BEA Jolt 10.0 and BEA SNMP Agent 10.0 are supported on the same platforms that are supported by BEA Tuxedo 10.0.
A data sheet is provided for each platform. Each data sheet includes the following platform-specific information:
A list of available BEA Tuxedo install sets
Hardware, software, network, and disk space requirements
Instructions for mounting and unmounting the BEA Tuxedo software DVD
Tunable parameters
Platform Support Policy
The BEA policy regarding discontinuance of operating system platform support for Tuxedo and related products is as follows:
BEA Tuxedo 32-bit binaries are supported on 64-bit operating systems, such as on 64-bit versions of HP-UX, Solaris, AIX and Windows. This support is based on OS vendor compatibility assurance that 32-bit applications can run on 64-bit OS without any changes. For more 32-bit application support on 64-bit OS information, please refer to respective OS vendor documentation.
BEA Tuxedo is considered supported in virtualization software environments provided by the operating system vendor (such as Solaris Containers, HP-UX VM and AIX6 WPARs). Even though BEA has performed limited testing in these environments, the support is based on the OS vendor compatibility statement that software applications will run in a virtualization software environment without any changes.
Other virtualization software environments (such as VMWare), are also considered supported, provided that the virtualization software environment is supported by the operating system vendor and the support criteria specified in the operating system data sheets are met.
The BEA policy is that when the operating system provider discontinues supporting a specific release, BEA support is also discontinued.
BEA will not be able to notify customers and users when support for a specific operating system release is discontinued. As a user of the operating system release, we expect you to find out from the operating system provider of discontinued support and plan accordingly.
Platform End of Life Expectancy Table
This section contains the End-of Life expectancy table for Tuxedo 10.0 supported platforms.
Note:
OS EOL dates may have changed since time of this publication. Check with vendor for current OS EOL dates.
Table A-1 Tuxedo 10.0 Platform End of Life Expectancy Table
You probably need to reconfigure the platform kernel before running BEA Tuxedo software because the default values of some tunable parameters are too low.
To adjust the tunable parameters, follow these steps:
Determine whether the current values are adequate.
The following sections list BEA Tuxedo 10.0 requirements for HP-UX 11i v2 (64-bit) systems on Itanium.
Available BEA Tuxedo 10.0 Install Sets for HP-UX 11i v2 (64-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for HP-UX 11i v2 (64-bit)
Intel Itanium (64-bit)
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for HP-UX 11i v2 (64-bit)
Component
Requirement
OS Version (Patches)
HP-UX B.11.23 ia64 (64-bit) (Released no earlier than September 2004)
C/C++ and COBOL compilers
C/C++: HP aC++/ANSI C B3910B A.06.06 [Nov 7 2005]
Must apply patches: PHSS_34046, PHSS_34047, PHSS_34048
COBOL: ACUCOBOL-GT 6.2.0, 7.0.1, 7.2.1, or other compatible COBOL compiler.
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.0_0_9
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.0_0_9
Database for CORBA C++ applications
Tested with Oracle 10g client 10.1.0.5
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0.2.1
Additional Notes:
ATMI users need a C, C++ or COBOL compiler.
CORBA C++ users need a C++ compiler and linker.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
WebSphere MQ 6.0 for this platform (64-bit) without maintenance upgrade may not work properly for transactional services. Please make sure the foregoing maintenance version 6.0.2.1 or upper of WebSphere MQ is installed/upgraded.
Network Requirements for HP-UX 11i v2 (64-bit)
TCP/IP using the Sockets network interface.
Disk Space Requirements for HP-UX 11i v2 (64-bit)
For all install sets and components, 422,682 KB is the minimum disk space requirement for installation on HP-UX 11i v2 (64-bit) Itanium systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for HP-UX 11i v2 (64-bit)
To mount a CD, enter the following commands: su mkdir /cdrom mount -F cdfs -o cdcase /dev/dsk/cdrom_device /cdrom
Here cdrom_device is listed in the output of theioscan -f -n command; cdrom (literal) is the mounting point.
To unmount the CD, enter the following command:
umount /cdrom
Tunable Parameters for HP-UX 11i v2 (64-bit)
For HP-UX configuration instructions, see the kcweb manpage or the kernel configuration section in the sam command.
IBM AIX 5.3 (32-bit) on IBM PowerPC
The following sections list BEA Tuxedo 10.0 requirements for AIX 5.3 (32-bit) systems on IBM PowerPC.
Available BEA Tuxedo 10.0 Install Sets for IBM AIX 5.3 (32-bit)
Full install set
Server install set
Full client install set
ATMI (/WS) client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for IBM AIX 5.3 (32-bit)
IBM PowerPC
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5-1 MB per application server
Software Requirements for IBM AIX 5.3 (32-bit)
Component
Requirement
OS Version (Patches)
IBM AIX 5.3 32-bit
C/C++ and COBOL compilers
C/C++: VisualAge C++ 6.0 or later compatible; C for AIX Compiler V6.0 or later compatible. Note: VisualAge 8.0 (XL C/C++ v8), requires the installation of the most current PTF that can be downloaded from the following URL: http://www-1.ibm.com/support/docview.wss?rs=0&uid=swg24014300
COBOL: Micro Focus 4.0, ACUCOBOL-GT 6.2.0, 7.0.1, 7.2.1, or other compatible COBOL compiler.
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.0 SR2
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.0 SR2
Non-BEA CORBA Java clients
Tested with Java 2 SDK 1.5.x (or higher) Interface Definition Language (IDL) ORB (run time)
iPlanet Directory Server; needed to retrieve X.509v3 digital certificates for SSL
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0
Additional Notes:
When using Oracle, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C, C++, or COBOL compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
BEA Tuxedo CORBA C++ clients support SSL 3.0. SSL connectivity between these clients, and the BEA Tuxedo ISL/ISH has been certified.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPLanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for IBM AIX 5.3 (32-bit)
TCP/IP, using the Sockets network interface
Disk Space Requirements for IBM AIX 5.3 (32-bit)
For all install sets and components, 165,592 KB is the minimum disk space requirement for installation on IBM AIX 5.3 (32-bit) IBM PowerPC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for AIX 5.3 (32-bit)
To mount a CD, examine the file /etc/filesystems to determine whether there is a standard place in which to mount a CD. If there is, enter the mount command and specify the directory named in the /etc/filesystems entry.
For example, to mount a CD when an entry in /etc/filesystems specifies /cd as the mount point, enter:
su /usr/sbin/mount /cd
If /etc/filesystems does not contain a CD entry, enter:
su mkdir /cd /usr/sbin/mount -v cdrfs -r cd_device /cd
In the latter command line, cd_device represents the name of the CD device file, typically /dev/cd0.
Alternatively, you can use the System Management Interface Tool (SMIT) to perform the mount. To use SMIT, enter the following:
smit mount
To unmount the CD, enter the following command:
unmount /cd
In this command line cd represents the mount point.
Tunable Parameters for IBM AIX 5.3 (32-bit)
No IPC configuration is required for AIX. To check the value of a kernel tuning parameter (maxuproc only) enter the following command: lsattr -El sys0 -a maxuproc.
To change the value of a kernel tuning parameter (maxuproc only) enter the following command: chdev -l syso -a maxuproc=”,,,” or can enter smit chgsys and select “maximum number of processes allowed per user.
Microsoft Windows 2003 Server (32-bit) on Intel with MS Visual Studio 2005 Professional Edition
The following sections list BEA Tuxedo 10.0 requirements for Microsoft Windows 2003 Server (32-bit) systems on Intel with MS Visual Studio 2005 Professional Edition.
Available BEA Tuxedo 10.0 Install Sets for Windows 2003 Server (32-bit)
Full install set
Server install set
Full client install set
ATMI (/WS) client install set
CORBA client install set
Jolt client install set
.NET client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for Windows 2003 Server (32-bit)
Pentium processor
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for Windows 2003 Server (32-bit)
Component
Requirement
OS Version (Patches)
Microsoft Windows Server 2003 32-bit
C/C++ and COBOL compilers
C/C++: Visual Studio 2005
COBOL: Micro Focus 4.0, ACUCOBOL-GT 7.0.1, or other compatible COBOL compiler, NetCOBOL version 7.x or later from Fujitsu, or other compatible COBOL compiler.
Tools for the administration desktop
BEA Tuxedo Administration Console on this platform tested with Internet Explorer 6.0 (see note) and Java 2 JRE 1.5.x
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.0_0_9
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.0_0_9
Non BEA CORBA Java clients
Tested with Java 2 SDK 1.5.x Interface Definition Language (IDL) ORB (run time)
iPlanet Directory Server; needed to retrieve X.509v3 digital certificates for SSL
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0
Additional Notes:
When using Oracle, Programmer/2000 Pro*C/C++ version 10.1.0.5 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C or C++ compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for Windows 2003 Server (32-bit)
TCP/IP provided by Microsoft Windows 2003 Server (32-bit Winsock).
Disk Space Requirements for Windows 2003 Server (32-bit)
For all install sets and components, 133,991 KB is the minimum disk space requirement for installation on Windows 2003 Server (32-bit) Intel systems. This requirement assumes installation of the default components for the selected install set.
Tunable Parameters for Windows 2003 Server (32-bit)
The following sections list BEA Tuxedo 10.0 requirements for Microsoft Windows XP systems on Intel.
Available BEA Tuxedo 10.0 Install Sets for Windows XP
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
.NET client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for Windows XP
Pentium processor
512 MB of RAM minimum
Software Requirements for Windows XP
Additional Notes:
When using Oracle, Programmer/2000 Pro*C/C++ version 10.1.0.5 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C or C++ compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for Windows XP
TCP/IP provided by Microsoft Windows XP (32-bit Winsock).
Disk Space Requirements for Windows XP
For all install sets and components, 100,046 KB is the minimum disk space requirement for installation on Windows XP Intel systems. This requirement assumes installation of the default components for the selected install set.
Novell SUSE Linux Enterprise Server 10 (64-bit) on 64-bit Xeon/AMD64
The following sections list BEA Tuxedo 10.0 requirements for Novell SUSE Linux Enterprise Server 10 (64-bit) systems on 64-bit Xeon/AMD64.
Available BEA Tuxedo 10.0 Install Sets for Novell SUSE Linux Enterprise Server 10 (64-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for Novell SUSE Linux Enterprise Server 10 (64-bit)
64-bit Xeon/AMD64
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for Novell SUSE Linux Enterprise Server 10 (64-bit)
Component
Requirement
OS Version (Patches)
Novell SUSE Linux Enterprise Server 10 (x86_64) (Linux 2.6.16.21-0.8-smp)
C/C++ and COBOL compilers
C/C++: gcc/g++ 4.1.0
COBOL: ACUCOBOL-GT 6.2.0, 7.0.1, 7.2.1, or other compatible COBOL compiler.
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.0_0_9x
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.0_0_9
Database for CORBA C++ applications
Tested with Oracle Client 10g
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0.2.2
Additional Notes
The Kerberos Security Plug-in is not supported on this platform.
ATMI users need a C, C++ or COBOL compiler.
CORBA C++ users need a C++ compiler and linker.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
WebSphere MQ 6.0 on this platform (64-bit) without maintenance upgrade may not work properly for transactional services. Please make sure the foregoing maintenance version 6.0.2.2 or upper of WebSphere MQ is installed/upgraded.
Network Requirements for Novell SUSE Linux Enterprise Server 10 (64-bit)
TCP/IP, using the Sockets network interface
Disk Space Requirements for Novell SUSE Linux Enterprise Server 10 (64-bit)
For all install sets and components, 437180 KB is the minimum disk space requirement for installation on Novell SUSE Linux Enterprise Server 9 (64-bit) 64-bit Xeon/AMD64 systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for Novell SUSE Linux Enterprise Server 10 (64-bit)
Mount CD-ROM automatically.
Tunable Parameters for Novell SUSE Linux Enterprise Server 10 (64-bit)
See sysctl manpage.
Sun Microsystems Solaris 9 (32-bit) on SPARC
The following sections list BEA Tuxedo 10.0 requirements for Sun Microsystems Solaris 9 (32-bit) systems on SPARC.
Available BEA Tuxedo 10.0 Install Sets for Solaris 9 (32-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for Solaris 9 (32-bit)
UltraSPARC
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for Solaris 9 (32-bit)
Component
Requirement
OS Version (Patches)
SunOS 5.9
C/C++ and COBOL compilers
C/C++: Sun Studio 11
COBOL: Micro Focus 4.0, ACUCOBOL-GT 6.2.0, 7.0.1, 7.2.1, or other compatible COBOL compiler.
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.0_0_9
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.0_0_9
Non BEA CORBA Java clients
Tested with Java 2 SDK 1.5.0_0_9 Interface Definition Language (IDL) ORB (run time)
iPlanet Directory Server; needed to retrieve X.509v3 digital certificates for SSL
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0
Additional Notes
When Oracle is used, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C, C++, or COBOL compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
BEA Tuxedo CORBA C++ client supports SSL 3.0. SSL connectivity between these clients, and the BEA Tuxedo ISL/ISH has been certified.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for Solaris 9 (32-bit)
TCP/IP using the Sockets network interface.
Disk Space Requirements for Solaris 9 (32-bit)
For all install sets and components, 186,550 KB is the minimum disk space requirement for installation on Solaris 9 (32-bit) SPARC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for Solaris 9 (32-bit)
The Solaris Volume Management software automatically mounts CDs on /cdrom/cdrom0/s0.
It is not necessary to unmount CDs on Solaris systems. However, it is necessary to issue a command to open the CD reader. To open the CD reader, cd to / (root) and enter eject.
Tunable Parameters for Solaris 9 (32-bit)
Use the mdb tool to change the kernel parameters.
The tunable parameters currently set on your system are in the kernel configuration file located in the /etc directory (/etc/system).
Sun Microsystems Solaris 10 (32-bit) on SPARC
The following sections list BEA Tuxedo 10.0 requirements for Sun Microsystems Solaris 10 (32-bit) systems on SPARC.
Available BEA Tuxedo 10.0 Install Sets for Solaris 10 (32-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for Solaris 10 (32-bit)
SPARC
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for Solaris 10 (32-bit)
Component
Requirement
OS Version (Patches)
SunOS 5.10
C/C++ and COBOL compilers
C/C++: Sun Studio 11
COBOL: Micro Focus 4.0, ACUCOBOL-GT 6.2.0, 7.0.1, 7.2.1, or other compatible COBOL compiler.
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.0_0_9
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.0_0_9
Database for CORBA C++ applications
Oracle 10g
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0
Additional Notes
When Oracle is used, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C, C++, or COBOL compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
BEA Tuxedo CORBA C++ client supports SSL 3.0. SSL connectivity between these clients, and the BEA Tuxedo ISL/ISH has been certified.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for Solaris 10 (32-bit)
TCP/IP using the Transport Layer Interface (TLI) network interface.
Disk Space Requirements for Solaris 10 (32-bit)
For all install sets and components, 186,550 KB is the minimum disk space requirement for installation on Solaris 10 (32-bit) SPARC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for Solaris 10 (32-bit)
The Solaris Volume Management software automatically mounts CDs on /cdrom/cdrom0/s0.
It is not necessary to unmount CDs on Solaris systems. However, it is necessary to issue a command to open the CD reader. To open the CD reader, cd to / (root) and enter eject.
Tunable Parameters for Solaris 10 (32-bit)
Use the mdb tool to change the kernel parameters.
The tunable parameters currently set on your system are in the kernel configuration file located in the /etc directory (/etc/system).
Supported Platform Data Sheets (Post Release Ports/Certifications)
The platforms in this section are ports and certifications that are available on the BEA dev2dev Web site as a product download. The supported platform content is abbreviated for these platforms. Please contact BEA Customer Support regarding any additional platform support issues.
HP-UX 11i v2 (64-bit) on PA-RISC
The following sections list BEA Tuxedo 10.0 requirements for HP-UX 11i v2 (64-bit) systems on PA-RISC.
Available BEA Tuxedo 10.0 Install Sets for HP-UX 11i v2 (64-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for HP-UX 11i v2 (64-bit)
PA-RISC (64-bit)
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.0_8
Database for CORBA C++ applications
Tested with Oracle 10gR2
Additional Notes:
ATMI users need a C or C++ compiler.
CORBA C++ users need a C++ compiler and linker.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
WebSphere MQ 6.0 for this platform (64-bit) without maintenance upgrade may not work properly for transactional services. Please make sure the foregoing maintenance version 6.0.2.1 or upper of WebSphere MQ is installed/upgraded.
Network Requirements for HP-UX 11i v2 (64-bit)
TCP/IP using the Sockets network interface.
Disk Space Requirements for HP-UX 11i v2 (64-bit)
For all install sets and components, 500 MB is the minimum disk space requirement for installation on HP-UX 11i v2 (64-bit) PA-RISC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for HP-UX 11i v2 (64-bit)
To mount a CD, enter the following commands: su mkdir /cdrom mount -F cdfs -o cdcase /dev/dsk/cdrom_device /cdrom
Here cdrom_device is listed in the output of theioscan -f -n command; cdrom (literal) is the mounting point.
To unmount the CD, enter the following command:
umount /cdrom
Tunable Parameters for HP-UX 11i v2 (64-bit)
For HP-UX configuration instructions, see the kcweb manpage or the kernel configuration section in the sam command.
HP-UX 11i v3 (64-bit) on Itanium
The following sections list BEA Tuxedo 10.0 requirements for HP-UX 11i v3 (64-bit) systems on Itanium.
Available BEA Tuxedo 10.0 Install Sets for HP-UX 11i v3 (64-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for HP-UX 11i v3 (64-bit)
Intel Itanium (64-bit)
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for HP-UX 11i v3 (64-bit)
Component
Requirement
OS Version (Patches)
HP-UX B.11.31 U ia64
C/C++ compilers
C/C++: HP C/aC++ B3910B A.06.12 [Nov 03 2006]
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.x
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.x
Database for CORBA C++ applications
Tested with Oracle 10gR2
Additional Notes:
ATMI users need a C or C++ compiler.
CORBA C++ users need a C++ compiler and linker.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
WebSphere MQ 6.0 for this platform (64-bit) without maintenance upgrade may not work properly for transactional services. Please make sure the foregoing maintenance version 6.0.2.1 or upper of WebSphere MQ is installed/upgraded.
Network Requirements for HP-UX 11i v3 (64-bit)
TCP/IP using the Sockets network interface.
Disk Space Requirements for HP-UX 11i v3 (64-bit)
For all install sets and components, 422,682 KB is the minimum disk space requirement for installation on HP-UX 11i v3 (64-bit) Itanium systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for HP-UX 11i v3 (64-bit)
To mount a CD, enter the following commands: su mkdir /cdrom mount -F cdfs -o cdcase /dev/dsk/cdrom_device /cdrom
Here cdrom_device is listed in the output of theioscan -f -n command; cdrom (literal) is the mounting point.
To unmount the CD, enter the following command:
umount /cdrom
Tunable Parameters for HP-UX 11i v3 (64-bit)
For HP-UX configuration instructions, see the kcweb manpage or the kernel configuration section in the sam command.
HP-UX 11i v3 (64-bit) on PA-RISC
The following sections list BEA Tuxedo 10.0 requirements for HP-UX 11i v3 (64-bit) systems on PA-RISC.
Available BEA Tuxedo 10.0 Install Sets for HP-UX 11i v3 (64-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for HP-UX 11i v3 (64-bit)
PA-RISC (64-bit)
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.0.03
Database for CORBA C++ applications
Tested with Oracle 10gR2
Additional Notes:
ATMI users need a C or C++ compiler.
CORBA C++ users need a C++ compiler and linker.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
WebSphere MQ 6.0 for this platform (64-bit) without maintenance upgrade may not work properly for transactional services. Please make sure the foregoing maintenance version 6.0.2.1 or upper of WebSphere MQ is installed/upgraded.
Network Requirements for HP-UX 11i v3 (64-bit)
TCP/IP using the Sockets network interface.
Disk Space Requirements for HP-UX 11i v3 (64-bit)
For all install sets and components, 400 MB is the minimum disk space requirement for installation on HP-UX 11i v3 (64-bit) PA-RISC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for HP-UX 11i v3 (64-bit)
To mount a CD, enter the following commands: su mkdir /cdrom mount -F cdfs -o cdcase /dev/dsk/cdrom_device /cdrom
Here cdrom_device is listed in the output of theioscan -f -n command; cdrom (literal) is the mounting point.
To unmount the CD, enter the following command:
umount /cdrom
Tunable Parameters for HP-UX 11i v3 (64-bit)
For HP-UX configuration instructions, see the kcweb manpage or the kernel configuration section in the sam command.
IBM AIX 5.3 (64-bit) on IBM PowerPC
The following sections list BEA Tuxedo 10.0 requirements for AIX 5.3 (64-bit) systems on IBM PowerPC.
Available BEA Tuxedo 10.0 Install Sets for IBM AIX 5.3 (64-bit)
Full install set
Server install set
Full client install set
ATMI (/WS) client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for IBM AIX 5.3 (64-bit)
IBM PowerPC
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5-1 MB per application server
Software Requirements for IBM AIX 5.3 (64-bit)
Component
Requirement
OS Version (Patches)
IBM AIX 5.3 64-bit (ML3)
C/C++ and COBOL compilers
C/C++: IBM XL C/C++ 7.0.0.0.
COBOL: Micro Focus Server Express 5.0
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.x SR2
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.x (64-bit) SR2
Non-BEA CORBA Java clients
Tested with Java 2 SDK 1.5.x SR2 (or higher) Interface Definition Language (IDL) ORB (run time)
iPlanet Directory Server; needed to retrieve X.509v3 digital certificates for SSL
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0.2.2
Additional Notes:
Must apply maintenance level 5300-03.
Posix threads library version must be lower than 5.3.0.50.
When using the BEA MQ Adapter for Tuxedo in an AIX version 5.3 64-bit environment, if the dltmqlnk command is not executed to remove the symbolic link to the 32-bit WebSphere MQ libraries, you must export the TUXEDO_LIBPATH_PREPEND environment variable and set its value to the 64-bit WebSphere MQ libraries path.
When using Oracle, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C, C++, or COBOL compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
BEA Tuxedo CORBA C++ clients support SSL 3.0. SSL connectivity between these clients, and the BEA Tuxedo ISL/ISH has been certified.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPLanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for IBM AIX 5.3 (64-bit)
TCP/IP, using the Sockets network interface
Disk Space Requirements for IBM AIX 5.3 (64-bit)
For all install sets and components, 165,592 KB is the minimum disk space requirement for installation on IBM AIX 5.3 (64-bit) IBM PowerPC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for AIX 5.3 (64-bit)
To mount a CD, examine the file /etc/filesystems to determine whether there is a standard place in which to mount a CD. If there is, enter the mount command and specify the directory named in the /etc/filesystems entry.
For example, to mount a CD when an entry in /etc/filesystems specifies /cd as the mount point, enter:
su /usr/sbin/mount /cd
If /etc/filesystems does not contain a CD entry, enter:
su mkdir /cd /usr/sbin/mount -v cdrfs -r cd_device /cd
In the latter command line, cd_device represents the name of the CD device file, typically /dev/cd0.
Alternatively, you can use the System Management Interface Tool (SMIT) to perform the mount. To use SMIT, enter the following:
smit mount
To unmount the CD, enter the following command:
unmount /cd
In this command line cd represents the mount point.
Tunable Parameters for IBM AIX 5.3 (64-bit)
No IPC configuration is required for AIX. To check the value of a kernel tuning parameter (maxuproc only) enter the following command: lsattr -El sys0 -a maxuproc.
To change the value of a kernel tuning parameter (maxuproc only) enter the following command: chdev -l syso -a maxuproc=”,,,” or can enter smit chgsys and select “maximum number of processes allowed per user.
IBM AIX 6.1 (32-bit) on IBM PowerPC
The following sections list BEA Tuxedo 10.0 requirements for AIX 6.1 (32-bit) systems on IBM PowerPC.
Available BEA Tuxedo 10.0 Install Sets for IBM AIX 6.1 (32-bit)
Full install set
Server install set
Full client install set
ATMI (/WS) client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for IBM AIX 6.1 (32-bit)
IBM PowerPC
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5-1 MB per application server
Software Requirements for IBM AIX 6.1 (32-bit)
Component
Requirement
OS Version (Patches)
IBM AIX 6.1 32-bit
C/C++ compilers
C/C++: C/C++: IBM XL C/C++ 9.0.
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.x
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.x
Non-BEA CORBA Java clients
Tested with Java 2 SDK 1.5.x (or higher) Interface Definition Language (IDL) ORB (run time)
iPlanet Directory Server; needed to retrieve X.509v3 digital certificates for SSL
Additional Notes:
Micro Focus COBOL does not support IBM AIX 6.1.
IBM WebSphere MQ does not support IBM AIX 6.1.
When using Oracle, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C or C++, or compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
BEA Tuxedo CORBA C++ clients support SSL 3.0. SSL connectivity between these clients, and the BEA Tuxedo ISL/ISH has been certified.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPLanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for IBM AIX 6.1 (32-bit)
TCP/IP, using the Sockets network interface
Disk Space Requirements for IBM AIX 6.1 (32-bit)
For all install sets and components, 165,592 KB is the minimum disk space requirement for installation on IBM AIX 6.1 (32-bit) IBM PowerPC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for AIX 6.1 (32-bit)
To mount a CD, examine the file /etc/filesystems to determine whether there is a standard place in which to mount a CD. If there is, enter the mount command and specify the directory named in the /etc/filesystems entry.
For example, to mount a CD when an entry in /etc/filesystems specifies /cd as the mount point, enter:
su /usr/sbin/mount /cd
If /etc/filesystems does not contain a CD entry, enter:
su mkdir /cd /usr/sbin/mount -v cdrfs -r cd_device /cd
In the latter command line, cd_device represents the name of the CD device file, typically /dev/cd0.
Alternatively, you can use the System Management Interface Tool (SMIT) to perform the mount. To use SMIT, enter the following:
smit mount
To unmount the CD, enter the following command:
unmount /cd
In this command line cd represents the mount point.
Tunable Parameters for IBM AIX 6.1 (32-bit)
No IPC configuration is required for AIX. To check the value of a kernel tuning parameter (maxuproc only) enter the following command: lsattr -El sys0 -a maxuproc.
To change the value of a kernel tuning parameter (maxuproc only) enter the following command: chdev -l syso -a maxuproc=”,,,” or can enter smit chgsys and select “maximum number of processes allowed per user.
IBM AIX 6.1 (64-bit) on IBM PowerPC
The following sections list BEA Tuxedo 10.0 requirements for AIX 6.1 (64-bit) systems on IBM PowerPC.
Available BEA Tuxedo 10.0 Install Sets for IBM AIX 6.1 (64-bit)
Full install set
Server install set
Full client install set
ATMI (/WS) client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for IBM AIX 6.1 (64-bit)
64-bit IBM PowerPC
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5-1 MB per application server
Software Requirements for IBM AIX 6.1 (64-bit)
Component
Requirement
OS Version (Patches)
IBM AIX 6.1 64-bit
C/C++ compilers
C/C++: IBM XL C/C++ 9.0.
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.x
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.x (64-bit)
Non-BEA CORBA Java clients
Tested with Java 2 SDK 1.5.x SR2 (or higher) Interface Definition Language (IDL) ORB (run time)
iPlanet Directory Server; needed to retrieve X.509v3 digital certificates for SSL
Additional Notes:
Micro Focus COBOL does not support IBM AIX 6.1.
IBM WebSphere MQ does not support IBM AIX 6.1.
Must apply maintenance level 5300-03.
Posix threads library version must be lower than 5.3.0.50.
When using the BEA MQ Adapter for Tuxedo in an AIX version 6.1 64-bit environment, if the dltmqlnk command is not executed to remove the symbolic link to the 32-bit WebSphere MQ libraries, you must export the TUXEDO_LIBPATH_PREPEND environment variable and set its value to the 64-bit WebSphere MQ libraries path.
When using Oracle, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C or C++ compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
BEA Tuxedo CORBA C++ clients support SSL 3.0. SSL connectivity between these clients, and the BEA Tuxedo ISL/ISH has been certified.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPLanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for IBM AIX 6.1 (64-bit)
TCP/IP, using the Sockets network interface
Disk Space Requirements for IBM AIX 6.1 (64-bit)
For all install sets and components, 165,592 KB is the minimum disk space requirement for installation on IBM AIX 6.1 (64-bit) IBM PowerPC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for AIX 6.1 (64-bit)
To mount a CD, examine the file /etc/filesystems to determine whether there is a standard place in which to mount a CD. If there is, enter the mount command and specify the directory named in the /etc/filesystems entry.
For example, to mount a CD when an entry in /etc/filesystems specifies /cd as the mount point, enter:
su /usr/sbin/mount /cd
If /etc/filesystems does not contain a CD entry, enter:
su mkdir /cd /usr/sbin/mount -v cdrfs -r cd_device /cd
In the latter command line, cd_device represents the name of the CD device file, typically /dev/cd0.
Alternatively, you can use the System Management Interface Tool (SMIT) to perform the mount. To use SMIT, enter the following:
smit mount
To unmount the CD, enter the following command:
unmount /cd
In this command line cd represents the mount point.
Tunable Parameters for IBM AIX 6.1 (64-bit)
No IPC configuration is required for AIX. To check the value of a kernel tuning parameter (maxuproc only) enter the following command: lsattr -El sys0 -a maxuproc.
To change the value of a kernel tuning parameter (maxuproc only) enter the following command: chdev -l syso -a maxuproc=”,,,” or can enter smit chgsys and select “maximum number of processes allowed per user.
Novell SUSE Linux Enterprise Server 10 (32-bit) on Pentium
The following sections list BEA Tuxedo 10.0 requirements for Novell SUSE Linux Enterprise Server 10 (32-bit) systems on Pentium.
Available BEA Tuxedo 10.0 Install Sets for Novell SUSE Linux Enterprise Server 10 (32-bit)
Hardware Requirements for Novell SUSE Linux Enterprise Server 10 (32-bit)
Intel Pentium 32-bit
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for Novell SUSE Linux Enterprise Server 10 (32-bit)
Component
Requirement
OS Version (Patches)
Novell SUSE Linux Enterprise Server 10 (i586)
C/C++ compilers
C/C++: gcc 4.1.0 (SUSE Linux)
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.0_12
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK1.5.0_12
Database for CORBA C++ applications
Tested with Oracle Client 10g
Additional Notes
The Kerberos Security Plug-in is not supported on this platform.
ATMI users need a C or C++ compiler.
CORBA C++ users need a C++ compiler and linker.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for Novell SUSE Linux Enterprise Server 10 (32-bit)
TCP/IP, using the Sockets network interface
Disk Space Requirements for Novell SUSE Linux Enterprise Server 10 (32-bit)
For all install sets and components, 216,373 KB is the minimum disk space requirement for installation on Novell SUSE Linux Enterprise Server 10 (32-bit) Pentium systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for Novell SUSE Linux Enterprise Server 10 (32-bit)
Mount CD-ROM automatically.
Tunable Parameters for Novell SUSE Linux Enterprise Server 10 (32-bit)
See sysctl manpage.
Red Hat Linux Enterprise AS 5 (32-bit) on Pentium
The following sections list BEA Tuxedo 10.0 requirements for Red Hat Linux Enterprise AS 5 (32-bit) on Pentium.
Available BEA Tuxedo 10.0 Install Sets for Red Hat Linux Enterprise AS 5 (32-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for Red Hat Linux Enterprise AS 5 (32-bit)
32-bit Intel Pentium
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for Red Hat Linux Enterprise AS 5 (32-bit)
Component
Requirement
OS Version
Red Hat Enterprise Linux Server release 5
C/C++ compilers
C/C++: gcc version 4.1.1
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.0_12
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.0_12
Database for CORBA C++ applications
Tested with Oracle Client 10gR2
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0.2.2
Additional Notes
The Kerberos Security Plug-in is not supported on this platform.
ATMI users need a C or C++ compiler.
CORBA C++ users need a C++ compiler and linker.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
WebSphere MQ 6.0 on this platform (64-bit) without maintenance upgrade may not work properly for transactional services. Please make sure the foregoing maintenance version 6.0.2.2 or upper of WebSphere MQ is installed/upgraded.
Network Requirements for Red Hat Linux Enterprise AS 5 (32-bit)
TCP/IP, using the Sockets network interface
Disk Space Requirements for Red Hat Linux Enterprise AS 5 (32-bit)
For all install sets and components, 437180 KB is the minimum disk space requirement for installation on Red Hat Linux Enterprise AS 5 (32-bit) on Pentium systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for Red Hat Linux Enterprise AS 5 (32-bit)
Mount CD-ROM automatically.
Tunable Parameters forRed Hat Linux Enterprise AS 5 (32-bit)
See sysctl manpage.
Red Hat Linux Enterprise AS 5 (64-bit) on 64-bit Xeon/AMD64
The following sections list BEA Tuxedo 10.0 requirements for Red Hat Linux Enterprise AS 5 (64-bit) on 64-bit Xeon/AMD64.
Available BEA Tuxedo 10.0 Install Sets for Red Hat Linux Enterprise AS 5 (64-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for Red Hat Linux Enterprise AS 5 (64-bit)
64-bit Xeon/AMD64
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for Red Hat Linux Enterprise AS 5 (64-bit)
Component
Requirement
OS Version (Patches)
Red Hat Linux Enterprise AS 5 (x86_64) (Linux 2.6.18-8.el5xen #1 smp)
C/C++ and COBOL compilers
C/C++: gcc version 4.1.1 20070105 (Red Hat 4.1.1-52) +compat-libstdc++-33-3.2.3-61
COBOL: Micro Focus 5.0, ACUCOBOL-GT 7.0.1, or other compatible COBOL compiler
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.x
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.x
Database for CORBA C++ applications
Tested with Oracle Client 10gR2
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0.2.2
Additional Notes
The Kerberos Security Plug-in is not supported on this platform.
ATMI users need a C, C++ or COBOL compiler.
CORBA C++ users need a C++ compiler and linker.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
WebSphere MQ 6.0 on this platform (64-bit) without maintenance upgrade may not work properly for transactional services. Please make sure the foregoing maintenance version 6.0.2.2 or upper of WebSphere MQ is installed/upgraded.
Network Requirements for Red Hat Linux Enterprise AS 5 (64-bit)
TCP/IP, using the Sockets network interface
Disk Space Requirements for Red Hat Linux Enterprise AS 5 (64-bit)
For all install sets and components, 437180 KB is the minimum disk space requirement for installation on Red Hat Linux Enterprise AS 5 (64-bit) 64-bit Xeon/AMD64 systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for Red Hat Linux Enterprise AS 5 (64-bit)
Mount CD-ROM automatically.
Tunable Parameters for Red Hat Linux Enterprise AS 5 (64-bit)
See sysctl manpage.
Sun Microsystems Solaris 9 (64-bit) on SPARC
The following sections list BEA Tuxedo 10.0 requirements for Sun Microsystems Solaris 9 (64-bit) systems on SPARC.
Available BEA Tuxedo 10.0 Install Sets for Solaris 9 (64-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for Solaris 9 (64-bit)
UltraSPARC
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for Solaris 9 (64-bit)
Component
Requirement
OS Version (Patches)
SunOS 5.9 (64-bit)
C/C++ and COBOL compilers
C/C++: Sun Studio 11
COBOL: Micro Focus 5.0, ACUCOBOL-GT 6.2.0, 7.0.1, 7.2.1, or other compatible COBOL compiler.
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.x
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.x
Non BEA CORBA Java clients
Tested with Java 2 SDK 1.5.x Interface Definition Language (IDL) ORB (run time)
iPlanet Directory Server; needed to retrieve X.509v3 digital certificates for SSL
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0
Additional Notes
When Oracle is used, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C, C++, or COBOL compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
BEA Tuxedo CORBA C++ client supports SSL 3.0. SSL connectivity between these clients, and the BEA Tuxedo ISL/ISH has been certified.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for Solaris 9 (64-bit)
TCP/IP using the Sockets network interface.
Disk Space Requirements for Solaris 9 (64-bit)
For all install sets and components, 186,550 KB is the minimum disk space requirement for installation on Solaris 9 (64-bit) SPARC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for Solaris 9 (64-bit)
The Solaris Volume Management software automatically mounts CDs on /cdrom/cdrom0/s0.
It is not necessary to unmount CDs on Solaris systems. However, it is necessary to issue a command to open the CD reader. To open the CD reader, cd to / (root) and enter eject.
Tunable Parameters for Solaris 9 (64-bit)
Use the mdb tool to change the kernel parameters.
The tunable parameters currently set on your system are in the kernel configuration file located in the /etc directory (/etc/system).
Sun Microsystems Solaris 10 (64-bit) on SPARC
The following sections list BEA Tuxedo 10.0 requirements for Sun Microsystems Solaris 10 (64-bit) systems on SPARC.
Available BEA Tuxedo 10.0 Install Sets for Solaris 10 (64-bit)
Full install set
Server install set
Full client install set
ATMI client install set
CORBA client install set
Jolt client install set
For descriptions of BEA Tuxedo install sets, see Install Sets.
Hardware Requirements for Solaris Solaris 10 (64-bit)
UltraSPARC
1 GB of RAM minimum
1 additional MB RAM for each BEA Tuxedo application, plus 0.5– 1 MB per application server
Software Requirements for Solaris Solaris 10 (64-bit)
Component
Requirement
OS Version (Patches)
SunOS 5.10 (64-bit)
C/C++ and COBOL compilers
C/C++: Sun Studio 11
COBOL: Micro Focus 5.0, ACUCOBOL-GT 7.0.1 or other compatible COBOL compiler.
Java 2 JRE for the Java run-time environment
Tested with Java 2 JRE 1.5.x
Java 2 Software Development Kit (SDK) for the Java development environment
Tested with JDK 1.5.x
Non BEA CORBA Java clients
Tested with Java 2 SDK 1.5.x Interface Definition Language (IDL) ORB (run time)
iPlanet Directory Server; needed to retrieve X.509v3 digital certificates for SSL
IBM WebSphere MQ for Tuxedo MQ Adapter
Tested with WebSphere MQ 6.0
Additional Notes
When Oracle is used, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the BEA Tuxedo University sample applications.
ATMI users need a C, C++, or COBOL compiler.
CORBA C++ users need a C++ compiler and linker.
For BEA Tuxedo 56-bit,128-, and 256-bit encryption:
LLE and SSL are available for BEA Tuxedo ATMI client (/WS) connections to the BEA Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).
LLE and SSL are available for BEA Jolt client connections to the BEA Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).
LLE and SSL support connections between machines and domains.
The BEA Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.
BEA Tuxedo CORBA C++ client supports SSL 3.0. SSL connectivity between these clients, and the BEA Tuxedo ISL/ISH has been certified.
To support certificate-based authentication when using SSL, BEA Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.
For compiler compatibility:
Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:
Source Code:
C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.
Executables and libraries:
Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.
Network Requirements for Solaris Solaris 10 (64-bit)
TCP/IP using the Sockets network interface.
Disk Space Requirements for Solaris Solaris 10 (64-bit)
For all install sets and components, 186,550 KB is the minimum disk space requirement for installation on Solaris 10 (64-bit) SPARC systems. This requirement assumes installation of the default components for the selected install set.
Mounting and Unmounting the CD for Solaris Solaris 10 (64-bit)
The Solaris Volume Management software automatically mounts CDs on /cdrom/cdrom0/s0.
It is not necessary to unmount CDs on Solaris systems. However, it is necessary to issue a command to open the CD reader. To open the CD reader, cd to / (root) and enter eject.
Tunable Parameters for Solaris Solaris 10 (64-bit)
Use the mdb tool to change the kernel parameters.
The tunable parameters currently set on your system are in the kernel configuration file located in the /etc directory (/etc/system).
If threads are not supported on your platform, your application must either (1) exclude threads or (2) serialize threaded access through all BEA Tuxedo system calls.
