![]() |
![]() |
|
|
| |
Traps MIB
The event monitor feature of the Tuxedo and WebLogic Enterprise systems detects and reports certain predefined events—primarily failures of which a system operator should be aware. BEA SNMP Agent on the master node subscribes to all system events and generates a corresponding SNMP trap notification whenever any of these events occur. The enterprise ID used for these traps is .1.3.6.1.4.1.140.tuxedo, where tuxedo is 300. For BEA SNMP Agent to receive Tuxedo or WebLogic Enterprise system events, the Tuxedo/WLE system EventBroker (TMSYSEVT) must be running because that is the entity that generates the system events.
The Event Traps MIB defines all the traps that are generated and the objects that are passed in the variable bindings for these traps. The following sections describe the cause and recommended action for each event:
Specific Trap Number
Each enterprise-specific trap notification generated by BEA SNMP Agent has a value in the specific trap ID field of the SNMP trap packet that identifies the Tuxedo or WebLogic Enterprise event. For each trap listed in this chapter, "Trap ID" is the specific trap number that is sent in the trap packet.
Variable Bindings
SNMP trap notifications generated by BEA SNMP Agent contain 12 variables (variable/value pairs) in the variable bindings of the trap packet:
The tuxEventTrapVars group contains all objects that are sent as a part of the variable bindings of the traps generated in relation to Tuxedo or WebLogic Enterprise system events, as defined in EVENTS.
tuxEventsName
Syntax
DisplayString
Access
not-accessible
Description
A string that uniquely identifies this event. All system-generated events begin with .Sys.
tuxEventsSeverity
Syntax
INTEGER { Error(1), Warn(2), Infor(3) }
Access
not-accessible
Description
Indicates the severity of the system event.
tuxEventsLmid
Syntax
DisplayString ( SIZE(1..30) )
Access
not-accessible
Description
A string that identifies the machine where the event was detected.
tuxEventsTime
Syntax
INTEGER
Access
not-accessible
Description
A long integer containing the event detection time, in seconds, according to the clock on the machine where detection took place.
tuxEventsUsec
Syntax
INTEGER
Access
not-accessible
Description
A long integer containing the event detection time, in microseconds, according to the clock on the machine where detection took place. While the units of this value are always microseconds, the actual resolution depends on the underlying operating system and hardware.
tuxEventsDescription
Syntax
DisplayString
Access
not-accessible
Description
A one-line string summarizing the event.
tuxEventsClass
Syntax
DisplayString
Access
not-accessible
Description
The class of the object associated with the event. Depending on TA_CLASS, the event notification buffer can contain additional fields specific to an object of this class.
tuxEventsUlogCat
Syntax
DisplayString
Access
not-accessible
Description
Catalog name from which the message was derived, if any.
tuxEventsUlogMsgNum
Syntax
INTEGER
Access
not-accessible
Description
Catalog message number, if the message was derived from a catalog.
tuxTdomainID
Syntax
DisplayString (SIZE (0..30))
Access
not-accessible
Description
Domain identification string. Refer to Core MIB.
tuxTdomainKey
Syntax
INTEGER (32769..262143)
Access
not-accessible
Description
Numeric key for the well-known address in a Tuxedo/WLE system bulletin board. In a single processor environment, this key "names" the bulletin board. In a multiple processor or LAN environment, this key names the message queue of the DBBL. In addition, this key is used as a basis for deriving the names of resources other than the well-known address, such as the names for bulletin boards throughout the application. Refer to Core MIB.
beaLogicalAgentName
Syntax
DisplayString
Access
not-accessible
Description
The logical name of the agent as provided in the -l option (service name in case of Windows NT) when the agent was started. This object value is the agent that is monitoring this domain. If there are multiple SNMP agents running on a managed node, this name needs to be appended to the community with an @ sign to get the MIB values from the appropriate agent. For example, if there are two logical agents, simp_snmpd and bank_snmpd, the communities used to query values from these agents would be public@simp_snmpd and public@bank_snmpd respectively. The component after the @ sign is used to identify the agent to which the MIB query is to be sent.
This object is passed in the variable binding of all SNMP traps generated on behalf of Tuxedo/WLE system events.
Note: To run multiple SNMP agents on the same managed node, they must be started as subagents (without -s option) and run after starting the BEA SNMP Agent Integrator.
Trap Definitions
The following sections define all the traps generated by BEA SNMP Agent when system events occur:
DOMAIN Traps
The Domain Traps group defines the Tuxedo/WLE domain specific event traps.
resourceConfigTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysResourceConfig occurs. It denotes a system configuration change.
Action
This message is informational.
Trap ID
1
MACHINE Traps
The Machine Traps group defines the Tuxedo/WLE machine specific event traps.
machineBroadcastTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName}
Description
This trap is generated when .SysMachineBroadcast occurs. It denotes broadcast delivery failure. This message indicates that tpbroadcast() failed for at least one accesser on the LMID of the application.
Action
Since the broadcast messages are sent in no-blocking mode, it is possible that the process doing the broadcasting encountered a blocking condition and dropped a message. Configure larger message queues or load-balance clients and servers such that excessive load is not put on some machines.
Trap ID
2
machineConfigTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysMachineConfig occurs. It denotes a change in a particular machine configuration.
Action
This message is informational.
Trap ID
3
machineFullMaxAccessersTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysMachineFullMaxaccessers occurs. This message indicates that the given LMID reached the capacity limit on the number of accessers.
Action
Increase the MAXACCESSERS value for the particular machine. Or, if the hardware/software limits have been reached for the maximum number of users on the machine, move additional users to other machines.
Trap ID
4
machineFullMaxConvTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysMachineFullMaxconv occurs. This message indicates that the given LMID reached the capacity limit on the number of concurrent conversations.
Action
Increase the value of MAXCONV for the particular machine to the point that this event is not generated.
Trap ID
5
machineFullMaxGttTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysMachineFullMaxgtt is raised. This message indicates that the given machine reached the capacity limit on the number of concurrent transactions.
Action
Increase the value of MAXGTT for the particular machine to the point that this event is not generated.
Trap ID
6
machineFullMaxWsClientsTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysMachineFullMaxwsclients is raised. This message indicates that the given machine reached the capacity limit on the number of workstation clients.
Action
Increase the value of MAXWSCLIENTS for the particular machine to the point that this event is not generated.
Trap ID
7
machineMsgQTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysMachineMsgq occurs. This message indicates that the server posting a message encountered a blocking condition while putting a message on the message queue.
Action
Configure larger message queues and/or distribute the load equally on all the machines.
Trap ID
8
machinePartitionedTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName}
Description
This trap is generated when .SysMachinePartitioned occurs. This message indicates that DBBL partitioned the stated machine either because the BBL on the machine is slow or the network link between the master and the machine is broken.
Action
This can occur due to several reasons:
The software is capable of unpartitioning the machine if things stabilize.
Trap ID
9
machineSlowTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName}
Description
This trap is generated when .SysMachineSlow occurs. This message indicates that BBL on the non-master machine is slow in generating IAMOK messages. These messages are sent periodically from BBLs to the DBBL that helps the DBBL maintain the pulse of the system.
Action
This can occur due to several reasons:
This problem can be intermittent.
Trap ID
10
machineStateTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysMachineState occurs. This denotes that a particular machine changed its state.
Action
This message is informational.
Trap ID
11
BRIDGE Traps
The Bridge Traps group defines the Tuxedo/WLE bridge specific traps.
networkConfigTrap
Enterprise
tuxedo
Variables
{tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysNetworkConfig occurs. This message indicates the network link between the two machines specified changed to a new state.
Action
This message is informational.
Trap ID
12
networkDroppedTrap
Enterprise
tuxedo
Variables
{tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysNetworkDropped occurs. This message indicates the network link between the two machines specified was dropped abnormally.
Action
This can happen either because the BRIDGE on either machine died or one of the machines crashed.
Trap ID
13
networkFailureTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysNetworkFailure occurs. This indicates a network connection failure between BRIDGE processes.
Action
This can happen either because the BRIDGE on remote machine died or the remote machine itself crashed.
Trap ID
14
networkFlowTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysNetworkFlow occurs. This message states that the virtual circuit between machines changed to a new state.
Action
This message is informational.
Trap ID
15
networkStateTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName}
Description
This trap is generated when .SysNetworkState occurs. This message indicates that the server died abnormally and BBL cleaned up the slot allocated by the server.
Action
Debug the server and fix the problem before the server is restarted.
Trap ID
16
SERVER Event Traps
The Server Traps group defines the Tuxedo/WLE server specific traps.
serverCleaningTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysServerCleaning occurs. This message indicates that the server died abnormally and BBL cleaned up the slot allocated by the server.
Action
Debug the server and fix the problem before the server is restarted.
Trap ID
17
serverConfigTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName}
Description
This trap is generated when .SysServerConfig occurs. This message indicates that the configuration parameters for the server have been updated.
Action
This message is informational.
Trap ID
18
serverDiedTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysServerDied occurs. This message indicates that the server died abnormally and the BBL detected this condition in its periodic scan of the BB.
Action
Debug the server and fix the problem before the server is restarted.
Trap ID
19
serverInitTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName}
Description
This trap is generated when .SysServerInit occurs. This message indicates that the server specified above failed in tpsvrinit() and therefore could not be booted.
Action
Fix the problem and then reboot the server. This problem might be due to a Tuxedo/WLE resource limit or an application-specific problem.
Trap ID
20
serverMaxgenTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysServerMaxgen occurs. This message indicates that the server died abnormally. Since the server has been marked as restartable, it has been restarted MAXGEN-1 times in the specified GRACE period.
Action
Tuxedo/WLE application servers should not die abnormally. If this happens, it is most likely due to an application-specific problem. Debug the server and resolve the problem before restarting the server.
Trap ID
21
serverRestartingTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysServerRestarting occurs.. This message indicates that the server died abnormally. Since this has been marked as a restartable server, it has been restarted.
Action
Tuxedo/WLE application servers should not die abnormally. If this happens, it is most likely due to an application-specific problem. Debug the server and resolve the problem before restarting the server.
Trap ID
22
serverStateTrap
Enterprise
tuxedo
Variables
{tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysServerState occurs. This message indicates that the server changed state.
Action
This message is informational.
Trap ID
23
serverTpExitTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysServerTpexit occurs. This message indicates that the server received a request and the service routine code did a tpreturn(TPEXIT) while the server was executing application-specific code.
Action
This message is informational.
Trap ID
24
CLIENT Traps
The Client Traps group defines the Tuxedo/WLE client-specific traps.
clientConfigTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysClientConfig is raised. This denotes that a particular user on a machine changed its configuration.
Action
This message is informational.
Trap ID
25
clientDiedTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysClientDied occurs. This message indicates that the client exited the application without doing a tpterm(). Normally, clients should do a tpterm() before exiting the application.
Action
This message is informational.
Trap ID
26
clientSecurityTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime,
tuxEventsUsec, tuxEventsDescription, tuxEventsClass,
tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysClientSecurity occurs. This message indicates that the client failed security validation when trying to join the application.
Action
Check to make sure that this is not an unauthorized user trying to gain access to your application data.
Trap ID
27
clientStateTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName}
Description
This trap is generated when .SysClientState occurs. This message indicates that a particular client on a machine changed state.
Action
This message is informational.
Trap ID
28
TRANSACTION Traps
The Transaction Traps group defines the Tuxedo/WLE transaction-specific traps.
transHeuristicAbortTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysTransactionHeuristicAbort occurs. This message indicates that the database in a particular group performed an heuristic abort on a transaction.
Action
Check to make sure that the coordinator of the transaction is still running.
Trap ID
29
transHeuristicCommitTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysTransactionHeuristicCommit occurs. This message indicates that the database in a particular group performed an heuristic commit on a transaction.
Action
Check to make sure that the coordinator of the transaction is still running.
Trap ID
30
EVENT Traps
The Event Traps group defines the Tuxedo/WLE event specific traps.
eventDeliveryTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysEventDelivery occurs. This message indicates that the event server failed to perform at least one notification for a posted event.
Action
Check to make sure that the notifications specified in the subscriptions that match the posted event are doable.
Trap ID
31
eventFailureTrap
Enterprise
tuxedo
Variables
{ tuxEventsName, tuxEventsSeverity, tuxEventsLmid, tuxEventsTime, tuxEventsUsec, tuxEventsDescription, tuxEventsClass, tuxEventsUlogCat, tuxEventsUlogMsgNum, beaDomainId, beaDomainKey, beaLogicalAgentName }
Description
This trap is generated when .SysEventFailure occurs. The system event server periodically sends a message to itself to detect blocking conditions on the message queues. This event is generated if the server cannot put a message on the queue in no-block mode. It can also be generated if the received message does not match what was sent out earlier. The second possible case is very unlikely. This denotes a system event monitor subsystem failure on a particular host.
Action
Configure larger message queues or distribute the load in the application equally among all the machines.
Trap ID
32
![]() |
![]() |
|
Copyright © 2001 BEA Systems, Inc. All rights reserved.
|