![]() |
![]() |
|
|
100 |
ERROR: Class class is not writable by this user | |
|
Description |
A |
Action |
In cases where the information is not intended to be writable by the invoking user, this message is informational only and there is no action to be taken. If the administrator intended the user to have write access to the indicated class, then the permissions on the class need to be relaxed by setting appropriate permissions values via the | |
See Also |
| |
102 |
ERROR: Unrecognized flags bits set on request | |
|
Description |
Flag values other than those documented in the reference pages have been specified. |
Action |
Correct the request to contain only documented flag values. | |
See Also |
| |
103 |
ERROR: Could not create child process to perform blocking admin function | |
|
Description |
The UNIX System call |
Action |
Check the operating system tunable parameters to make sure a sufficient number of processes may be started overall and by one user. Reconfigure the kernel if necessary. | |
See Also |
| |
104 |
ERROR: Invalid or unspecified TUXCONFIG environment value | |
|
Description |
The |
Action |
Set the | |
See Also |
| |
105 |
ERROR: Unable to map machine identifiers in configuration file tuxconfig | |
|
Description |
The TUXCONFIG file has been corrupted or is being accessed from a machine not configured in the application. |
Action |
Be sure that the file is being accessed from a machine that is configured in the application. If it is, then the file has likely become corrupted. In this case, remove the configuration file and regenerate it before continuing. | |
See Also |
| |
106 |
ERROR: Unbooted configuration attempted on non-master site | |
|
Description |
Unbooted configuration via the |
Action |
Login to the master machine to do unbooted configuration or wait until the local machine is activated and access the /AdminAPI via | |
See Also |
| |
107 |
ERROR: Configuration file tuxconfig is in an invalid state | |
|
Description |
The tuxconfig file accessed by |
Action |
Remove the tuxconfig file and regenerate it from scratch before continuing. | |
See Also |
| |
108 |
ERROR: May not SET classes other than T_DOMAIN in an unconfigured application | |
|
Description |
A |
Action |
Configure the | |
See Also |
| |
109 |
ERROR: Failed to initialize internal MIB data structures | |
|
Description |
A call to |
Action |
Consult the local userlog file for additional information on the failure. Messages found there will have catalog names and numbers that will indicate the cause and action for the underlying failure. | |
See Also |
| |
110 |
ERROR: Could not open temporary file tmpfile for writing | |
|
Description |
The temporary file name tmpfile could not be opened for writing while attempting to process a |
Action |
Check the temporary file directory to be sure it is writable by the calling user and change the mode on the directory if necessary. | |
See Also |
| |
111 |
ERROR: Could not write to temporary file tmpfile | |
|
Description |
The temporary file name tmpfile could not be written to while attempting to process a |
Action |
Make sure that sufficient disk space is available on the filesystem where the temporary file is being written. | |
See Also |
| |
112 |
ERROR: Cannot set backup master on initial configuration | |
|
Description |
A |
Action |
Create the configuration with only a master machine (no backup specified), then configure the machine you want to be the backup machine and then you can change the setting of | |
See Also |
| |
113 |
ERROR: ACCSTATS may not be set in an inactive application | |
|
Description |
A |
Action |
Activate the application before attempting to set this attribute value | |
See Also |
| |
114 |
WARN: Partial deletion of configuration tables | |
|
Description |
A |
Action |
Remove the binary configuration file manually. | |
See Also |
| |
115 |
ERROR: Cannot invalidate T_ROUTING instance with matching configured T_SERVICE instance | |
|
Description |
A |
Action |
Invalidate the | |
See Also |
| |
116 |
ERROR: Cannot set overlapping buffer types on identical range criteria name | |
|
Description |
A |
Action |
Eliminate the overlapping buffer types from the request. | |
See Also |
| |
117 |
ERROR: TA_CLASS/TA_OPERATION combination invalid for current system state | |
|
Description |
An /AdminAPI request passed to |
Action |
Call | |
See Also |
| |
118 |
ERROR: TA_PASSWORD not correctly preprocessed | |
|
Description |
A |
Action |
Call | |
See Also |
| |
119 |
ERROR: TA_PASSWORD specified without TA_SECURITY set | |
|
Description |
A |
Action |
Either turn on | |
See Also |
| |
120 |
ERROR: TA_SECURITY set without TA_PASSWORD | |
|
Description |
A |
Action |
Add a | |
See Also |
| |
121 |
ERROR: Invalid system field value specified | |
|
Description |
An invalid value for a system generated field was included in the request buffer. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
122 |
ERROR: Could not validate security information | |
|
Description |
A |
Action |
Consult the userlog on the master logical machine for more information on the failure and contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
123 |
ERROR: Inconsistent password information passed | |
|
Description |
A |
Action |
Make sure that the request buffer is properly preprocessed by | |
See Also |
| |
124 |
ERROR: Could not set password information for tmloadcf | |
|
Description |
A |
Action |
Consult the local userlog file for more information on the failure. | |
See Also |
| |
126 |
WARN: MIB mapping file file contains invalid data | |
|
Description |
file was found in the ${TUXDIR}/addonclasses directory but did not conform to the expected format for such a file. |
Action |
Contact your BEA TUXEDO system Technical Support as to whether this file should be removed or replaced. In the meantime, the reported failure does not affect core administration of the system. It may affect administration of the related add-on product temporarily until a replacement file is available. | |
See Also |
| |
127 |
WARN: Could not add class class to mapping tables, tables full | |
|
Description |
The add-on class class could not be added because the internal class mapping tables are full. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
128 |
WARN: Failed to load add-on MIB mappings | |
|
Description |
One or more failures were encountered while attempting to load add-on class mappings into the internal tables. |
Action |
Consult instance specific userlog messages for more details and contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
129 |
ERROR: Unknown class referenced | |
|
Description |
A |
Action |
Correct the | |
See Also |
| |
130 |
ERROR: Cannot set | |
|
Description |
A |
Action |
The permissions for existing attributes may be changed by removing the state change attribute from the request. | |
See Also |
| |
131 |
WARN: MIB mapping file file contains duplicate class class | |
|
Description |
The add-on class /AdminAPI mapping file file in the |
Action |
The duplicate entry is ignored. The file should be replaced or removed as recommended by your BEA TUXEDO system Technical Support. | |
See Also |
| |
132 |
ERROR: Memory allocation failure processing /Admin request svc | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
See Also |
| |
133 |
ERROR: Fielded buffer access error Ferror | |
|
Description |
DESCRIPTION Fielded buffer access error Ferror occurred while adding error information to an /AdminAPI reply buffer. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
134 |
ERROR: TA_OPERATION not found in FML32 typed buffer | |
|
Description |
Missing value for TA_OPERATION in /AdminAPI request buffer. This is a required input parameter on all /AdminAPI requests and must have a value of GET, |
Action |
Correct the input buffer to include an appropriate value for the TA_OPERATION attribute. | |
See Also |
| |
135 |
ERROR: TA_OPERATION specified (op) is invalid | |
|
Description |
Invalid value op for TA_OPERATION included in /AdminAPI request buffer. This is a required input parameter on all /AdminAPI requests and must have a value of GET, |
Action |
Correct the input buffer to include an appropriate value for the TA_OPERATION attribute. | |
See Also |
| |
136 |
ERROR: Invalid state change specified (old to new) | |
|
Description |
A |
Action |
Consult the appropriate | |
See Also |
| |
137 |
ERROR: Invalid field type fldtype for field fldid in internal structures | |
|
Description |
The internal /AdminAPI structures contain an invalid field type fldtype for the field identifier fldid. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
138 |
ERROR: FML32 error (Ferror) populating /Admin service reply buffer | |
|
Description |
An FML32 error Ferror occurred while populating the reply buffer for an /AdminAPI request. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
139 |
ERROR: System error (error) processing /Admin service request | |
|
Description |
An internal BEA TUXEDO system/T error occurred while processing an /AdminAPI request. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
140 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
See Also |
| |
141 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
See Also |
| |
142 |
ERROR: Error accessing table table of TUXCONFIG file | |
|
Description |
An error occurred accessing the table table in the binary configuration file while processing an /AdminAPI request. |
Action |
Contact your BEA TUXEDO system Technical Support | |
See Also |
| |
143 |
ERROR: Error expanding table table of TUXCONFIG file | |
|
Description |
An error occurred while attempting to expand the table table in the binary configuration file as part of processing an /AdminAPI request. |
Action |
If the configuration file is stored in a UNIX System file, then clean up the UNIX System filesystem to create additional space for the file to grow. If the configuration file is stored on a raw device, then additional extents may need to be added to allow for table expansion. | |
See Also |
Administering the BEA TUXEDO System, | |
144 |
ERROR: Fielded buffer access error (Ferror) processing /Admin request | |
|
Description |
An operation and/or value change that is not yet supported has been requested via the /AdminAPI. |
Action |
Modify the request to use only supported features. | |
See Also |
| |
145 |
ERROR: Unsupported operation/value specified | |
|
Description |
An operation and/or value change that is not yet supported has been requested via the /AdminAPI. |
Action |
Modify the request to use only supported features. | |
See Also |
| |
146 |
ERROR: Preimage failure for SET operation | |
|
Description |
A |
Action |
Modify the specified preimage to match the current class object or turn off preimage processing. | |
See Also |
| |
147 |
ERROR: Permissions violation on SET request | |
|
Description |
A permissions violation has occurred while attempting to process an /AdminAPI |
Action |
The administrator can tune permissions for any attribute user combination to the maximum supported by the system. However, write access is not supported on all attributes in all class object states. Therefore, the update may need to be delayed until the class object is in a different state. | |
148 |
ERROR: Invalid attribute value on SET request | |
|
Description |
The value specified on a |
Action |
Correct the attribute value in question to a valid value. | |
See Also |
| |
149 |
ERROR: TA_STATE specified on a SET with other changing attributes | |
|
Description |
A |
Action |
Split the request into one that changes the non-state attributes and one that changes the state. | |
See Also |
| |
150 |
ERROR: Key fields specified do not match any class instance | |
|
Description |
The key fields specified on a non state change |
Action |
Check that the key fields specified are correct. Sometimes transient objects (those that automatically disappear when they deactivate) such as | |
See Also |
| |
151 |
WARN: Extra field present on /Admin SET request ignored, class/fldname | |
|
Description |
A |
Action |
Informational message only, no action required. | |
See Also |
| |
152 |
ERROR: Required field not present on SET request | |
|
Description |
A |
Action |
Supply a value for the missing required field before regenerating the request. | |
See Also |
| |
153 |
ERROR: VTOC error accessing device | |
|
Description |
An error occurred while accessing the VTOC (Volume Table Of Contents) on the BEA TUXEDO system device device. |
Action |
device has been corrupted and needs to be destroyed and reinitialized before continuing. The device can be destroyed using | |
See Also |
| |
154 |
WARN: Timeout period expired on /Admin blocking request | |
|
Description |
A blocking /AdminAPI request timed out before the operation could be completed. The status of the operation is uncertain. |
Action |
Increase the time out interval ( | |
See Also |
| |
155 |
ERROR: Unbooted configuration update attempted in active application | |
|
Description |
A |
Action |
Either defer the update until the application is inactive or attach to the application using | |
See Also |
| |
156 |
ERROR: Could not create temporary file name | |
|
Description |
A temporary file name could not be generated for /AdminAPI processing. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
157 |
ERROR: Cannot activate class instance in an inactive application | |
|
Description |
A |
Action |
Defer activation of these class objects until the application is activated and the invoking administrative process has joined the application using | |
See Also |
| |
158 |
ERROR: TMIB service not available on site lmid for global SET operation | |
|
Description |
A |
Action |
BEA TUXEDO system sites running releases prior to 5.0 do not have the /AdminAPI service and the requested global update cannot be done while those systems are active within the application. Otherwise, the indicated machines userlog file should be examined for possible causes of the missing service. The indicated machine can be deactivated and reactivated in an attempt to make the required service available. | |
See Also |
| |
159 |
ERROR: Cannot set multiple type/subtype combinations in T_ROUTING class for an active application | |
|
Description |
A |
Action |
Split the request into one request per buffer type/subtype combination or defer the update until the application is completely deactivated. | |
See Also |
| |
160 |
ERROR: MIB_SELF not allowed for non-client/server process | |
|
Description |
The |
Action |
Remove the setting of the | |
See Also |
| |
161 |
ERROR: Could not read RESOURCES section in configuration file tuxconfig | |
|
Description |
The |
Action |
Remove and regenerate the binary configuration file before continuing. | |
See Also |
| |
162 |
ERROR: Unable to map machine identifiers in configuration file tuxconfig | |
|
Description |
The TUXCONFIG file has been corrupted or is being accessed from a machine not configured in the application. |
Action |
Be sure that the file is being accessed from a machine that is configured in the application. If it is, then the file has likely become corrupted. In this case, remove the configuration file and regenerate it before continuing. | |
See Also |
| |
163 |
ERROR: Configuration file tuxconfig is in an invalid state | |
|
Description |
The tuxconfig file accessed by |
Action |
Remove the tuxconfig file and regenerate it from scratch before continuing. | |
See Also |
| |
164 |
ERROR: May not decrease TA_MAX with active servers above new maximum | |
|
Description |
A |
Action |
Deactivate the associated servers above the new setting for | |
See Also |
| |
166 |
ERROR: Cannot change workstation handler state to | |
|
Description |
A |
Action |
Use the | |
See Also |
| |
167 |
ERROR: TA_MINHANDLERS(min) must be less than or equal to TA_MAXHANDLERS(max) | |
|
Description |
A |
Action |
Correct the request to specify a minimum value less than or equal to the maximum value. | |
See Also |
| |
168 |
ERROR: Failed to advertise dynamic /Admin service, no service name | |
|
Description |
The dynamic /AdminAPI service could not be advertised because the internal routines did not supply a service name to be associated with the function. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
169 |
ERROR: TA_MINHANDLERS may not be increased for an active T_WSL object with a TA_MAXHANDLERS value of 0 | |
|
Description |
A |
Action |
Deactivate the | |
See Also |
| |
170 |
ERROR: /Admin service svc on machine lmid unavailable | |
|
Description |
The /AdminAPI service svc is not available on logical machine lmid to satisfy the request. |
Action |
This error usually indicates that information specific to a particular site is referenced but the site is not currently active. In this case, the request should be redirected to an active site or deferred until the site in question is active. | |
See Also |
| |
171 |
ERROR: /Admin service svc unavailable | |
|
Description |
The /AdminAPI service svc is not available to satisfy the current request. |
Action |
BEA TUXEDO system sites running releases prior to 5.0 do not have the /AdminAPI service and the requested service cannot be done while those systems are active within the application. Pre-5.0 machines can be deactivated so that the request can be completed. | |
See Also |
| |
172 |
INFO: Abortively terminating WSH process pid | |
|
Description |
An /AdminAPI request to change the state of a |
Action |
Informational message only, no action required. | |
See Also |
| |
173 |
ERROR: TA_GRPNO may not be changed because of active servers in group | |
|
Description |
A |
Action |
Deactivate the remaining servers in the server group before attempting the modification. | |
See Also |
| |
175 |
WARN: Server RESTART set to Y and MAXGEN set < 2 | |
|
Description |
A |
Action |
No action is required. Normally, the | |
See Also |
|
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|