Bookshelf Home | Contents | Index | Search | PDF | ![]() ![]() ![]() ![]() |
Siebel Communications Server Administration Guide > Configuring Communications Drivers and Profiles > Configuring Communications Drivers and Profiles >
Setting Driver Parameter Default Values
You can specify a new default value for a driver parameter. Any default value can be overridden in a profile. Values for certain parameters will typically be provided through a profile parameter override.
If you expect that a particular parameter value will apply to all or most of the profiles you will create—that is, you do not expect to override the value—you should probably specify this value as the default driver parameter value. Doing so will save you time when you create profiles, as you may not have to define an override for this driver parameter.
For the Internet SMTP/POP3 Server driver, which supports the email channel, if end users will create profiles for personal use with the Send Email or Send Fax commands, then you must carefully consider for which parameter values these users will be expected to provide override values.
For information about creating personal profiles, see Creating Communications Profiles for Personal Use. For information about using the Send commands, see Sending Email, Fax, Page, and Wireless Messages.
For information about configuring the Send commands, see Configuring the Send Commands.
To specify a driver parameter default value
- From the application-level menu, choose View > Site Map > Communications Administration > Communications Drivers and Profiles.
- In the Communications Drivers list, select the driver for which you will modify default parameter values.
- Click the Driver Parameters view tab.
- In the Driver Parameters list, clear the existing default value for a parameter, and enter a new value.
Bookshelf Home | Contents | Index | Search | PDF | ![]() ![]() ![]() ![]() |
Siebel Communications Server Administration Guide Published: 23 June 2003 |