PeopleSoft Enterprise Order to Cash Common Information 9.1 PeopleBook

Maintaining Contacts

This chapter provides an overview of contact information and discusses how to set up contacts.

Understanding Contact Information

Customer service representatives (CSRs) can set up and maintain contact information for internal and external contacts. Using the contact functionality, they can maintain contact information, link a contact to one or more customers, and control access to self-service transactions. How you use the Contact Information pages might vary, depending on whether you choose to interface contact information or perform contact maintenance online. You can enter or update information from an interface you write to an existing system containing contact information.

You can use the Contact enterprise integration point to publish contact information and interface with other packages that require synchronization of contact data. This PeopleSoft application supports the contact service operations used for inbound and outbound publishing.

If you are integrating with PeopleSoft CRM databases, we recommend you synchronize the contact table by performing a full batch publish to the subscribing system and provide updates to the subscribing system with incremental messages. Contacts may be maintained in both PeopleSoft SCM and CRM. When this situation occurs, contact ID autonumbering should be maintained in the SCM database.

The service operations in PeopleSoft Integration Broker are delivered with a default status of Inactive. You must activate each service operation before attempting to send or receive data from a third-party source or another PeopleSoft system, such as CRM.

Use the information in the following table and refer to the setup instructions in the PeopleSoft Supply Chain Management Integrations 9.1 PeopleBook, "Implementing Integrations" chapter, Setting Up Service Operations section.

Service Operation	Direction and Type	Handlers	Chunking Available?	Integrates With
CONTACT_FULLSYNC	Inbound/Outbound Asynchronous	ContactFullSync	No	CRM, Third-party
CONTACT_FULLSYNC_EFF	Outbound Asynchronous	NA	No	CRM, Third-party
CONTACT_SYNC	Inbound/Outbound Asynchronous	ContactSync ContactSyncEff	No	CRM, Third-party
CONTACT_SYNC_REQ CONTACT_SYNC_REQ_CALLBACK	Inbound/Outbound Asynchronous, Request/Response	ContactSync	No	Customer Data Hub, Third-party
CONTACT_SYNC_EFF	Outbound Asynchronous	NA	No	CRM, Third-party

See Setting Up Service Operations.

See PeopleSoft Enterprise PeopleTools PeopleBook: Integration Broker

External Contacts

External contacts can be consumers, customers, or business partners. Set up external contacts for those customer contacts who need to access self-service transactions and receive documents such as order acknowledgements. If the external contact requires access to self-service transactions, set up login security on the Contact User Profile page. To enable contacts to receive documents, select the documents and preferred communication on the Contact Additional Info page.

Internal Contacts

Internal contacts are the organization's employees. Currently, internal contacts are used only with email and workflow that are associated with PeopleSoft Conversations and PeopleSoft Contact Us to communicate with external contacts.

User ID and Role Assignment

Contacts need a user ID to access self-service transactions. The user ID is linked to a role that determines the transactions the contact can access. A role is an intermediate object between permission lists and the individuals who use the system. You can assign multiple permission lists to a role, and multiple roles to an individual. The role manages which self-service transactions an individual can access as well as the type of work to be routed to the individual if you are using the Workflow role. Set up roles on the Roles - General page.

Security Establishment

When you set up contacts, you select the roles that identify the self-service transactions they can access. Self-service data security for contacts is handled by controlling customer data. Contacts can only view data for their customers and their assigned customer types. For example, if a transaction requires a bill-to customer type, then the contact must be assigned to the customer and the customer must be defined as a bill-to customer type.

CSRs can enter information about contacts in the Contact Info component. CSRs assign customers to contacts and establish login security. Login information is necessary only for those contacts who need external access to the system.

When you save a contact, the system creates a contact ID and updates the contact tables. In addition, if you enter the appropriate security information, the system creates a user ID to enable the contact to access self-service transactions.

Note. When setting up access to the CONTACT_INFO component pages, equivalent access to component interfaces USER_PROFILE and CUSTOMER_CONTACT is also required.

Important! The Maintain Contact functionality updates the contact tables, links customers to the contact, and updates the security tables. The PeopleTools pages you use to maintain user profile information update only the security tables. If you are using contacts, to avoid incomplete or incorrect data, you should use only the Maintain Contact component to create user IDs and to update contact information.

Important! The contact table is not a child record of the customer. The system updates contact information in both the contact and customer tables. You can enter contact information only in the Maintain Contact component.

Contact Structure Example

As an example of a typical customer contact structure, suppose that a corporate, bill-to, and remit-from customer was set up in the system. The customer ID is 5001, and it represents the headquarters for a customer in Texas. Within the corporate structure is a product division or branch location. The branch is identified as customer 6001 and is defined as a bill-to, ship-to, and sold-to customer; as such, it places orders, receives shipments, and is billed for the orders.

The customer has another branch location, identified as customer 7001, that is only a bill-to and ship-to location. Branch 5001 (headquarters) handles purchasing for 7001, but customer 7001 is billed for the purchases and is the ship-to location for the purchases.

The following diagram illustrates how the Business to Business (B2B) customer contacts are set up for this example:

Example of B2B customer contacts

A CSR sets up the five external contacts who need external access to their customer data using the PeopleSoft self-service transactions:

Sally is an accounts payable (AP) clerk who pays bills for 5001 and 6001.
Ed is an AP clerk who pays bills for 7001.
Tim is a purchasing (PO) agent who orders for 6001.
Brian is a PO agent who orders for 5001.
Mary is a PO manager who can view and create orders for 5001 and 6001.

This table lists the data security needs for the different contacts:

User	Role	Accessible Customer IDs	Customer Type	Transaction
Sally	AP Clerk	5001, 6001	Bill To	View Bills.
				Pay Bills.
				Account Balance Inquiry.
				Payment Summary.
Ed	AP Clerk	7001	Bill To	View Bills.
				Pay Bills.
				Account Balance Inquiry.
				Payment Summary.
Tim	PO Agent	6001	Sold To	Create Orders.
				Order Tracking.
				Order Summary.
Brian	PO Agent	5001	Sold To	Create Orders or possibly only Create Quotes, and manager copies quote to order after approval.
				Order Tracking.
				Order Summary.
Mary	PO Manager	5001, 6001	Sold To	Create Orders.
				Order Tracking.
				Order Summary.
				View Bills.

The security architect must define the roles for this business scenario:

Customer AP clerk who has access to these self-service transactions:
- View Bills
- Pay Bills
- Account Balance Inquiry
- Payment Summary
Customer PO agent who has access to these self-service transactions:
- Create Quotes
- Order Tracking
- Quote/Order Summary
Customer PO manager who has access to these self-service transactions:
- Create Orders
- Order Tracking
- Order Summary
- View Bill

Internal CSR who has access to the internal Contact Information pages and can grant access to the external contacts.

For example, suppose a CSR assigns Sally a user ID and password and grants her access to the role of AP clerk. These actions occur at save time:

The system creates a new contact ID for Sally and updates the contact tables.
The system updates the security tables and creates a link between Sally's contact ID and user ID.

The system updates the Contact/Customer table to contain both the customers to whom a contact is assigned and the customer types to which the contact has access:

User	Customer ID	Bill To	Sold To	Ship To	Correspondence
Sally	5001	Y	N	NA	Y
	6001	Y	N	N	Y

When the CSR sets up the other external contacts, the customer data security is as follows:

User	Customer ID	Bill To	Sold To	Ship To	Correspondence
Ed	7001	Y	NA	N	Y
Tim	6001	N	Y	N	N
Brian	5001	N	Y	NA	N
Mary	5001	N (if Mary needs to View Bills, this is Y)	Y	NA	N
	6001	Y	Y	N	N

When an external contact accesses a self-service transaction, the system checks the customer IDs that are available for the contact and for the self-service transaction customer type, and verifies access rights to that customer's data.

The self-service transaction View Bills accessed through PeopleSoft eBill Payment uses the bill-to customer type. Each contact who has access to the Bills transaction should also have permission to use the bill-to customer type for the customers to which they are assigned.

Setting Up Contacts

To define contacts, use the Contact Information component. Use the CONTACT_INFO component interface to load data into the tables for this component.

This section provides an overview of front-office staffing setup pages and discusses how to:

Define internal or external contacts.
Link contacts to customers and specify security options.
Select communication preferences and enter contact credit card information.
Set up contact type and phone information.
Complete contact user profiles.
Enter staffing front office contact information.
Add and view orders.
Associate marketing activity events with contacts.
View contact history.
Add contact agendas.
Add contact history.
Enter contact related employees.
Add target qualifications.
Enter target job titles.
View and add forms.
Add new forms.
View and add attachments.

Understanding Front-Office Staffing Setup Pages

Of the pages described in this section, only these are applicable to Staffing Front Office:

Staffing Information.
Marketing Activity.
Related Employees.
Target Qualifications.
Resource Qualifications - Select Qualification Profile.
Resource Qualifications - Search for Qualifications.
Resource Qualifications - Select Competencies.
Target Job Title.
Forms.
Forms Detail.
Attachments.

Pages Used to Set Up Contacts

Page Name	Definition Name	Navigation	Usage
Contact	CONTACT	Customers, Contact Information	Maintain information about each contact.
Contact Customer	CONTACT_CUST_PAGE	Customers, Contact Information Click the Contact Customer Information link on the Contact page. Click the Contact Customer Information link on the other pages in the Contact Info component.	Build relationships between contacts and customer IDs served by the contact or with which they are associated. If a contact is associated with only one customer, enter that customer on this page. If the contact is a broker, for example, use this page to establish relationships with the multiple customers the broker serves. Set up security options on the Self Service Security tab.
Contact Additional Info	CONTACT_ADDTL_INFO	Click the Additional Info link on the Contact Customer page.	Select documents for external contacts to receive, the contacts' preferred communication method, and enter contacts' credit card information.
Contact Customer Address	CONTACT_CUST_ADDR	Click the Credit Card Address link on the Contact Additional Info page.	View the customer credit card payment address associated with a contact.
Contact Phone and Type	CONTACT_PHONE_PAGE	Customers, Contact Information Click the Contact Phone and Type link on the Contact page. Click the Contact Phone and Type link on the other pages in the Contact Info component.	Enter phone information and contact types for internal and external contacts.
Contact User Profile	CONTACT_USER_PROF	Customers, Contact Information Click the User Profile link on the Contact page. Click the User Profile link on the other pages in the Contact Info component.	Enter the information that enables contacts to access self-service transactions, and enter the roles to which the contact will be assigned.
Staffing Information	CONT_STAF_INFO	Customers, Contact Information Click the Staffing Information link on the Contact page.	Enter contact information for use in Staffing Front Office.
Order	FO_ORDER_HDR	Select 010 - View Orders from the Go To drop-down list on the Staffing Info page. Select 020 - Add Order from the Go To drop-down list on the Staffing Info page.	View and add orders associated with this contact. See Recording General Information About a Job Order.
Marketing Activity	CONT_MRKTNG_ACTIV	Select 030 - Marketing Activities from the Go To drop-down list on the Staffing Information page.	Enter the type of marketing events for which you want this contact to be included.
Review History	FO_HISTORY	Select 040 - View History in the Go To drop-down list on the Staffing Info page.	Review the history items associated with the contact.
Agenda Detail	FO_AGENDA_DETAIL	Select 050 - Add Agenda from the Go To drop-down list on the Staffing Info page.	View agenda details and add agenda items for contacts.
History Detail	FO_HISTORY_DTL	Select 060 - Add History from the Go To drop-down list on the Staffing Info page.	View history details.
Related Employees	CONTACT_EMP	Select 070 - Related Employees from the Go To drop-down list on the Staffing Info page.	Enter the IDs of the employees that the contact usually requests for staffing services.
Target Qualifications	CONT_QUALIFS	Select 080 - Target Qualifications from the Go To drop-down list on the Staffing Information page.	Enter the target qualifications that the contact requests most often. This information can be used in Opportunity searches.
Resource Qualifications - Select Qualification Profile	RS_SELQUALPROFILE	Click the Profile button on the Target Qualifications page.	Add target qualifications from a qualification profile.
Resource Qualifications - Search for Qualifications	RS_QUALIF_SRCH	Click the List button on the Target Qualifications page.	Add target qualifications from the qualifications list.
Resource Qualifications - Select Competencies	RS_SO_COMP	Click the Competency Tree button on the Target Qualifications page.	Add target qualifications from a competency tree.
Target Job Title	CONT_JOBTITLE	Select 090 - Target Job Titles from the Go To drop-down list on the Staffing Information page.	Enter the job titles that the individual contacts request most often. This information can be used for Opportunity searches.
Forms	CONT_FORMS	Select 100 - Forms from the Go To drop-down list on the Staffing Information page.	Review the forms associated with the contact.
Forms Detail	CONT_FORMS_DTL	Click the Add New Form button on the Forms page.	Associate a new form with the contact record and enter the appropriate values for the fields in the form. Forms enable you to capture information that is not already captured in other fields in the component. The fields in each form are defined through system configuration.
Attachments	CONT_ATTACHMENT	Select 110 - Attachments from the Go To drop-down list on the Staffing Information page.	Add attachments to contacts.

Defining Internal or External Contacts

Access the Contact page (Customers, Contact Information).

Contact ID	You can assign specific contact IDs that you choose or let the system automatically assign the next available sequential contact ID. You can have multiple contact names with different effective dates for each contact ID. The contact ID for new contacts is based on the settings on the Automatic Numbering page.
Contact Flag	Select from these values: External: Select if this contact is a consumer, customer, or business partner who needs to access self-service transactions and receive documents from you. Internal: Select if this contact is an employee of the organization and needs to be set up as a contact to receive email through PeopleSoft Conversations and PeopleSoft Contact Us.
Email ID	If you are performing credit card processing, third-party credit card authorization and payment applications require an email ID. The email ID on the Credit Card Data page is used by default during sales order entry if the customer is paying by credit card. See Entering Credit Card Data and Authorizing Credit Card Transactions Online. This field is also required if you are sending a remittance advice for direct debit transactions. Note. This field is also required if you are sending a remittance advice for direct debit transactions. See Managing Direct Debits.
Salutation Code and Salutation	You can either select a code or enter a free-form text salutation for correspondence with the contact, but not both. You define salutation codes on the Salutation Table page.
Language Code	The system uses this code for recipient documents such as sales order acknowledgments and buying agreement renewal letters.
Person ID	If the installation interfaces with PeopleSoft CRM, the system populates this field from PeopleSoft CRM.

Linking Contacts to Customers and Specifying Security Options

Access the Contact Customer page (click the Contact Customer Information link on the Contact page).

Customer Tab

Location

Select the address number to use for the corresponding contact. Set up customer addresses on the General Information - Address page.

Additional Info

Click to access the Contact Additional Info page, where you can set up documents for the contact to receive, the contact's preferred communication, and the contact's credit card information.

Primary Bill To, Primary Ship To, Primary Sold To, and Primary IPAC

Select the check boxes that apply to this customer contact. Customers must be selected as bill-to, ship-to, sold-to, or IPAC customers on the General Info page for the associated check box to be available.

Note. You can have numerous current contacts for a customer, but you must designate one of them as the primary contact for each role. The primary sold-to contact appears as the default on sales orders, contracts, return material authorizations, and quotes. You can override the primary contact by selecting another contact.

Warning! If you select a Primary Bill To, Primary Ship To, or Primary Sold To value that was not selected as a primary bill-to, ship-to, or sold-to value on the General Information - Address page, this information will be overwritten on the Address page.

Self Service Security Tab

View All Orders	In the case of brokers, select this option so they can view all of the orders placed on behalf of a customer instead of only the orders they create.
Bill To, Ship To, Sold To, Broker Customer, and Correspondence	Select customer roles and types that the contact can use. You can select only customer roles and types that are already set up for the customer on the General Info page.

Entering Contact Credit Card Information

Access the Credit Card page (click the Credit Card link on the Contact Customer page).

SetID, Contact ID	Displays the value defined on the Contact page.
Customer SetID and Customer ID	Displays the value defined on the Contact Customer page.

Credit Card Information

Credit Card Type	Select the type of credit card the contract will use. These values must already be set up on the Credit Card Type page.
Card Number	Enter the credit card number. The system performs a number of validations that are specified by the parameters you set up on the Credit Card Type page. Note. Security access should not be granted to the Credit Card Info page if it violates country-specific or legislative legal requirements about storing credit card numbers with customer records in the database. This practice is illegal in some European countries.
Primary Card	View the default credit card number that appears on the Credit Card Data page during sales order entry.
First Name and Last Name	Enter the cardholder's name in the two name fields. If the name on the card includes a middle initial, include the middle initial in the First Name field.
Expiration Month and Expiration Year	Use MM and YYYY formats. For example, if the credit card expires in March 2002, enter 03 in the Credit Card Expiration Month field and 2002 in the Credit Card Expiration Year field.
Address Sequence Number	Displays the value established on the General Information - Address page.
Credit Card Address	Click to access the Contact Customer Address page and view the customer who is associated with the contact and who will be used as the payment address for the credit card.
Display Unmasked Card Number	If the user has access to the credit card security component, this field appears. If this option is selected, the system displays the unencrypted credit card number. You may need to grant users access if they must verify the entire credit card number.

Selecting Communication Preferences

Access the Documentation page (click the Documentation link on the Contact Customer page).

Document Code

Select the documents that the contact should receive.

Preferred Communication

For each document, select a method for the contact from these values:

C (call): Prefers to be contacted by telephone. Enter the phone number on the Contact Phone and Type page.

I (XML only): Prefers to be contacted using XML.

R (XML and print): Indicates you must print the communication in addition to sending it using XML.

E (email only): Prefers to be contacted by email. Enter the email address on the Contact page.

P (email and print): Indicates you must print the communication in addition to sending it by email. Enter the email address on the Contact page.

M (standard mail): Prefers to be contacted by post.

A (email invoice as attachment): Email invoices where the email contains a PDF attachment of the invoice.

N (email notification): Email invoices where the email contains a link to view the invoice in eBill Payment.

F (fax): Prefers to be contacted by fax. Enter the phone number on the Contact Phone page.

Note. If you select any value other than P (print) or XML for any PeopleSoft Order Management documents, you must configure the system to interface to a fax or email report delivery system. This configuration is not delivered as a standard feature in PeopleSoft Order Management or PeopleSoft Billing.

Note. For order acknowledgments in PeopleSoft Order Management to be processed using XML, at least one contact for the sold-to customer must have a document with a code of Order Acknowledgment and a preferred communication method of XML. Similarly, for a quote to be processed using XML, at least one contact for the sold-to customer must have a document with a code of Quote and a preferred communication method of XML.

Number of Copies

Enter the number of copies, when applicable. For example, a contact may want you to send a fax containing three copies of the shipping order and to mail one copy of the invoice. The preferred communication method you specify for the contact automatically appears, by default, as the preferred communication method for each document. You can override this value.

Setting Up Contact Type and Phone Information

Access the Contact Phone and Type page (click the Contact Phone and Type link on the Contact page).

Phone Number

You can enter multiple combinations of phone numbers for each contact. You can flag one phone number as the primary.

Note. If you are performing credit card processing, third-party credit card authorization and payment applications require a telephone number. The telephone number appears on the Credit Card Data page during sales order entry if the customer is paying by credit card. If the contact has a business or home phone number on file, the business phone appears first; if the contact has no business phone, the home phone appears by default.

Contact Type

Classifies contacts according to the department in which they work or the function they perform. Some examples of contact types within the customer's business include billing, sales, or executive management. Because a contact person may perform several roles at once, you can assign multiple contact type codes to each contact. You establish contact codes on the Contact Type Code page.

Completing Contact User Profiles

Access the Contact User Profile page (click the User Profile link on the Contact page).

Use the Contact User Profile page to establish security for self-service transactions. Enter a password, add security permissions, and identify the role that the contact can access during self-service transactions.

Logon Information

User ID, Password, and Confirm Password	Enter these values for external contacts who must access self-service transactions.
Locked Out?	Select to disable the contact's access to the system. For example, you may want to disable system access while the individual is out on disability leave but retain the contact as a User Profile so that the person can access the system upon returning to work.
Process Profile	Select to enable customers to run a PeopleSoft batch process.
Primary Permission List	Associate with the new user role you select. Primary permissions control all but page-based permissions (business interlinks, messaging, and so forth).
Role Name	A role is an intermediate object between users and permission lists. You assign multiple permission lists to a role, and multiple roles to a user. The role manages to which applications the contact has access as well as the type of work routed to the contact. You establish roles on the Roles page. As part of the role definition, CSRs can select only roles to which they can grant access, and they can delete only roles they are authorized to grant. Establish roles the CSRs can grant on the Role Grant page. Note. CSRs or other users should also be authorized to run the Component Interfaces (USER_PROFILE and CUSTOMER_CONTACT) so that the appropriate tables are updated when the contact and user profile information is created or updated. The ID type CNT must be marked as Enabled on the User Profile Types page so that the user profile information can be saved.

Entering Staffing Front Office Contact Information

Access the Staffing Information page (click the Staffing Information link on the Contact page).

Preferred First Name	Enter the name the contact prefers to be called.
Birthday	Enter contact's date of birth to help you to remember to contact the person on that day.
Best Time To Call	Enter Early Morning, Mid Morning, Noon/Lunch, Afternoon, or Evening to define when to best contact this person.

Agenda Events

Auto Plan User	Enter the user who is primarily responsible for keeping in touch with this contact. Any agenda items that you establish for this contact are assigned to this user by default.
Recurring Event Days	Specify the number of days that are to elapse before contacting this person again when recurring events are set up.
Order Event Group	Select the type of agenda items that you want to automatically add to the user's agenda when assignments are made for orders belonging to this contact.
Order Events Hold	Select this check box to prevent the system from automatically creating agenda items when users create assignments for orders belonging to this contact.

Contact Owners

User ID	Enter the ID of the individual most closely related to and responsible for acquiring or servicing the contact.
Owner Type	Enter Other, Sales User, or Service User to indicate the owner role in relation to the contact.
Owner Priority	Indicate how important this contact is for a particular owner by associating it with a priority level. You can use this information when planning sales calls to contacts.

The Go To drop-down list options enable you to access pages documented in subsequent sections of this chapter.

Adding and Viewing Orders

Access the Order page (select 020 - Add Order from the Go To drop-down list on the Staffing Information page).

Associating Marketing Activity Events with Contacts

Access the Marketing Activity page (select 030 - Marketing Activities from the Go To drop-down list on the Staffing Information page).

Contact Event Type	Enter the name of the marketing event that you want to associate with a contact.
Contact Event Frequency	The event frequency will populate based upon the setup for the event type selected.

Viewing Contact History

Access the Review History page (select 040 - View History in the Go To drop-down list on the Staffing Information page).

View history for this contact, including customer name and end date time.

Adding Contact Agendas

Access the Agenda Detail page (select 050 - Add Agenda from the Go To drop-down list on the Staffing Information page).

Add an agenda item for this contact by completing as many of the Agenda Detail fields as possible for which you have information.

Adding Contact History

Access the History Detail page (select 060 - Add History from the Go To drop-down list on the Staffing Information page).

Add a history item for the contact.

Entering Contact Related Employees

Access the Related Employees page (select 070 - Related Employees from the Go To drop-down list on the Staffing Information page).

Employee ID	Enter the ID of the employee who is related to the contact.
Comments	Enter a description of how the employee is related to the contact. For example, you may state that the contact requested this employee for many assignments due to excellent work performance.

Adding Target Qualifications

Access the Target Qualifications page (select 080 - Target Qualifications from the Go To drop-down list on the Staffing Information page).

This page view changes depending on which button you click. Each of the resulting pages functions similarly to corresponding pages described in the customer qualifications sections.

Entering Target Job Titles

Access the Target Job Titles page (select 090 - Target Job Titles from the Go To drop-down list on the Staffing Information page).

Job Category	Select a category that represents the general classification for which the customer is looking. Each job category has multiple job titles associated with it. For example, if you select the job category of Secretaries, only the job titles belonging to that category appear.
Job Title Code	Select a job title frequently requested by the customer. Only the job titles that belong to the category selected will appear in the search results.

Viewing and Adding Forms

Access the Forms page (select 100 - Forms from the Go To drop-down list on the Staffing Information page). This page lists all the forms previously associated with a contact record. From this page you can associate additional forms by clicking the Add a New Form button.

Form Code	Displays the code of the forms associated with a contact record.
Form Description	Displays the form associated with the contact record. Click the description to view the values for each form field.
View Form	Click the View Form link to view the detail of a previously added form.
Add New Form	Click the Add New Form button to associate additional forms with a contact record.

Adding New Forms

Access the Forms Detail page (click the Add New Form button on the Forms page).

Form Type	Displays the form type of CONT (contact form) by default for this component.
Form Code	Enter the code of the form that you want to associate with a contact. After you select a code, the system automatically loads the form definition. The form field names are automatically populated by Staffing Front Office from the form configuration.
Sequence	When the same form is associated multiple times with a contact, displays the sequence number of each form of the same code that was added.
Date	Enter the date that the form detail is effective, and then complete the form detail information.
Form Field Values	Enter the value of the form field.
Insert Row	Click the Insert Row button if another effective-dated row about details is needed.

Viewing and Adding Attachments

Access the Attachments page (select 110 - Attachments from the Go To drop-down list on the Staffing Information page).

Add	Click the Add link to browse for and upload attachments such as driving directions to the contact work site, contact work policy manuals, and so on.
View	Click the View link to view the attachments associated with the contacts.
Attached File	Enter the name or description of the attachment.
Attachment Type	Enter the type of attachment that you want to add for the contact. Attachment types are defined through system configuration.