WTCLocalTuxDom

This interface provides access to the WTC local Tuxedo Domain configuration attributes. The methods defined herein are applicable for WTC configuration at the WLS domain level.

Table 85-1 WTCLocalTuxDomMBean Element Attributes

Attribute	Description	Range of Values and Default	Console Label
Access-Point	Defines a unique name within the scope of MBean types WTCLocalTuxDom and WTCRemoteTuxDom used to identify the access point or domain.		Access Point
Access-Point-Id	Defines the domain access point identifier. This identifier is a unique name across all local and remote domain access points.		Access Point Id
Block-Time	Defines the maximum wait time (seconds) allowed for a blocking call.	Default: 60 Minimum: 0 Maximum: 2147483647	Blocking Time Out
Cmp-Limit	Defines the compression threshold used when sending data to a remote domain. Application buffers larger than this size are compressed.	Default: 2147483647 Minimum: 0 Maximum: 2147483647	Compression Limit
Conn-Principal-Name	Defines the principal name used to verify the identity of this domain when establishing a connection to another domain. ul> This parameter only applies to domains of type TDOMAIN that are running BEA Tuxedo 7.1 or later software. li>If not specified, the connection pricipal name defaults to the AccessPointID for this domain. Note: ConnectionPrincipalName is not supported in this release.		Connection Principal Name
Connection-Policy	Defines the conditions under which a local domain tries to establish a connection to a remote domain. ON_DEMAND: A connection is attempted only when requested by either a client request to a remote service or an administrative connect command. ON_STARTUP: A domain gateway attempts to establish a connection with its remote domain access points at gateway server initialization time. Remote services (services advertised in JNDI by the domain gateway for this local access point) are advertised only if a connection is successfully established to that remote domain access point. If there is no active connection to a remote domain access point, then the remote services are suspended. By default, this connection policy retries failed connections every 60 seconds. Use the MaxRetry and RetryInterval attributes to specify application specific values. INCOMING_ONLY: A domain gateway does not attempt an initial connection to remote domain access points at startup and remote services are initially suspended. The domain gateway is available for incoming connections from remote domain access points and remote services are advertised when the domain gateway for this local domain access point receives an incoming connection. Connection retry processing is not allowed.	Default: "ON_DEMAND" Valid values: "ON_DEMAND" "ON_STARTUP" "INCOMING_ONLY"	Connection Policy
Interoperate	Specifies whether the local domain interoperates with remote domains that are based upon Tuxedo release 6.5. If Yes, the local domain interoperates with a Tuxedo 6.5 domain.	Default: "No"	Interoperate
Max-Encrypt-Bits	Defines the maximum encryption key length (in bits) used when establishing a network connection for a local domain. A value of 0 indicates no encryption is used. The value of the MaxEncryptBits attribute must be greater than or equal to the value of the MinEncrypBits attribute. A MaxEncryptBits of 40 can be used only with domains running Tuxedo 7.1 or higher.	Default: "128" Valid values: "0" "40" "56" "128"	Max Encryption Level
Max-Retries	Defines the number of times that a domain gateway tries to establish connections to remote domain access points. Use only when Connection Policy is set to ON_STARTUP. Use the minimum value to disable the retry mechanism. Use the maximum value to try until a connection is established.	Default: 9223372036854775807 Minimum: 0 Maximum: 9223372036854775807	Max Retries
Min-Encrypt-Bits	Defines the minimum encryption key length (in bits) used when establishing a network connection for a local domain. A value of 0 indicates no encryption is used. The value of the MinEncrypBits attribute must be less than or equal to the value of the MaxEncrypBits attribute. A MinEncrypBits of 40 can be used only with domains running Tuxedo 7.1 or higher.	Default: "0" Valid values: "0" "40" "56" "128"	Min Encryption Level
NWAddr	Defines the network address of the local domain gateway. Specify the TCP/IP address in one of the following formats: //hostname:port_number //#.#.#.#:port_number If the hostname is used, the domain finds an address for hostname using the local name resolution facilities (usually DNS). If dotted decimal format is used, each # should be a number from 0 to 255. This dotted decimal number represents the IP address of the local machine. The port_number is the TCP port number at which the domain process listens for incoming requests.		Network Address
Name	The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.		Name
Notes	Optional information that you can include to describe this configuration.		Notes
Retry-Interval	Defines the number of seconds between automatic attempts to establish a connection to remote domain access points. Use only when Connection Policy is set to ON_STARTUP.	Default: 60 Minimum: 0 Maximum: 2147483647	Retry Interval
Security	Defines the type of application security enforced. NONE: No security is used. APP_PW: Password security is enforced when a connection is established from a remote domain. The application password is defined in the WTCResourcesMBean. DM_PW: Domain password security is enforced when a connection is established from a remote domain. The domain password is defined in the WTCPasswordsMBean.	Default: "NONE" Valid values: "NONE" "APP_PW" "DM_PW"	Security