would be \\machine\seaw\base.
- For a language-specific component of a Siebel maintenance release (patch), a typical path would be \\machine\seaw\ENU.
- For a full release in which Siebel Packager has been used to create an installation package, you must choose the directory where the package was created.
Destination Directory Text field Specifies where the files of the upgrade kit are to be placed on the client machine. Delete destination file when done Check box When this check box is selected, the upgrade kit files will be deleted, automatically, after the kit is installed.If you are defining this kit for a Siebel Client maintenance release, be sure to clear this check box. Uninstall previous Siebel version Check box When this check box is selected, the Upgrade Wizard will automatically uninstall all existing Siebel applications before proceeding with installation of the upgrade. File to execute Read-only text field Specifies one file in the upgrade kit to be executed as part of installation of the kit. Automatically set to install.exe for this component type, indicating that install.exe will be run from the directory identified in UNC Path for Master Installation. Enter command line arguments Text field Specifies any command line arguments to use when running the install.exe file.If you are defining this kit for a Siebel Client maintenance release, do not change the default command line arguments supplied in this field. Major Version Text field Enter a value from the first part of the release number. For example, for maintenance release version 7.5.2.211, set Major Version to 7. Minor Version Text field Enter a value from the second part of the release number. For example, for maintenance release version 7.5.2.211, set Minor Version to 5. Maintenance Version Text field Enter a value from the third part of the release number. For example, for maintenance release version 7.5.2.211, set Maintenance Version to 2. Patch Version Text field Enter a value from the fourth part of the release number. For example, for maintenance release version 7.5.2.211, set Patch Version to 211. Vertical Code Drop-down list If you are using industry-specific Siebel applications, such as Siebel Consumer Sector or Siebel Financial Services, choose SIA from the drop-down list. For all other Siebel eBusiness Applications, leave the field blank. Activate Upgrade Kit Check box It is recommended that you clear this check box for all Siebel Client Executables upgrade kits.If this check box is selected, the files to be included in the upgrade kit will be compressed into a single archive on the Siebel File System automatically. Activation can also be performed manually, as described in Activating, Applying, and Distributing Upgrade Kits.For most upgrade kits, it is recommended that you select this check box. However, if you are creating an upgrade kit that is dependant on another upgrade kit, be sure to clear this check box. For information about working with dependent kits, see Controlling the Order of Kit Installation. Apply Versions Check box It is recommended that you clear this check box for all Siebel Client Executables upgrade kits.Displayed only if Activate Upgrade Kit check box was selected in an earlier Upgrade Kit Wizard screen. When this check box is selected, the compiled information string in the database will be updated automatically with the component version information for this upgrade kit. Applying versions can also be performed manually, as described in Activating, Applying, and Distributing Upgrade Kits.For most upgrade kits, it is recommended that you select this check box. However, if you are creating an upgrade kit that is dependant on another upgrade kit, or if you know that you need to specify nondefault values for Component Minimum Version or Component Maximum Version, be sure to clear this check box. For information about working with dependent kits, see Controlling the Order of Kit Installation. Component Minimum Version Read-only text field Earliest component version acceptable for running the software in read/write mode. Displayed only if Apply Versions check box was selected in an earlier Upgrade Kit Wizard screen. Component Maximum Version Read-only text field Latest component version acceptable for running the software in read/write mode. Displayed only if Apply Versions check box was selected in an earlier Upgrade Kit Wizard screen. Required Upgrade Kit Check box When this check box is selected, the upgrade kit will be required regardless of previous versions installed. (Component Minimum Version and Component Maximum Version are set equal to New Version, but this change is not visible in the Upgrade Kit Wizard.) Displayed only if Apply Versions check box was selected in an earlier Upgrade Kit Wizard screen. Upgrade Kit Title Text field Identifier for the upgrade kit. Defaults to Upgrade Component Name value followed by a space and the New Version value, but can be modified during the kit definition process. After the kit is defined, this identifier appears in the Name field of the Upgrade Kits list. Comments Text field Available for comments about the upgrade kit. Comments entered here are displayed in the Upgrade Kits list.NOTE: To avoid unnecessary download operations, it is recommended that you keep only one upgrade kit for history-independent components, including Siebel Client Executables kits. Depending on your preference, you can either delete or inactivate previous kits for a history-independent component. Deleting a kit increases available space in the Siebel File System. Inactivating a kit prevents use of the kit, while keeping it available in case you need it unexpectedly.
Bookshelf Home | Contents | Index | Search | PDF | ![]() ![]() ![]() ![]() |
Siebel Anywhere Administration Guide Published: 22 August 2003 |