|
|
|
|
|
|
Error Messages
The following SNA Communications Resource Manager (SNACRM) messages can be displayed in the Weblogic Server (WLS) startup window.
|
9001:ERROR |
<taskname> timed out with failCode <failcode> |
|
|
|
DESCRIPTION |
A conversation has timed out in the SNACRM with the stack return code of <failcode>. A timer event set to watch a conversation has expired. <taskname> may appear as: OB-Conversation #nn (<linkref>) tx #m <tranname>, or IB-Conversation #nn (<linkref>) tx #m <tranname> where: nn is an internal APPC conversation number. m is the transaction context where -1 signifies non-transactional. |
|
|
ACTION |
Examine stderr and the ULOG for additional information concerning the failure. |
|
9002:ERROR |
Server (<stackref>) Creation Failed |
|
|
|
DESCRIPTION |
SNACRM was unable to instantiate the stack object due to an error. |
|
|
ACTION |
Check for additional messages in stderr. The shared library for the stack or the stack interface might not have been loaded due to an incorrect library path. |
|
9003:ERROR |
Server Failed (<stackref>), Code = <returncode> |
|
|
|
DESCRIPTION |
SNACRM received a bad return code from the stack start-up. |
|
|
ACTION |
The <returncode> is the value returned by the SNA Stack software. Check the status of the stack, the configuration of the stack, and the JCRMGW.CFG. Note: Unless you started the SNACRM as a Tuxedo server, you must manually kill the SNACRM process. |
|
9004:ERROR |
Configuration change on link <linkref> requires cold start |
|
|
|
DESCRIPTION |
Attempting to do a warm start after changing the domain configuration. |
|
|
ACTION |
Change start type to "COLD" and restart. |
|
9005:WARNING |
Unrecovered transaction, ID=<tctxt>, blob dropped. Transaction presumed forgotten. |
|
|
|
DESCRIPTION |
An attempt was make by Tuxedo to recover the specified transaction that was unknown by the SNACRM. It is presumed that it was already committed or aborted prior to the recovery attempt. |
|
|
ACTION |
None. This message is for information only. |
|
9006:ERROR |
Unable to start the recovery task for link <linkref> |
|
|
|
DESCRIPTION |
An error occurred during the warm start of Tuxedo. |
|
|
ACTION |
Cold start the Tuxedo application. |
|
9008:WARNING |
Unknown tranid dropped, id=<tctxt> |
|
|
|
DESCRIPTION |
Recovery was requested by Tuxedo on a transaction that was already forgotten by the SNACRM. |
|
|
ACTION |
None. This message is for information only. |
|
9009:ERROR |
No blob with recovery request. Transaction dropped, id=<tctxt> |
|
|
|
DESCRIPTION |
Attempting to warm start after the SNACRM's BLOBLOG has been modified. |
|
|
ACTION |
Change start type to "COLD" and restart. |
|
9010:ERROR |
<taskname> failed with failCode <failcode> |
|
|
|
DESCRIPTION |
A conversation has failed with the stack return code of <failcode>. <taskname> may appear as: OB-Conversation #nn (<linkref>) tx #m <tranname>, or IB-Conversation #nn (<linkref>) tx #m <tranname> where: nn is an internal APPC conversation number. m is the transaction context where -1 signifies non-transactional. Possible values for the <failcode> are:
|
|
|
ACTION |
Examine stderr and the ULOG for additional information concerning the failure. For failcode Input/Output, verify that the user starting the SNACRM process has the proper file permissions for the BLOBLOG and RSTRTLOG. If no apparent error is found, contact BEA Customer Support. |
|
9011:ERROR |
Attempt to connect as second master refused! |
|
|
|
DESCRIPTION |
A second GWSNAX is attempting to connect to the SNACRM as a master gateway. Only one master gateway is allowed. |
|
|
ACTION |
Ensure that multiple Tuxedo configurations do not use the same SNACRM address. |
|
9012:ERROR |
Attempt to connect as master in autonomous mode refused! |
|
|
|
DESCRIPTION |
An attempt to connect to the SNACRM as a master gateway was made when the SNACRM was running in autonomous mode. |
|
|
ACTION |
Ensure that multiple Tuxedo configurations do not use the same SNACRM address. |
|
9013:ERROR |
Attempt to connect with incorrect group name (<groupname>) refused! |
|
|
|
DESCRIPTION |
The group name in the JCRMGW.CFG file does not match the group name specified in the SNACRM command line. |
|
|
ACTION |
Correct the group name that is in error and restart. |
|
9014:ERROR |
INTERNAL ERROR: memory allocation failed [for new context/data buffer] |
|
|
|
DESCRIPTION |
Internal error allocating memory. No more memory. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9015:ERROR |
INTERNAL ERROR: server registration failed |
|
|
|
DESCRIPTION |
Internal error registering the APPC server. APPC libraries not found. The stack failed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9016:ERROR |
Link refers to undefined APPC stack (<stackref>)! |
|
|
|
DESCRIPTION |
The stackref in the link configuration is incorrect. |
|
|
ACTION |
Correct the stackref that is in error, run dmloadcf, and restart. |
|
9017:ERROR |
INTERNAL ERROR: link registration failed |
|
|
|
DESCRIPTION |
Internal error registering the link. The stack failed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9018:ERROR |
Invalid Transition <additional information> |
|
|
|
DESCRIPTION |
An internal state table failure has occurred. The <additional information> will be one of the following:
|
|
|
ACTION |
Contact BEA Customer Support. |
|
9019:ERROR |
Unknown Service Correlator = <correlator>, message dropped |
|
|
|
DESCRIPTION |
Internal error assigning service correlator values. Message context lost. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9020:ERROR |
Duplicate Service Correlator = <correlator> |
|
|
|
DESCRIPTION |
Internal error assigning service correlator values. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9021:ERROR |
Invalid Remote Link Name <linkref> |
|
|
|
DESCRIPTION |
The remote link name in a request does not match any defined link name. |
|
|
ACTION |
Correct the JCRMGW.CFG and restart. |
|
9022:ERROR |
Invalid transaction context = <tctxt> |
|
|
|
DESCRIPTION |
Internal error assigning transaction context values. Bad transaction. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9023:ERROR |
Unknown Service Correlator = <correlator>, message dropped |
|
|
|
DESCRIPTION |
Internal error assigning service correlator values. Message context lost. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9024:ERROR |
Invalid initial syncpoint received from subordinate, tx#<tid> |
|
|
|
DESCRIPTION |
Syncpoint processing protocol violation. Subordinate member of conversation attempted to initiate a syncpoint. XA does not support syncpoints from subordinate members. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9025:ERROR |
Invalid Input Message Discarded |
|
|
|
DESCRIPTION |
Internal error, bad message sent between GWSNAX and SNACRM. Possibly incompatible GWSNAX and SNACRM. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9026:ERROR |
CNOS Notification Received for unknown partner <partnerLU> |
|
|
|
DESCRIPTION |
Multiple instances of the SNACRM may be using the same local LU. |
|
|
ACTION |
Ensure that multiple Tuxedo configurations do not use the same local LU. |
|
9027:WARNING |
Remote Stop Received for <linkref> |
|
|
|
DESCRIPTION |
The remote host has issued a stop for the specified link. |
|
|
ACTION |
None. This message for information only. |
|
9028:WARNING |
Remote Start Received for <linkref> |
|
|
|
DESCRIPTION |
The remote host has issued a start for the specified link. |
|
|
ACTION |
None. This message for information only. |
|
9029:ERROR |
Undefined Remote LU on link <linkref> |
|
|
|
DESCRIPTION |
The remote LU does not exist as defined. |
|
|
ACTION |
Check the JCRMGW.CFG file and the stack configuration and correct the mis-match. |
|
9030:ERROR |
Unable to start session on link <linkref>. Reason=<reason> |
|
|
|
DESCRIPTION |
Link activation failure due to SNA error. |
|
|
ACTION |
<reason> is the description of the stack return code. Determine the cause and correct. |
|
9031:ERROR |
Unable to initialize link <linkref>. Reason=<reason> |
|
|
|
DESCRIPTION |
Link initialization failure due to SNA error. |
|
|
ACTION |
<reason> is the description of the stack return code. Determine the cause and correct. |
|
9032:ERROR |
No Available Session on link <linkref> for context <correlator> |
|
|
|
DESCRIPTION |
Max sessions has been exceeded. |
|
|
ACTION |
Check session limits in JCRMGW.CFG, stack configuration, CICS or VTAM. Increase if necessary. |
|
9033:ERROR |
Requested Synclevel not supported by link <linkref> for context <correlator> (synclevel <level>) |
|
|
|
DESCRIPTION |
Attempted to issue a request at sync level <level> on a link that does not support that level. |
|
|
ACTION |
Correct application or JCRMGW.CFG. |
|
9034:ERROR |
Service Request at SyncLevel=2 Rejected on PENDING link <linkref> for context <correlator> |
|
|
|
DESCRIPTION |
An attempt to start a new sync level 2 request has been received and the Link is currently processing recovery information. |
|
|
ACTION |
Wait until recovery is complete to request sync level 2 services. |
|
9035:ERROR |
Inbound Request Transform Failed (<status>) for context <correlator> |
|
|
|
DESCRIPTION |
An error has occurred while processing the CICS transform for an inbound DPL request. This normally occurs when the API entry in the JCRMGW.CFG for the local service specifies CICS instead of ATMI. |
|
|
ACTION |
Check JCRMGW.CFG for incorrect specification of local service API entry. |
|
9036:ERROR |
Inbound Response Transform Failed (<status>) for context <correlator> |
|
|
|
DESCRIPTION |
An error has occurred while processing the CICS transform for an inbound DPL response. This normally occurs when the API entry in the JCRMGW.CFG for the local service specifies CICS instead of ATMI. |
|
|
ACTION |
Check JCRMGW.CFG for incorrect specification of local service API entry. |
|
9037:ERROR |
Outbound Request Transform Failed (<status>) for context <correlator> |
|
|
|
DESCRIPTION |
An error has occurred while processing the CICS transform for an outbound DPL request. This normally occurs when the API entry in the JCRMGW.CFG for the remote service specifies CICS instead of ATMI. |
|
|
ACTION |
Check JCRMGW.CFG for incorrect specification of local service API entry. |
|
9038:ERROR |
Outbound Response Transform Failed (<status>) for context <correlator> |
|
|
|
DESCRIPTION |
An error has occurred while processing the CICS transform for an outbound DPL response. This normally occurs when the API entry in the JCRMGW.CFG for the remote service specifies CICS instead of ATMI. |
|
|
ACTION |
Check JCRMGW.CFG for incorrect specification of local service API entry. |
|
9039:ERROR |
Conversation terminated without confirm for context <correlator> |
|
|
|
DESCRIPTION |
Sync level 2 conversation was terminated with out confirm. |
|
|
ACTION |
Check application program and correct. |
|
9040:ERROR |
Inbound Confirm not supported |
|
|
|
DESCRIPTION |
Host application is requesting an inbound confirm. This is not supported. |
|
|
ACTION |
Check host application program and correct. |
|
9041:ERROR |
Inbound Confirm for multi-ISRT not supported |
|
|
|
DESCRIPTION |
Host IMS application is requesting an inbound confirm and using multiple ISRT commands. This is not supported. |
|
|
ACTION |
Check host application program and correct. |
|
9043:ERROR |
Missing send last from host (ATMI request/response) for context <correlator> |
|
|
|
DESCRIPTION |
Host application did not issue send last during an outbound request/response service. The host application may have abended. |
|
|
ACTION |
Check application program and correct. |
|
9044:INFO |
DPL program abended with CICS code <abendcode>, program=<progname> |
|
|
|
DESCRIPTION |
The specified host DPL program has abended with the code specified. |
|
|
ACTION |
None. This message is for information only. |
|
9045:INFO |
DPL program failed with CICS rcode <eibrcode>, program=<progname> |
|
|
|
DESCRIPTION |
The specified host DPL program has failed with the eibrcode specified. |
|
|
ACTION |
None. This message is for information only. |
|
9046:ERROR |
Invalid combination for Service Context <correlator>, <combination> |
|
|
|
DESCRIPTION |
The specified <combination> is invalid. It will be one of the following:
|
|
|
ACTION |
Examine the JCRMGW.CFG and make corrections. |
|
9047:ERROR |
Sequence number error for Service Context <correlator>, seqno <seqno> |
|
|
|
DESCRIPTION |
There has been a sequence number failure for the specified context. Context is out of sequence. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9048:ERROR |
Invalid conversation task for Service Context <correlator>, task=<task> |
|
|
|
DESCRIPTION |
The conversation has already been terminated. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9049:ERROR |
Invalid task switch for Service Context <correlator>, from <task1> to <task2> |
|
|
|
DESCRIPTION |
An internal protocol violation has occurred. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9050:ERROR |
Transformer creation failed for inbound transaction <trancode> |
|
|
|
DESCRIPTION |
An internal error has occurred. Possibly out of memory. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9051:ERROR |
Transformer failed for inbound transaction <trancode> |
|
|
|
DESCRIPTION |
An internal error has occurred. Resource name is not present. Mainframe compatibility problem. |
|
|
ACTION |
Contact BEA Customer Support. |
|
9052:WARNING |
Inter-task Message dropped (<verbname>), parm=<parm> From: <task1> to <task2> |
|
|
|
DESCRIPTION |
An internal message between two tasks has been dropped. |
|
|
ACTION |
None. This message is for information only. |
|
9053:ERROR |
Attempt to send <nnnnn> bytes (> 32767) |
|
|
|
DESCRIPTION |
The length of a send request exceeded 32767 (including overhead). |
|
|
ACTION |
Check application program and correct. |
|
9054:ERROR |
Allocation Failure for <trancode> on <remotesysid>: <error> |
|
|
|
DESCRIPTION |
An Allocation error occurred. |
|
|
ACTION |
The reason for the failure is described by <error>. Correct problem with configuration or application. |
|
9055:ERROR |
Invalid Exchange Logs GDS variable received from <remotesysid> |
|
|
|
DESCRIPTION |
The log files for the SNACRM have been incorrectly modified. |
|
|
ACTION |
Run CRMLOGS to examine the SNACRM log file. Cold start the Tuxedo application. |
|
9056:ERROR |
Invalid cold start received from <remotesysid>. Unrecovered local transactions are pending. |
|
|
|
DESCRIPTION |
Attempting to cold start host while warm starting Tuxedo. |
|
|
ACTION |
Run CRMLOGS to examine the SNACRM log file. Cold start the Tuxedo application. |
|
9057:ERROR |
Invalid warm start received from <remotesysid>. Unknown log name. |
|
|
|
DESCRIPTION |
The log files for the SNACRM have been incorrectly modified. |
|
|
ACTION |
Run CRMLOGS to examine the SNACRM log file. Cold start the Tuxedo application. |
|
9058:ERROR |
Invalid Compare States GDS variable received from <remotesysid> |
|
|
|
DESCRIPTION |
The log files for the SNACRM have been incorrectly modified. |
|
|
ACTION |
Run CRMLOGS to examine the SNACRM log file. Cold start the Tuxedo application. |
|
9059:ERROR |
Mixed Heuristic on link <linkref> for <unitofwork> Correlator [<correlator>] |
|
|
|
DESCRIPTION |
One side has reported committed while the other side has reported aborted. |
|
|
ACTION |
Check the ULOG for any additional messages. |
|
9060:WARNING |
Inbound Exchange Logs Rejected for <remotesysid> |
|
|
|
DESCRIPTION |
Link not configured for sync level 2. |
|
|
ACTION |
None. This message is for information only. |
|
9061:WARNING |
Link <linkref> not configured for synclevel 2 |
|
|
|
DESCRIPTION |
Link specified by <linkref> is not configured for sync level 2. |
|
|
ACTION |
None. This message is for information only. |
|
9062:ERROR |
Exchange Logs Rejected for <remotesysid>, Restart Type or Log Name Mismatch |
|
|
|
DESCRIPTION |
The log files for the SNACRM have been incorrectly modified. |
|
|
ACTION |
Run CRMLOGS to examine the SNACRM log file. Cold start the Tuxedo application. |
|
9063:ERROR |
Exchange Logs failed with <linkref> |
|
|
|
DESCRIPTION |
An error occurred during the exchange logs process. |
|
|
ACTION |
Run CRMLOGS to examine the SNACRM log file. Cold start the Tuxedo application. |
|
9064:ERROR |
Invalid initial syncpoint received from subordinate, %s |
|
|
|
DESCRIPTION |
An internal error has occurred during the commit process. XA does not support syncpoints originating from subordinate members. |
|
|
ACTION |
Contact BEA Customer Support |
|
|
|
|
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|