Corporate Info  |  News  |  Solutions  |  Products  |  Partners  |  Services  |  Events  |  Download  |  How To Buy
	http://www.oracle.com/technology/documentation/index.html   |   Site Map   |   Search   |   PDF Files   |   Contact   |   Glossary
Tuxedo Doc Home   |   Messages   |   Catalog List   |   Previous   |   Next

CMDTUX Messages 1200-1299

1201	ERROR: *ROUTING entry entry_name does not meet the requirement that the lower limit of every range must be less than or equal to the upper limit
	Description	The value specified in the first part of a range entry must be less than or equal to the value specified in the second part of a range entry. The value specified in the first part of the range entry was greater than the value specified in the second part of a range entry.
	Action	Recode the range entry so that the first value specified is less than or equal to the second value.
	See Also	ubbconfig(5)
1202	ERROR: *ROUTING entry entry_name needs a single quote at the end of a character string
	Description	In a routing entry, a double quote was found after an odd number of non-escaped single quotes.
	Action	Inspect the single quotes in the flagged routing entry to ensure the proper format.
	See Also	ubbconfig(5)
1203	ERROR: or a backslash to escape a double quote.
	Description	This message is printed as the second part of message 1202. The routing entry entry_name lacks a single quote at the end of a character string, or lacks a backslash to escape a double quote within a character string.
	Action	This message is printed as the second part of message 1202. Examine the routing field flagged as being in error. Make sure that the RANGES string starts and ends with a double quote, and that the previous string in the configuration file was properly terminated with a double quote. Remember that any double quote character to be taken literally as part of a range limit must be preceded by a backslash. Examine each string range value within the RANGES field, and verify that it starts and ends with a single quote. Remember that any single quote character to be taken literally as part of a range limit must be preceded by two backslashes. Correct all errors in the format of the routing information, and reload the configuration file.
	See Also	ubbconfig(5)
1204	ERROR: *ROUTING entry entry_name has both numeric and character values in the RANGES statement
	Description	The ROUTING entry entry_name has both numeric and character values in the RANGES statement. This is not allowed.
	Action	The values specified in the RANGES statement must be appropriate to the type of the field on which routing is being conducted. Look in the field tables to determine the type of the field listed for this routing entry and change any routing values which are inappropriate for this field type.
	See Also	ubbconfig(5)
1205	ERROR: *ROUTING entry entry_name mixes a numeric value with a string value in a RANGES statement
	Description	The specified entry in the ROUTING section of the UBBCONFIG file contains a RANGES entry in which one part of a range is a numeric quantity and the other part of that range is a string category. This is not allowed.
	Action	Modify the RANGES element flagged as being in error so that all range limits are of the same type and match the type defined for the field being routed on. Reload the configuration file.
	See Also	ubbconfig(5)
1206	ERROR: *ROUTING entry entry_name contains an invalid group name grpname
	Description	A group specified in the RANGES parameter for the specified ROUTING section entry was not defined in the GROUPS section.
	Action	Make sure that the grpname flagged as being in error is defined in the GROUPS section of the UBBCONFIG file. Check that the two names are spelled the same way. Also, examine any previous error reported by tmloadcf that may have caused the corresponding entry in the GROUPS section to not be recognized.
	See Also	ubbconfig(5)
1207	ERROR: *ROUTING entry entry_name contains an invalid RANGES value.
	Description	The ROUTING entry specified contains a RANGES value that does not follow the required format.
	Action	Fix the format of the flagged RANGES entry. Often, the format error will be due to a range whose first value does not start with MIN, a number, or a single quote, a range whose second value does not start with MAX, a number, or a single quote, a range which is not followed by a colon, or a server group name which is not followed by a comma or a double quote to terminate the RANGES entry.
	See Also	ubbconfig(5)
1208	ERROR: *ROUTING entry entry_name specifies an illegal BUFTYPE of ALL
	Description	The ROUTING table entry flagged in the error message has a BUFTYPE of ALL. This is not allowed.
	Action	Specify a specific buffer type for the routing table entry in error, and reload the configuration file.
	See Also	ubbconfig(5)
1209	ERROR: Buffer types in section_name entry entry_name start with ',' or null
	Description	The BUFTYPE list specified in an entry in the SERVICES section or in the ROUTING section of the UBBCONFIG file starts with a comma, or is equal to the null string. This is not allowed.
	Action	Ensure that at least one valid buffer type is specified in the BUFTYPE string, and make sure that the string does not begin with a comma. When the error has been fixed, reload the configuration file.
	See Also	ubbconfig(5)
1210	ERROR: section_name entry entry_name contains a null buffer type name
	Description	The BUFTYPE parameter specified in the ROUTING section or SERVICES section contains one or more null buffer type names.
	Action	Change the BUFTYPE entry flagged as being in error. Make certain that the beginning of the BUFTYPE string specifies a valid buffer type identifier, and that the string does not start with a punctuation mark. Also, make sure that each semicolon in the BUFTYPE string is followed by a valid buffer type identifier. Reload the configuration file.
	See Also	ubbconfig(5)
1211	ERROR: section_name entry entry_name contains an unexpected comma
	Description	The BUFTYPE parameter specified in the ROUTING section or SERVICES section of the UBBCONFIG file contains an unexpected comma.
	Action	Change the BUFTYPE entry flagged as being in error. The only places where commas are allowed to occur in BUFTYPE entries are between entries of a list of multiple subtypes of a particular type. When the error has been fixed, the configuration file should be reloaded.
	See Also	ubbconfig(5)
1212	ERROR: section_name entry entry_name contains an excessively long type name type_name
	Description	One of the buffer type names specified in the BUFTYPE parameter of a SERVICES section or ROUTING section entry of the UBBCONFIG file exceeds the maximum allowed length. The maximum allowed length of a buffer type name is 8 bytes.
	Action	Change the buffer type name so that it is no longer than 8 bytes, and reload the configuration file.
	See Also	ubbconfig(5)
1214	ERROR: section_name entry entry_name contains an unexpected colon or comma
	Description	The BUFTYPE parameter specified in an entry in the ROUTING section or SERVICES section of the UBBCONFIG file contains an unexpected colon or comma.
	Action	Examine the BUFTYPE entry flagged as being in error to determine the exact problem. A colon may occur only between a name of a type and the name of the first acceptable subtype. A comma may occur only between names of subtypes. When the error has been corrected, reload the configuration file.
	See Also	ubbconfig(5)
1215	ERROR: section_name entry entry_name contains a null buffer subtype name
	Description	The BUFTYPE parameter specified in an entry in the ROUTING section or SERVICES section of the UBBCONFIG file contains a null buffer subtype name. This may occur when a colon or comma is followed by another punctuation mark without any intervening subtype name.
	Action	Fix any subtype list which ends in a comma. Specify one or more subtypes for any type which requires a subtype, and do not follow any type which does not accept subtypes with a colon. When done, reload the configuration file.
	See Also	ubbconfig(5)
1216	ERROR: section_name entry entry_name contains excessively long subtype name subtype_name
	Description	One of the buffer subtype names specified in the BUFTYPE parameter of a SERVICES section or ROUTING section entry of the UBBCONFIG file exceeds the maximum allowed length. The maximum allowed length of a buffer subtype name is 16 bytes.
	Action	Change the buffer subtype name so that it is no longer than 16 bytes, and reload the configuration file.
	See Also	ubbconfig(5)
1217	ERROR: section_name entry entry_name specified both '*' and a specific subtype name
	Description	A subtype list contained within the BUFTYPE parameter of a SERVICES section or ROUTING section entry of the UBBCONFIG file specified both the wild-card subtype "*" and a specific subtype name. This is not allowed.
	Action	If the application should accept all subtype names, specify "*" without specifying any specific subtype names. If the application should accept only specific subtype names, remove "*" from the list of subtype names. When the change has been made, reload the configuration file.
	See Also	ubbconfig(5)
1218	ERROR: *ROUTING entry entry_name specifies '*' where it is not allowed
	Description	The BUFTYPE parameter of a ROUTING section entry of the UBBCONFIG file specified '*' as a buffer subtype. This is not allowed.
	Action	If routing on a view, specify the specific buffer type to be routed on. If routing on an FML buffer, no buffer subtypes are allowed. Reload the configuration file once it has been modified.
	See Also	ubbconfig(5)
1221	ERROR: section_name entry entry_name contains a duplicate type(type_name)/subtype(subtype_name) pair
	Description	The BUFTYPE parameter of a SERVICES section entry or ROUTING section entry in the UBBCONFIG file specified duplicate type/subtype pairs. (For types without any subtype specified, the BUFTYPE parameter specified duplicate type pairs.)
	Action	Modify the BUFTYPE parameter so that the same type/subtype pair is not specified more than once. Reload the configuration file.
	See Also	ubbconfig(5)
1225	ERROR: *SERVICES entry entry_name does not have the same BUFTYPE for all entries of this service.
	Description	If multiple entries exist in the SERVICES section with the same service name but with different SRVGRP parameters, the BUFTYPE parameter must be the same for all of the entries. This rule was violated for the service entry named in the error message.
	Action	Specify the same BUFTYPE parameters for all instances of a particular service name. Then reload the configuration file.
	See Also	ubbconfig(5)
1228	ERROR: section entry service must have the same BUFTYPE for all *SERVICE entries
	Description	If a service has multiple entries in the SERVICES section (for different SRVGRP parameters), all entries must have the same BUFTYPE parameter.
	Action	Modify all entries for service so that the BUFTYPE parameter is consistent.
	See Also	ubbconfig(5)
1229	ERROR: section entry service too many buffer type/subtypes specified
	Description	The maximum number of type/subtype combinations that a service can accept was exceeded.
	Action	This is a fixed limit that requires a recompiled BEA TUXEDO system version to increase. Contact your BEA TUXEDO system Technical Support. Other options are: Reduce the number of type/subtype combinations by using "*" for a subtype wildcard. Have the server process call tptypes() on its input buffer, and enforce its own rules concerning allowed buffer type/subtype combinations.
	See Also	tptypes(3c), ubbconfig(5)
1231	ERROR: Unable to get user id
	Description	While executing tmconfig, the program was unable to get the password entry based on the current user identifier.
	Action	Make sure that a password entry exists for the administrator who is running the tmconfig command. Contact your BEA TUXEDO system Technical Support.
	See Also	tmconfig(1)
1232	ERROR: tpchkauth failed - Uunixerr = code
	Description	While executing tmconfig, an operating system error occurred while attempting to determine the level of authentication required by the application configuration. A code is printed indicating the specific UNIX System call which failed. These codes may be referenced in the header file <Uunix.h>.
	Action	Attempt to determine why the UNIX System call is failing. Often, this error will occur if the TUXCONFIG shell variable is not set consistently in this process and the rest of the application.
	See Also	tmconfig(1), tpchkauth(3c)
1233	ERROR: Cannot determine authentication level
	Description	The tpchkauth() function returned an error when called by tmconfig to determine the level of authentication required by the application configuration.
	Action	Attempt to determine why the tpchkauth() function call is failing. Often, this will be due to an incorrect setting of the TUXCONFIG shell variable.
	See Also	tmconfig(1), tpinit(3c)
1237	ERROR: Can't open filename
	Description	When writing out the current buffer values, tmconfig was unable to create and open a temporary file for writing (in the current directory for DOS, or /tmp for BEA TUXEDO system).
	Action	Check that the directory has write and execute permissions set correctly, and that the file system has the proper resources for creating and writing a file.
	See Also	tmconfig(1)
1267	ERROR: Cannot start/stop servers, Memory allocation failure
	Description	An attempt to dynamically allocate memory from the operating system using realloc() failed while creating an internal data structure related to TMS boot or shutdown.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. A temporary work-around is to require less space by booting or shutting down one machine, group, or server at a time.
	See Also	tmboot(1)
1268	ERROR: GROUP entry, group TMS specified and LMID, lmid does not have TLOGDEVICE
	Description	If any group on a machine has a TMS specified, the TLOGDEVICE parameter in the MACHINES section must be set.
	Action	Modify the configuration file.
	See Also	ubbconfig(5)
1270	ERROR: Could not establish network address - check device and address
	Description	The BRIDGE process could not establish its listening address for incoming network connections.
	Action	Check the NADDR and BRIDGE parameters for this machine in the NETWORK section of the configuration file.
	See Also	ubbconfig(5), NETWORK section
1271	ERROR: Invalid BRIDGE device pathname
	Description	The BRIDGE process' networking device pathname is set incorrectly, or the device does not exist.
	Action	Modify the BRIDGE parameter for this machine in the configuration file's NETWORK section.
	See Also	ubbconfig(5), NETWORK section
1273	ERROR: Invalid option string for SECURITY keyword
	Description	The SECURITY parameter in the RESOURCES section of the configuration file is invalid.
	Action	Modify the configuration file.
	See Also	ubbconfig(5)
1275	ERROR: Cannot create encryption key
	Description	An unexpected error occurred when attempting to create a randomly generated encryption key.
	Action	Contact your BEA TUXEDO system Technical Support.
1276	ERROR: Cannot create encryption schedule for application password
	Description	An unexpected error occurred when attempting to encrypt the application security password.
	Action	Contact your BEA TUXEDO system Technical Support.
1277	ERROR: Unable to encrypt application password
	Description	An unexpected error occurred when attempting to encrypt the application security password.
	Action	Contact your BEA TUXEDO system Technical Support.
1278	ERROR: Could not create security key database directory path error number
	Description	A directory to hold encrypted security key information could not be created.
	Action	Verify that APPDIR exists, and that directory permissions will allow tmloadcf to create a subdirectory there. Verify that the APPDIR's file system has free disk blocks and inodes.
	See Also	ubbconfig(5), MACHINES section
1279	ERROR: Invalid file type for security key database directory path
	Description	A directory necessary to hold encrypted security key information could not be created because a file exists with the same path name.
	Action	Remove a file named .adm in the APPDIR directory.
	See Also	ubbconfig(5), MACHINES section
1280	ERROR: Cannot change permissions of security key database directory path errno = errno_val
	Description	The access permissions of a directory necessary to hold encrypted security key information could not be modified.
	Action	Change ownership of the subdirectory named .adm in the APPDIR directory to the administrative UID.
	See Also	ubbconfig(5), MACHINES section
1281	ERROR: Cannot open security key database file for writing, path pathname errno = errno_val
	Description	tmloadcf could not open a file (for writing, with create option) necessary to hold encrypted security key information.
	Action	Verify that the APPDIR 's file system has free disk blocks and inodes. In the APPDIR directory, remove a subdirectory named .adm and all files contained in it. Then run tmloadcf again.
	See Also	ubbconfig(5), MACHINES section
1282	ERROR: Cannot write to security key database file path errno = errno_val
	Description	tmloadcf could not write a file necessary to hold encrypted security key information.
	Action	Verify that the APPDIR 's file system has free disk blocks and inodes. In the APPDIR directory, remove a subdirectory named .adm and all files contained in it. Then run tmloadcf again.
	See Also	ubbconfig(5), MACHINES section
1283	ERROR: Could not create directory for security key database
	Description	The tagent process could not create a directory necessary to hold encrypted security key information.
	Action	Verify that APPDIR exists, and that directory permissions will allow the tagent process to create a subdirectory there. Verify that the APPDIR 's file system has free disk blocks and inodes.
	See Also	ubbconfig(5), MACHINES section
1284	ERROR: Invalid file type for security key database directory
	Description	The tagent process could not create a directory necessary to hold encrypted security key information, because a file exists with the same path name.
	Action	Remove a file named .adm in the APPDIR directory.
	See Also	ubbconfig(5), MACHINES section
1285	ERROR: Cannot change permissions of security key database directory
	Description	The tagent process could not change the permissions of a directory necessary to hold encrypted security key information.
	Action	Change ownership of the subdirectory named .adm in the APPDIR directory to the administrative UID.
	See Also	ubbconfig(5), MACHINES section
1286	ERROR: Cannot open security key database file for writing
	Description	The tagent process could not open a file (for writing, with create option) necessary to hold encrypted security key information.
	Action	Verify that the APPDIR 's file system has free disk blocks and inodes. In the APPDIR directory, remove a subdirectory named .adm and all files contained in it.
	See Also	ubbconfig(5), MACHINES section
1287	ERROR: Cannot write to security key database file
	Description	The tagent process could not write a file necessary to hold encrypted security key information.
	Action	Verify that the APPDIR 's file system has free disk blocks and inodes. In the APPDIR directory, remove a subdirectory named .adm and all files contained in it.
	See Also	ubbconfig(5), MACHINES section
1288	ERROR: Security key encryption error
	Description	There was an encryption problem when the tagent was setting up the security key database files.
	Action	Contact your BEA TUXEDO system Technical Support.