![]() |
![]() |
|
|
1500 |
ERROR: Heuristic or one-phase commit - out of queue space | |
|
Description |
While executing the qcommittrans command to heuristically commit a transaction, qmadmin was unable to record the heuristic commit because the queue space had no more room for messages. If the IPC resources for the queue space are removed before the transaction manager asks about the status of the heuristically completed transaction, the status will be lost. This can also occur if the transaction manger does a one-phase commit. If the one-phase commit is interrupted before completion, the transaction may be inconsistent. |
Action |
No action required. | |
See Also |
| |
1501 |
ERROR: Heuristic rollback - out of queue space | |
|
Description |
While executing the qrollbacktrans command to heuristically rollback a transaction, qmadmin was unable to record the heuristic rollback because the queue space had no more room for messages. If the IPC resources for the queue space are removed before the transaction manager asks about the status of the heuristically completed transaction, the status will be lost. |
Action |
No action required. | |
See Also |
| |
1507 |
ERROR: Must specify queue space name | |
|
Description |
While executing the qspacechange command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name). |
Action |
Re-enter the qspacechange command with the correct queue space name. | |
See Also |
| |
1508 |
ERROR: Queue space name length must be less than len characters | |
|
Description |
While executing the qspacechange command, the queue space name was too long (that is, len characters or more). |
Action |
Re-enter the command with a queue space name that is 15 characters or less in length. | |
See Also |
| |
1518 |
ERROR: Error queue name length must be less than len characters | |
|
Description |
While executing the qspacechange command, the error queue name was too long (that is, len characters or more). |
Action |
Re-enter the command with an error queue name that is 15 characters or less in length. | |
See Also |
| |
1522 |
ERROR: Queue space change failed | |
|
Description |
While executing the qspacechange command, qmadmin failed to change the specified queue space parameters. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog. |
Action |
Re-enter the command when the problem has been resolved. | |
See Also |
| |
1525 |
ERROR: List queue space - invalid parameter | |
|
Description |
While executing the qspacelist command, an invalid parameter was specified. The following are invalid: the device is not specified; the queue space name is not specified or is greater than 15 characters in length. |
Action |
Re-enter the command with the correct parameters. | |
See Also |
| |
1526 |
ERROR: Queue space change - invalid parameter | |
|
Description |
While executing the qspacechange command, an invalid parameter was specified. The following are invalid: the IPC key is less than or equal to 0; the number of queues, transactions, processes, or messages is less than or equal to 0; the configuration device is not specified; or the queue space name is not specified or is greater than 15 characters in length. or the extent size is less than or equal to 0. |
Action |
Re-enter the command with the correct parameters. | |
See Also |
| |
1527 |
ERROR: Queue space change - cannot lock queue space queue_space_name | |
|
Description |
While executing the qspacechange command, qmadmin failed to lock the QMCONFIG device for exclusive update. |
Action |
Check the userlog for further information about the process that has the configuration locked. Re-enter the command after the configuration has been unlocked. | |
See Also |
| |
1528 |
ERROR: Queue space create - Memory allocation failure | |
|
Description |
An attempt to dynamically allocate memory from the operating system using malloc () failed while allocating a buffer based on the specified blocking factor. |
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Reduce the blocking factor specified when creating the queue space. | |
See Also |
| |
1529 |
ERROR: Add extent - Memory allocation failure | |
|
Description |
An attempt to dynamically allocate memory from the operating system using malloc () failed while allocating a buffer based on the specified blocking factor. |
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Reduce the blocking factor specified when changing the queue space. | |
See Also |
| |
1563 |
ERROR: QMCONFIG must be an absolute pathname | |
|
Description |
The value of QMCONFIG, the device containing the queue space, as specified on the qmadmin command line or in the shell environment is not an absolute pathname, meaning it does not begin with a /. |
Action |
Specify a full pathname for the QMCONFIG environment variable or qmadmin command line argument. | |
See Also |
| |
1564 |
ERROR: Device name must be an absolute pathname | |
|
Description |
While executing the crdl command, the device name specified is not an absolute pathname, meaning it does not begin with a /. |
Action |
Re-enter the command with an absolute pathname for the device name. | |
See Also |
| |
1565 |
ERROR: Device name must be an absolute pathname | |
|
Description |
While executing the chdl command, the device name specified is not an absolute pathname, meaning it does not begin with a /. |
Action |
Re-enter the command with an absolute pathname for the device name. | |
See Also |
| |
1566 |
ERROR: Must specify queue space name | |
|
Description |
While executing the ipcrm command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name). |
Action |
Re-enter the ipcrm command with the correct queue space name. | |
See Also |
| |
1567 |
ERROR: Queue space name length must be less than len characters | |
|
Description |
While executing the ipcrm command, the queue space name was too long (that is, len characters or more). |
Action |
Re-enter the command with a queue space name that is 15 characters or less in length. | |
See Also |
| |
1568 |
ERROR: Must specify queue space name | |
|
Description |
While executing the ipcs command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name). |
Action |
Re-enter the ipcs command with the correct queue space name. | |
See Also |
| |
1569 |
ERROR: Queue space name length must be less than len characters | |
|
Description |
While executing the ipcs command, the queue space name was too long (that is, len characters or more). |
Action |
Re-enter the command with a queue space name that is 15 characters or less in length. | |
See Also |
| |
1570 |
ERROR: Must specify queue space name | |
|
Description |
While executing the qopen command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name). |
Action |
Re-enter the qopen command with the correct queue space name. | |
See Also |
| |
1571 |
ERROR: Queue space name length must be less than len characters | |
|
Description |
While executing the qopen command, the queue space name was too long (that is, len characters or more). |
Action |
Re-enter the command with a queue space name that is 15 characters or less in length. | |
See Also |
| |
1572 |
ERROR: Must specify queue space name | |
|
Description |
While executing the qspacedestroy command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name). |
Action |
Re-enter the qspacedestroy command with the correct queue space name. | |
See Also |
| |
1573 |
ERROR: Queue space name length must be less than len characters | |
|
Description |
While executing the qspacedestroy command, the queue space name was too long (that is, len characters or more). |
Action |
Re-enter the command with a queue space name that is 15 characters or less in length. | |
See Also |
| |
1574 |
ERROR: Invalid queue name | |
|
Description |
While executing the qset command, an invalid queue name was specified. |
Action |
Use the qinfo command to get a list of the existing queue names. Re-execute the command with a valid queue name. | |
See Also |
| |
1577 |
ERROR: xa_open() - failed to get enough semaphores | |
|
Description |
When opening (warm starting) a queue space, there were not enough system semaphores available. |
Action |
The qsize command can be used to compute the number of semaphores needed. Either shut down other applications that are using semaphores, or increase the operating system semaphore parameters. | |
See Also |
| |
1578 |
ERROR: Destroy queue - queue messages involved in one or more transactions | |
|
Description |
The qdestroy, command was executed while transactions are outstanding for messages on that queue (either being enqueued or dequeued). |
Action |
Re-execute the command again. It may be necessary to shut down any processes accessing the queue space. | |
See Also |
| |
1579 |
INFO: Queue list - no messages queue name | |
|
Description |
While executing the qlist command for queue name, no messages were found on the queue. |
Action |
No action required. | |
See Also |
| |
1580 |
ERROR: Queue space change - ipckey is already used -- choose another one or check existing semaphores | |
|
Description |
While executing the qspacechange command, an IPC key was specified for which a semaphore already exists. This probably means that another application is using the IPC key. |
Action |
Choose another IPC key and re-execute the command. | |
See Also |
| |
1582 |
ERROR: Change queue - invalid parameter | |
|
Description |
While executing the qchange command, an invalid parameter was specified. The following are invalid: an invalid out-of-order value; retries or delay time less than 0; the queue space name is not specified or greater than 15 characters in length; the upper threshold less than or equal to 0 or less than the lower threshold value; or an invalid threshold type or a threshold type of '%' with a upper threshold value greater than 100. |
Action |
Re-enter the command with the correct parameters. | |
See Also |
| |
1585 |
ERROR: Queue change failed for queue name | |
|
Description |
While executing the qchange command, qmadmin failed to change the specified queue. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog. |
Action |
Re-enter the command when the problem has been resolved. | |
See Also |
|
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|