Corporate Info  |  News  |  Solutions  |  Products  |  Partners  |  Services  |  Events  |  Download  |  How To Buy
	http://www.oracle.com/technology/documentation/index.html   |   Site Map   |   Search   |   PDF Files   |   Contact   |   Glossary
Tuxedo Doc Home   |   Messages   |   Catalog List   |   Previous   |   Next

WSNAT Messages 1200-1299

1200	INFO: .SysClientState: User usrname on LMID state change to state
	Description	This message indicates that the client specified above changed to a new state. A complete listing of the current attributes of the client are sent in the posted buffer.
	Action	This is an informational message.
	See Also	EVENT_MIB(5), TM_MIB(5)
1201	WARN: .SysClientSecurity: User usrname on LMID authentication failure
	Description	This message indicates that the client specified above failed security validation when trying to join the application. A complete listing of the current attributes of the client are sent in the posted buffer.
	Action	Check to make sure that this is not some hacker trying to gain access to your application data.
	See Also	EVENT_MIB(5), TM_MIB(5)
1206	ERROR: Memory allocation failure error_info
	Description	An attempt dynamically to allocate memory from the operating system failed while trying to compress a message. Additional information about the problem is printed as part of the message.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1207	ERROR: Expected numeric argument to -c option
	Description	A non-numeric argument was passed to the WSL -c option.
	Action	Change the configuration of the WSL to have a numeric compression limit.
	See Also	WSL(5)
1215	ERROR: Expected numeric argument to -k option
	Description	A non-numeric argument was passed to the WSL -k option.
	Action	Change the configuration of the WSL to have a numeric compression limit.
	See Also	WSL(5)
1216	ERROR: Expected numeric argument to -p option
	Description	The -p option to the workstation listener controls the minimum TCP port number which a workstation handler will attempt to listen. This port number must be numeric.
	Action	Change the -p option to be numeric.
1217	ERROR: Expected numeric argument to -P option
	Description	The -P option to the workstation listener controls the maximum TCP port number which a workstation handler will attempt to listen. This port number must be numeric.
	Action	Change the -P option to be numeric.
1218	ERROR: The -p (minport) or -P (maxport) option is out of range
	Description	minport must be less than or equal to maxport, and both must be less than or equal to 65535.
	Action	Change the -p or -P option to comply with the restrictions.
1219	ERROR: Memory allocation failure
	Description	While creating a data structure to keep track of TCP port numbers, the system ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1220	ERROR: Exhausted all available ports
	Description	The workstation listener has tried all TCP ports within the range specified by the -p and -P options. It could not bind to any of the TCP ports in the range.
	Action	If there are more workstation handlers than ports available in the range specified by -p and -P, then a new handler will not be able to bind to any of the TCP ports in the allowable range. Do not forget about the TCP port that is used by the workstation listener as well. Increase the range specified by the -p and -P options.
1221	ERROR: Could not establish listening address address
	Description	The workstation listener has tried all TCP ports within the range specified by the -p and -P options. It could not bind to any of the TCP ports in the range. The workstation listener could not bind to the given address.
	Action	If there are more workstation handlers than ports available in the range specified by -p and -P, then a new handler will not be able to bind to any of the TCP ports in the allowable range. Do not forget about the TCP port which is used by the workstation listener as well. Increase the range specified by the -p and -P options. Make sure that address is correct.
1222	ERROR: Expected numeric argument to -z option
	Description	The -z option to the workstation listener controls the minimum allowable encryption strength. This number must be numeric.
	Action	Change the -z option to be numeric.
1223	ERROR: Expected numeric argument to -Z option
	Description	The -Z option to the workstation listener controls the maximum allowable encryption strength. This number must be numeric.
	Action	Change the -Z option to be numeric.
1224	ERROR: Link Level Encryption add-on package is not installed
	Description	The minimum number of encryption bits was greater than zero, but there is no link level encryption add-on package installed on this machine.
	Action	Install the link level encryption package or change the minimum encryption bits (the -z option) to be zero.
1229	WARN: A client failed encryption negotiation
	Description	A workstation client attempted to log in to the system, but could not negotiate an acceptable encryption level.
	Action	When workstation clients log into the system, they negotiate encryption strength with the workstation listener. If the client and listener cannot agree on the level of encryption (for example, if the workstation listener demands 128-bit encryption and the client can only speak 40-bits encryption) then this message will appear. The administrator can either change the encryption policy of the workstation listener or workstation client.
1230	ERROR: Invalid security protocol
	Description	An invalid opcode was attempted while the workstation listener was insecure.
	Action	Monitor your network for malicious use. Contact BEA Customer Support.
1231	ERROR: Memory allocation error
	Description	While negotiating the Diffie-Hellman parameters, the workstation listener ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1232	ERROR: Encryption negotiation protocol error
	Description	An invalid opcode was attempted while the workstation listener was insecure.
	Action	Monitor your network for malicious use. Contact BEA Customer Support.
1233	ERROR: Unable to get encryption handle
	Description	While negotiating the Diffie-Hellman parameters, the workstation listener had an error while attempting to get an encryption handle.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1234	ERROR: Unable to establish negotiation parameters
	Description	An invalid opcode was attempted while the workstation listener was insecure.
	Action	Monitor your network for malicious use. Contact BEA Customer Support.
1235	ERROR: Unable to send negotiation parameters
	Description	While attempting to send the Diffie-Hellman parameters to the client, an error occurred.
	Action	The network may have experienced an error, or the client waiting for the security packet may have been killed. If neither of these events has occurred, contact BEA Customer Support.
1236	ERROR: Unable to begin encryption
	Description	After establishing the shared key, an error occurred while starting encryption.
	Action	Monitor your network for malicious use. Contact BEA Customer Support.
1237	ERROR: tpnotify(TPACK) failed to reply, tperrno = tperrno
	Description	The workstation handler sent an acknowledged unsolicited message to a client. However, that client never sent its acknowledgment.
	Action	The network may have experienced an error, or the client waiting for the notification may have been killed. tperrno may provide clues as to the cause of this failure. If neither of these events has occurred, contact BEA Customer Support.
1238	ERROR: Invalid security parameters
	Description	The encryption level of the workstation listener is greater than zero bits, but the link level encryption package is not installed on this machine.
	Action	The MIB may have changed the minimum encryption bits for this workstation handler. If the new value of the minimum encryption bits is greater than zero and the link level encryption package is not installed, then no clients will be able to log into the workstation handler. Change the minimum encryption value via the -z option to the workstation listener, or through the MIB with the TA_MINENCRYPTBITS member of the T_WSL class.
1239	ERROR: Invalid security parameters
	Description	The encryption level of the workstation listener is greater than forty bits, but only the 40-bit link level encryption package is installed on this machine.
	Action	The MIB may have changed the minimum encryption bits for this workstation handler. If the new value of the minimum encryption bits is greater than forty, then no clients will be able to log into the workstation handler. Change the minimum encryption value via the -z option to the workstation listener, or through the MIB with the TA_MINENCRYPTBITS member of the T_WSL class.
1240	ERROR: Failed to read server table entry, tperrno = tperrno
	Description	The workstation listener was rebooting after a failure and could not read the server table.
	Action	The bulletin board may be corrupted. tperrno may provide clues as to the cause of this failure. Contact BEA Customer Support.
1241	ERROR: Sending of reply to tpbroadcast() or tpnotify() call to client failed
	Description	The workstation handler received an acknowledgment from a workstation client but was unable to forward the acknowledgment to the sender of the tpnotify.
	Action	The originator of the tpnotify may have been killed. If the originator of the notify has not been killed, contact BEA Customer Support.
1242	ERROR: Bad Internet type of listening address provided: address
	Description	address is not a valid Internet address.
	Action	Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change address to comply with the known formats. If you believe that your address is in the proper format, contact BEA Customer Support.
1243	ERROR: -H hexadecimal value has to have an even length
	Description	If an address starts with 0x, then that address must be an even length of characters.
	Action	A hexadecimal character represents a nibble (4 bits). A byte is 8 bits. To fully specify a byte, two characters are needed. Change the address to have an even number of characters.
1244	ERROR: Memory allocation failure
	Description	While creating a data structure for an address specified via the -H option, the system ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1245	ERROR: Bad hexadecimal number provided for external address: address
	Description	The hexadecimal address address from the -H option is in an improper format.
	Action	Any address which starts with 0x must be a valid hexadecimal address. Valid hexadecimal characters are 0 - 9, a-f and A-F. Change address to comply with the known formats.
1246	ERROR: Bad Internet type of external address provided: address
	Description	The Internet address address from the -H option is in an improper format.
	Action	Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change address to comply with the known formats.
1247	ERROR: Memory allocation failure
	Description	While allocating space for the binary representation of the -H option address, the system ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1248	ERROR: Memory allocation failure
	Description	While allocating space for the binary representation of the -H option address, the system ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1249	ERROR: -H and -n have different length of network address
	Description	If you are using an external address, then that address must have the same format as the -n option.
	Action	Change the -H option to have the same format as the -n option.
1250	ERROR: External address can not be resolved val
	Description	The Domain Name Service could not resolve the address given by the -H option.
	Action	Make sure that the Domain Name Service knows the server represented by the address given in the -H option. If the name service does not know the server, reconfigure the name service properly. Change the address in the -H option to a name which is well known by the name service.
1251	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc failed.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used be a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1252	ERROR: Unable to determine license level
	Description	While validating the value of the -c argument of the workstation listener, an error occurred while retrieving the current license attributes.
	Action	Contact BEA Customer Support.
1253	ERROR: Workstation compression configured, but no license for workstation compression was found
	Description	You do not have a license to use workstation compression.
	Action	Purchase a license for workstation compression. If you believe that you own and have installed the license for workstation compression, contact BEA Customer Support.
1254	ERROR: Bad conversational sequence number
	Description	Conversations are sequenced in order to provide protection. One of the conversational messages arrived out of order. The conversation has been disconnected, and if a transaction was active, it has been set to the ABORTONLY state.
	Action	Look at the userlog to determine whether or not the BRIDGE has given up sending any messages to the message queue for the workstation handler. If it has, the operating system may need to be tuned to properly handle a high volume of messages. Using compression may also alleviate this problem. This error may also occur when the BRIDGE is failing over to a new network link or failing back to a high priority link.
1255	WARN: Couldn't change to client context num, continuing
	Description	An internal error was encountered while attempting to switch client contexts.
	Action	Contact BEA Customer Support.
1256	WARN: .SysClientSecurity: User user on machine authentication failure
	Description	This is the system event message which is posted when a user fails authentication.
	Action	The action depends on the security policy of the user.
1257	ERROR: Couldn't create buffer for receiving messages
	Description	An attempt dynamically to allocate memory from the operating system using malloc failed in the generic handler.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1258	WARN: No client context space available in handler
	Description	The maximum number of clients has been used up in the generic handler.
	Action	Either increase the total number of clients allowable into the system, or do not attempt to connect to a loaded system.
1259	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc failed in the generic handler.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1260	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc failed in the generic handler.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1261	ERROR: tpinit() failed, tperrno = tperrno
	Description	A client was unable to enter the system from the generic handler. The tperrno may give clues as to the cause of this failure.
	Action	Contact BEA Customer Support.
1262	ERROR: tpchkauth() failed, tperrno = tperrno
	Description	tpchkauth failed from the generic handler. The tperrno may give clues as to the cause of this failure.
	Action	Contact BEA Customer Support.
1263	WARN: Forced shutdown of client; user name 'name'; client name 'client'
	Description	A forced shutdown of the given user name and client name has been performed by the generic handler.
	Action	None.
1264	WARN: .SysClientDied: User user on machine client died
	Description	This is the event posted when a forced shutdown of the given user name on machine has been performed by the generic handler.
	Action	None.
1265	ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
	Description	An operating system error occurred in the generic handler while reading a message queue.
	Action	Ensure the sanity of the system. Contact BEA Customer Support.
1266	ERROR: Received message of type 'type' to tpinit() call
	Description	The only message type which tpinit takes is TPINIT. The generic handler found a type of type was given to tpinit.
	Action	Ensure all clients of the generic handler provide the proper buffer type during tpinit.
1267	ERROR: TPINIT information must be passed to tpinit() call in secure application
	Description	Secure applications must provide the TPINIT buffer to tpinit. A client of the generic handler in a secure application did not provide the TPINIT buffer.
	Action	Ensure all clients of the generic handler provide a TPINIT buffer during tpinit in a secure application.
1268	ERROR: Invalid client name given 'client'.
	Description	The given client is invalid in the application.
	Action	Ensure that the TPINIT buffer passed to tpinit does not have the invalid client name.
1269	ERROR: Invalid length for TPINIT structure given
	Description	An invalid TPINIT buffer has been processed by the generic handler.
	Action	There may be a negative length in the TPINIT datalen field. Ensure no client passes a TPINIT buffer with a negative datalen field to the generic handler.
1270	ERROR: Failed to update registry table information
	Description	The generic handler was not able to update the BEA TUXEDO system registry information.
	Action	Contact BEA Customer Support.
1271	ERROR: Failed to send message to authentication server, tperrno = tperrno
	Description	The generic handler was not able to send the TPINIT buffer to the server offering AUTHSVC.
	Action	Ensure that the authentication server is up and running, and that the AUTHSVC is currently advertised. Contact BEA Customer Support.
1272	WARN: Invalid notification option given, reset to TPU_IGN.
	Description	The generic handler does not handle the notification option from the client.
	Action	Ensure that all clients change the notification options to one which the generic handler is able to accept.
1273	INFO: .SysClientState: User user on machine state change to state
	Description	This event is posted by the generic handler whenever the user on machine changes state. The new state is given in state.
	Action	None.
1274	INFO: Abortively disconnecting workstation client user[user], client[client]
	Description	The generic handler is disconnecting a client which is believed to be dead.
	Action	None.
1275	INFO: Userid: [userid], Clientid: [clientid] timed out due to inactivity
	Description	The generic handler timed out the given userid and clientid.
	Action	None.
1276	ERROR: Received message with unknown release number value
	Description	The WSH received a packet with an unknown release number value. The network may be having difficulty. If link level encryption is in use, this error may be an indication that an attack is in progress.
	Action	If this error happens consistently, then contact BEA Customer Support.
1277	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc failed while initializing the WSL or WSH.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1278	ERROR: Address conversion error
	Description	The WSH had a problem converting an address from a binary format to a text format.
	Action	If this error happens consistently, then contact BEA Customer Support.
1279	ERROR: descriptor allocation error
	Description	The WSH was unable to allocate a network resource for the listening endpoint.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1280	ERROR: Could not initialize network (error)
	Description	The WSH or WSL could not initialize its network.
	Action	Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support.
1281	ERROR: Could not initialize global information (error)
	Description	The WSH or WSL could not initialize its network.
	Action	Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support.
1282	ERROR: Failed to initialize network protocol information (error)
	Description	The WSH or WSL could not initialize its network.
	Action	Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support.
1283	ERROR: Network error (error) servicing network event
	Description	The WSL encountered a severe error while handling network events.
	Action	Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support.
1284	WARN: Failed to allocate a network resource (error)
	Description	The WSH or WSL could not allocate a network descriptor for a remote connection.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1285	ERROR: Expected numeric argument to -N option
	Description	The -N option to the WSL requires a numeric argument greater than or equal to zero.
	Action	Modify the -N option of the WSL to have a numeric argument in the proper range.
1286	ERROR: -K argument must be client, handler, both, or none
	Description	The -K option for the WSL requires an argument of client, handler, both or none.
	Action	Ensure that the -K option of the WSL is client, handler, both or none. Check your spelling.
1287	WARN: Forced shutdown of client; user name 'name'; client name 'name'; workstation address 'xxx.xxx.xxx.xxx'
	Description	This may result from shutting down a WSH when clients are connected, a client connection has timed out, the WSH was unable to send a network message to the client or an incorrect APP_PW (application password) was rejected during tpinit.
	Action	If APP_PW is turned on (refer to your ubbconfig file and ubbconfig(5)), then check with your system administrator to verify that you are using the correct application password for your TUXEDO application.
1288	WARN: setsockopt() for SO_KEEPALIVE failed
	Description	The KEEPALIVE handler-side networking option was configured for a WSL/WSH pair, but could not be enabled.
	Action	This error is ignored and WSH processing continues normally. However, network errors may not be reported, or may be reported less promptly. Consider enabling the inactive client timeout (WSL -T option) to reclaim resources associated with dead network connections.
	See Also	WSL(5)
1289	WARN: KEEPALIVE option requested but not available on this platform
	Description	The KEEPALIVE handler-side networking option was configured for a WSL/WSH pair, but could not be enabled because it is not available on this platform.
	Action	This error is ignored and WSH processing continues normally. However network errors may not be reported, or may be reported less promptly. Consider enabling the inactive client timeout (WSL -T option) to reclaim resources associated with dead network connections.
	See Also	WSL(5)
1290	ERROR: Can't parse the address address
	Description	While attempting to resolve address, an error occurred.
	Action	Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name and port number portion of address can be located by your server.
1291	ERROR: Can't resolve host name in address address
	Description	While attempting to resolve the host name portion of address, an error occurred.
	Action	Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name portion of address can be located by your DNS server.
1292	ERROR: Unknown address type: address
	Description	The given address does not correspond to a type known by the system.
	Action	The BEA TUXEDO System understands several types of address format. Addresses which start with // must be Internet addresses. Addresses which start with 0x are hexadecimal representations of the address. Other formats may or may not be understood by the BEA TUXEDO system.
1293	ERROR: Can't resolve port number in address address
	Description	While attempting to resolve the port number portion of address, an error occurred.
	Action	Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the port number portion of address can be located by your server.
1294	ERROR: Can't convert the address address to binary format
	Description	An error occurred while converting address to an internal binary representation.
	Action	Contact BEA Customer Support.
1295	ERROR: Illegal character in the address address
	Description	There is an illegal character in the port portion of address. Ports may only have alphanumeric characters.
	Action	Remove the illegal character from the port portion of the address.
1296	ERROR: Missing port number in the address address
	Description	address must have a port number portion.
	Action	Supply a port number portion in the given address. Otherwise, the WSL or WSH cannot determine its listening endpoint properly.
1297	ERROR: Port number cant be bigger than value in the address address
	Description	The port number portion of address is larger than the largest allowable port number of value.
	Action	Change the port number to be within the specified range.
1298	ERROR: TUXDIR environment variable not set
	Description	The environment variable TUXDIR must be set when buildwsh is run.
	Action	Set the environment variable TUXDIR before running buildwsh.
	See Also	buildwsh