This chapter discusses how to:
Create bills of lading and shipping manifests.
Print shipping reports.
Generate shipping documents before shipment
Create advanced shipping notices.
Create internal location expected receipts.
Create interunit expected receipts.
(IND) Create shipping excise invoices for India.
This section discusses how to:
Create a bill of lading report.
Create a shipping manifest report.
A bill of lading lists all items in a shipment destined for a particular ship to location. A shipping manifest lists all items in a given shipment, regardless of ship to address. You can combine bills of lading into shipping manifests.
When you create a new bill of lading or shipping manifest, you can enter a number or accept the default of NEXT. If you accept NEXT, PeopleSoft Inventory generates a number based upon the default setup in the Automatic Numbering page. If you select NEXT and no default sequence has been defined, the system displays an error.
Bill of Lading Reports
To generate the bill of lading (BOL) report, you can:
Use the Build Bill of Lading component to create BOLs online, one BOL at a time. You select each individual demand line to be included in the BOL and define the specific BOL information, such as; driver ID, vehicle ID, producer, or seal number. This method enables you to build or update individual BOLs to your exact requirements.
Use the Build Bill of Lading Request page to have an Application Engine process (IN_FUL_BOL ) build BOLs automatically by grouping the selected demand lines. This method enables you to create multiple BOLs at one time. The demand lines are grouped onto BOLs by load, route, carrier, ship via, ship to, address sequence number, and address fields (for overridden addresses). This process adds the commodity code, quantity shipped, shipping UOM, shipping weight, and shipping volume into the BOL definition. For export BOLs, the harmonized code is used instead of the commodity code. This process does not add driver ID, vehicle ID, producer, or seal number to the BOL; if needed, you can use the online Build Bill of Lading component to add this information.
For both methods of creating bill of ladings, the demand lines that can be selected are limited based on your setup. To create BOLs for demand lines in the fulfillment states of Unfulfilled, Releasable, Released, and Confirmed, you must select the Allow Printing Before Shipping check box in the Setup Fulfillment – Shipping page. If this check box is clear, then you can only build BOLs for demand lines in the Shipped and Depleted fulfillment states.
Note. You can never generate BOLs for demand lines in the fulfillment states of Pending or Cancelled.
See Also
Defining Inventory User Preferences
Setting Up Automatic Numbering
Page Name |
Definition Name |
Navigation |
Usage |
RUN_IN_FULFILL_BOL |
Inventory, Fulfill Stock Orders, Shipping, Build Bill of Lading Requests |
Enter search criteria and launch the IN_FUL_BOL Application Engine process to automatically create bill of lading reports for the selected demand lines. |
|
IN_BOL_PRNTOPT_SP |
Select the Report Options link on the Build Bill of Lading Requests page. |
Select options to print bill of ladings created by the Build Bill of Lading Requests process page. Use this page to identify the output type, format, and destination of the printed BOLs. In addition, you can select to print bar codes. |
|
BOL_HDR_INV |
Inventory, Fulfill Stock Orders, Shipping, Build Bill of Lading |
Create foreign or domestic bill of lading reports. Using this component, you will build one BOL at a time by selecting the demand lines to be included. |
|
BOL_SEL_INV_SP |
Click the Search button on the Bill of Lading page. |
Select orders to add to the bill of lading. |
|
INV_ADDRESS |
Click the Address link on the Bill of Lading page. |
View address information. Note. You cannot use this page to override the address. |
|
BOL_DETAIL_INV |
Inventory, Fulfill Stock Orders, Shipping, Build Bill of Lading, Domestic Details |
Calculate or enter the shipping weight and volume, by commodity code, for domestic shipments. |
|
BOL_DETAIL_EXP_INV |
Inventory, Fulfill Stock Orders, Shipping, Build Bill of Lading, Export Details |
Calculate or enter the shipping weight and volume, by harmonized code, for export sales orders or export intercompany transfers. |
|
BOL_EXPORT_INV |
Inventory, Fulfill Stock Orders, Shipping, Build Bill of Lading, Export Info |
Define consignee and transport information for export sales orders and export intercompany transfers. |
|
BOL_NOTE |
Inventory, Fulfill Stock Orders, Shipping, Create Bill of Lading Notes |
Define standard notes to print on a bill of lading. Note. This page is only available if the installation includes PeopleSoft Order Management. |
|
BOL_MANIFEST_INV |
Inventory, Fulfill Stock Orders, Shipping, Build Shipping Manifest |
Consolidate bills of lading onto a shipping manifest. |
Access the Build Bill of Lading Requests process page (Inventory, Fulfill Stock Orders, Shipping, Build Bill of Lading Requests).
This application engine process groups demand lines into BOLs by load, route, carrier, ship via, ship to, address sequence number, and address fields (for overridden addresses). This process adds the commodity code, quantity shipped, shipping UOM, shipping weight, and shipping volume into the BOL definition. For export BOLs, the harmonized code is used instead of the commodity code.
Clear Overrides After Each Run |
Select to remove all override entries from the run control process page after each run. Use this check box when the overrides, entered in the Overrides group box, should only apply to this process run. Do not select this check box if you want the same overrides used each time this run control is processed. |
Create Bill of Lading Types |
Select the type of BOL to be produced:
Note. PeopleSoft Inventory supports the creation of foreign bills of lading only for intercompany transfers. If the installation includes PeopleSoft Order Management, you can also create bills of lading for other foreign shipments. |
Export Order Option |
Select how to group demand lines onto an export bill of lading. The options are:
|
Print Bills of Lading |
Select this check box to print the BOLs produced by this process by launching the INS6100 SQR after this application engine process is complete. |
Report Options |
Click this link to access the Report Options page where you can identify the output type, format, and destination of the printed BOLs. In addition, you can select to print bar codes. |
Selection Criteria
Enter selection criteria to identify the demand lines to be added to the new BOLs created by this process. The check boxes available to select demand line fulfillment states are based on the setup in the Allow Printing Before Shipping check box.
Allow Printing Before Shipping |
Displays the value entered in the Allow Printing Before Shipping check box on the Setup Fulfillment-Shipping page. If this check box has been selected, then you can add demand lines that are in any fulfillment state except for Pending or Cancelled. If this check box is clear, then you can only add demand lines that are in the fulfillment states of Shipped and Depleted. Demand lines must have a Ship ID in order to be placed on a BOL. |
For the field descriptions on these selection criteria, see the Common Elements Used in This Chapter section of the Shipping Inventory chapter in this PeopleBook.
See Common Elements Used in This Chapter.
Overrides
Use the Carrier ID and Ship Via Code fields to override these values on all the demand lines selected by this process.
Access the Bill of Lading page (Inventory, Fulfill Stock Orders, Shipping, Build Bill of Lading).
Use this component to create domestic or foreign bills of lading. You build one BOL at a time by selecting the demand lines to be included.
To create a bill of lading:
Click the Search button to access the Bill of Lading Order Selection page, where you select lines to include on the bill of lading.
Demand lines meeting the search criteria appear in the scroll area in the lower portion of the page.
Select the check boxes for the demand lines that you want to include and then save the page.
To include all displayed lines, click the Select All button; to remove all lines, click the Deselect All button.
Allow Printing Before Shipping |
Displays the value entered in the Allow Printing Before Shipping check box on the Setup Fulfillment-Shipping page. If this check box has been selected, then you can add demand lines that are in any fulfillment state except for Pending or Cancelled. If this check box is clear, then you can only add demand lines that are in the fulfillment states of Shipped and Depleted. Demand lines must have a Ship ID in order to be placed on a BOL. The fulfillment state of each demand line is displayed in the Order Details group box. |
Bill of Lading Types |
Select the type of BOL to be produced:
Note. PeopleSoft Inventory supports the creation of foreign bills of lading only for intercompany transfers. If the installation includes PeopleSoft Order Management, you can also create bills of lading for other foreign shipments. |
Driver ID |
The identification of the driver. |
Seal Number |
The number of the seal. |
Vehicle ID |
The identification of the vehicle. |
Carrier ID |
The carrier transporting the shipment. |
Validate |
Click this button to verify that all the demand lines added to this BOL have the same ship to customer, location, carrier ID, and address. If these fields are not the same, an error is displayed. |
Validate and Calculate |
Click this button to:
|
Notes |
Click this link to access the Create Bill of Lading Notes page where you can define standard notes to print on this bill of lading. |
|
Click this link to print the Bill of Lading and Shipping Manifest reports from this page. You can only print the Shipping Manifest report from this page if the bill of lading has a shipping manifest number. |
See Also
Access the Bill of Lading Order Selection page (Click the Search button on the Bill of Lading page).
For domestic bills of lading, you must enter either a ship to or a location and carrier ID. For foreign or foreign and domestic bills of lading, you must enter an order number.
Ship To |
Select a ship to customer to narrow your search results. The list of available values is limited by your previous selections in the other fields on this page. |
Carrier ID |
Select a carrier ID to narrow your search results. Whether or not you enter a specific carrier ID, the system also returns demand lines with no defined carrier ID. If you add one of these lines to the bill of lading, then the system updates the carrier information for the line. |
Shipping ID |
Select a shipping ID to narrow your search results. The list of available shipping IDs is limited by your previous entries in the Ship To, Location, Load ID, and Carrier ID fields of this page. |
Delivery ID |
Enter a delivery ID to select order lines assigned to the delivery ID. A bill of lading can only contain lines from one delivery ID. Deliveries are logical groupings of order lines that can be shipped together. PeopleSoft Inventory and Order Management can use these groupings for pricing sales orders, adding freight charges, and packing shipping containers. Each delivery is assigned a unique delivery ID. See Understanding PeopleSoft Delivery Management and Freight Calculations. |
Order No |
Select and order number to narrow your search results. The list of available orders is limited by your previous entries in the Ship To, Location, Load ID, Carrier ID, and Shipping ID fields of this page. Demand lines with blank shipping IDs will also be included in the search results. |
Access the Domestic Details page (Inventory, Fulfill Stock Orders, Shipping, Build Bill of Lading, Domestic Details) or the Export Details page (Inventory, Fulfill Stock Orders, Shipping, Build Bill of Lading, Export Details).
Enter or calculate shipping information, using either the Domestic Details page or the Export Details page. All of the information on this page is optional, and much of it comes from customer information defaults, business unit defaults, and either the sales order or the intercompany transfer.
Calculator |
Click to enable PeopleSoft Inventory to calculate the Shipping Weight and Shipping Volume. These values are calculated using either the commodity code (for domestic shipments) or the harmonized code (for foreign shipments) assigned to the item, along with the shipping unit of measure (UOM), the shipping weight UOM, and the shipping volume UOM. You define this information on the Define Item - General: Dimensions page. |
Qty Shipped |
Displays the quantity that is expected to ship. If the BOL is created for demand lines that are in an earlier fulfillment state than Shipped, then the system is calculating the expected shipping quantity. This field displays:
|
See Also
Access the Build Shipping Manifest page (Inventory, Fulfill Stock Orders, Shipping, Build Shipping Manifest).
To create a shipping manifest:
Enter a business unit, shipping manifest number, carrier ID, or BOL Print Date (bill of lading print date), then click the Search button to find bills of lading that match these parameters.
Select the check box next to a Bill of Lading number to add it to the shipping manifest.
To add all returned bills of lading, click Select All; to clear all check boxes, click Deselect All.
Click the Bill of Lading Print button to print the selected bills of lading or the shipping manifest from this page.
Note. A shipping manifest only includes BOLs which have all demand lines in the fulfillment state of Shipped or Depleted.
See Also
Depending upon your business requirements, you may need to print various shipping documents. PeopleSoft Inventory provides the following reports:
Bill of Lading report (INS6100)
Shipping Manifest report (INS6200)
Shipping Document (INC6503)
Packing Slip (INS6500):
Export Pro Forma (INS6600)
Defer Invoicing (INS6700)
Canadian Customs Invoice (OMC6114)
NAFTA Certificate of Origin (OMC6112)
U.S. Certificate of Origin (OMC6111)
Shipper's Export Declaration (OMC6113)
Note. In order to print the Canadian customs invoice, NAFTA certificate of origin, U.S. Certificate of Origin, and shipper's export declaration reports, you must first run the Export Documentation Table Load (OMS6110) process to populate the OM_EXPORT_DOC table (the master table for the export documentation reports).
Allow Printing Before Shipping |
Displays the setup for this inventory business unit to enable shipping documentation to be created and printed early. To create or print shipping documents for demand lines in the fulfillment states of Unfulfilled, Releasable, Release, and Confirmed, the Allow Printing Before Shipping check box must be selected on the Setup Fulfillment – Shipping page. If this check box is clear, then you can only build and print shipping reports for demand lines in the Shipped and Depleted fulfillment states. |
Print Bar Code or Print Bar Code on Report Flag |
Select to print a bar code on the report. For the Bill of Lading report, this bar code is made up of the business unit and bill of lading number fields concatenated. For the Packing Slip report, the bar code prints only for interunit transfers and consists of the business unit, interunit ID, interunit line, and destination business unit fields concatenated. For both reports, the bar code can be used for the Interunit Receipt EIP. Establish the default setting on the Setup Fulfillment component. |
Page Break by Delivery ID |
If the delivery management feature has been enabled in this inventory business unit, you can select this check box to cause a page break between delivery IDs. Deliveries are logical groupings of order lines that can be shipped together. PeopleSoft Inventory and Order Management can use these groupings for pricing sales orders, adding freight charges, and packing shipping containers. Each delivery is assigned a unique delivery ID. See Understanding PeopleSoft Delivery Management and Freight Calculations. |
See Also
PeopleSoft Enterprise Supply Chain Management Integration PeopleBook
Defining Basic Fulfillment Defaults
Staging Interunit Transfers Using an Electronic Data Collection System
Page Name |
Definition Name |
Navigation |
Usage |
RUN_INC6503 |
Inventory, Fulfill Stock Orders, Shipping Reports, Shipping Document |
Enter search criteria and launch this process to print shipping documents. This report provides a copy of the orders and order lines shipped in a specific shipping ID. This report is written in Oracle XML Publisher using the XMLP report name INX6503. |
|
RUN_INS6100 |
Inventory, Fulfill Stock Orders, Shipping Reports, Bill of Lading |
Enter search criteria and launch this process to generate one or more bills of lading. The bill of lading report lists the demand lines consolidated into one shipment and summarizes, by destination, the total cartons and weight for each order and provides a summary total at the end of the report. The report can include either domestic or export bills of lading that were defined using the Build Bill of Lading component or created by the Build Bill of Lading Requests process. |
|
RUN_INS6200 |
Inventory, Fulfill Stock Orders, Shipping Reports, Shipping Manifest |
Enter search criteria and launch this process to generate shipping manifests. This process prints shipping manifests created on the Build Shipping Manifest page. A shipping manifest includes one or more bills of lading that have been consolidated into a single shipment, regardless of the ship to address. |
|
RUN_INS6500 |
Inventory, Fulfill Stock Orders, Shipping Reports, Packing Slip |
Enter search criteria and launch this process to print packing slips. Packing slips lists the order number, ship to address, and item information for shipping. Print packing slips for all stock requests in a business unit or for an individual order number. The bar code prints on this report only for interunit transfers. |
|
RUN_INS6600 |
Inventory, Fulfill Stock Orders, Shipping Reports, Export Pro Forma |
Enter search criteria and launch this process to print export pro forma reports. An export pro forma is a special invoice often requested by European customs officials to verify consignment details for export and import duty clearance. Unless you select a specific order, the report extracts all shipped sales orders and intercompany transfers belonging to this business unit and shipping ID (including those that have not yet been depleted). |
|
RUN_INS6700 |
Inventory, Fulfill Stock Orders, Shipping Reports, Defer Invoicing |
Enter search criteria and launch this process to print defer invoicing reports. This report lists all shipments not yet invoiced; enabling you to monitor your compliance with Italian law regarding deferred invoicing for shipments within Italy or involving third parties. This report can also be used for any similar requirements. |
|
RUN_OMC6114 |
Inventory, Fulfill Stock Orders, Shipping Reports, Canada Customs Invoice, Canada Customs Inv |
Enter search criteria and launch this process to provide documentation for orders requiring a Canadian customs invoice. This is a Crystal report. Before you can print this report, you must run the Export Doc Tbl Load page (export document table load page). |
|
RUN_OMC6112 |
Inventory, Fulfill Stock Orders, Shipping Reports, NAFTA Cert of Origin |
Enter search criteria and launch this process to provide documentation for orders requiring a NAFTA origin certificate. This is a Crystal report. Before you can print this report, you must run the Export Doc Tbl Load page (export document table load page). |
|
RUN_OMC6111 |
Inventory, Fulfill Stock Orders, Shipping Reports, U.S. Certificate of Origin |
Enter search criteria and launch this process to provide documentation for orders requiring U.S. origin certification. This is a Crystal report. Before you can print this report, you must run the Export Doc Tbl Load page (export document table load page). |
|
RUN_OMC6113 |
Inventory, Fulfill Stock Orders, Shipping Reports, Shipper's Export Declaration |
Enter search criteria and launch this process to generate export declaration documentation for orders. This is a Crystal report. Before you can print this report, you must run the Export Doc Tbl Load page (export document table load page). |
|
RUN_OMS6110 |
Inventory, Fulfill Stock Orders, Shipping Reports, Load Export Doc Table |
Initiate the SQR that reads all of the bill of lading and shipment tables and then loads the data for the corresponding bills of lading into the OM_EXPORT_DOC table (the master table for the export documentation reports). |
PeopleSoft Inventory gives you the ability to print shipping documents at any time in the fulfillment cycle, including prior to shipment. This enables you to generate and review your shipping documents before the material actually leaves your premises. The shipping documents can be generated when the demand line is in any fulfillment state, except for Pending or Cancelled.
The following shipping documents can be printed before the fulfillment states of Shipped or Depleted:
Bill of Lading (INS6100)
Packing Slip (INS6500)
Shipping Document (INC6503)
NAFTA Certificate of Origin (OMC6112)
US Certificate of Origin (OMC6111)
Shipper's Export Declaration (OMC6113)
To enable users to print shipping documents early, you must select the Allow Printing Before Shipping check box in the Setup Fulfillment – Shipping page.
See Defining Shipping Options.
A shipping ID must be attached to the demand line in order to print the shipping documents earlier than the fulfillment states of Shipped or Depleted. You can add a shipping ID to the demand line by:
Using the Ship ID Maintenance page.
This page enables you to add demand lines to a current or new shipping ID. The demand lines can be in any fulfillment state except for Pending or Cancelled.
Using the Shipping ID override fields.
You can use the shipping ID override to apply a specific shipping ID to the selected demand lines. The Shipping ID field for overrides is included on the following process pages; Picking Confirmation, Shipping Requests, and Front End Shipping Requests. The override field is also available on the Material Picking Feedback page, the Packing Session page, and the Picking/Shipping Overrides page of the Fulfillment Workbench.
In addition, for demand lines in the Confirmed fulfillment state, you can use the Shipping/Issues component to assign shipping IDs and move the demand line to the Shipped state.
When you add a ship ID to a demand line, the system validates the information using the following rules:
A single-ship sales order can only have one ship ID for the entire order.
If a product kit must be kept as a whole unit, then only one ship ID can be assigned to all of the component kit demand lines.
If a shipping container is assigned a ship ID, then all demand lines and other shipping containers within it are assigned the same ship ID.
If the Partial Orders Can Ship check box is clear on the demand line, then the whole order must be confirmed before it is shipped, however it can use separate ship IDs.
Note. Demand lines in the Depleted fulfillment state cannot be removed from a ship ID.
Using the Message Dashboard functionality, the system can produce warnings at shipping time if the information on the previously printed shipping documents does not match the current shipping information. The system compares a number of fields based on the specific shipping document. The comparison includes; item ID, quantity shipped, ship ID and line, carrier ID, ship via, ship to customer and address, export flag, and scheduled shipment date and time. The warning can be generated from the Shipping/Issues component, the Front-End Shipping Request process page, the Shipping Requests process page, and the Fulfillment Requests process page (for EIPs or the Fulfillment Workbench). All of the process pages can generate an entry in the message log of the Process Monitor when previously printed shipping documents do not match the current shipment. For the Shipping/Issues Component, an online warning is displayed. In all cases, a warning is displayed in the Message Dashboard and the system can be set up to generate an email or worklist. Warnings are also generated from the Ship ID Maintenance Page when adding or removing demand lines, or when the user opens a ship ID and clicks the Validate Shipment button. The warnings can be viewed on the Message Dashboard, a user's worklist, or sent as an email to the appropriate user. Once the warning is issued, it is up to the user to make corrections and reprint the shipping documents.
When shipping documents are created or printed early, the system stores this information for each demand line in the IN_SHIP_DOC_TRK table. This table is a child of the inventory demand fulfillment table (IN_DEMAND). During the shipping process, the system compares the current shipping information to the information stored in the table. The inventory shipping document tracking table (IN_SHIP_DOC_TRK) collects the following shipping information about a demand line for comparison:
Report ID, date and time.
Quantity printed on the shipping documents that were printed earlier.
Ship ID and line number.
Export Flag code
The original item ID and the substitute item ID.
Carrier ID
Ship Via
Scheduled shipment date and time.
Ship To customer ID and the address sequence number.
Address override information
To turn on the warnings feature, you must:
Select the Alert User if Shipment Changes check box and the Clear Tracking Info at Deplete check box in the Setup Fulfillment – Shipping page. These check boxes activate and maintain the warning messages by populating and clearing the inventory shipping document tracking table (IN_SHIP_DOC_TRK).
Set up the message registry and notifications for the warnings; the process name is IN_SHIPPING and the category is REPRINT_REPORT.
See PeopleSoft Events and Notifications Framework 9.1 PeopleBook
Inquiries
The following inquiry pages display the Ship ID added to each demand line:
Fulfillment Status
InterUnit Stock Status
Reserved Material Stock
Stock Requests
Shipping Backlogs
Page Name |
Definition Name |
Navigation |
Usage |
IN_SHIP_ID_MAINT |
Inventory, Fulfill Stock Orders, Shipping, Maintain Shipping IDs |
Assign demand lines to a shipping ID in order to print various shipping documents before the Shipped or Depleted fulfillment states. |
|
Shipment Selection Criteria |
IN_SHIP_ID_MAINT |
Select the Search for Unassigned Orders link on the Maintain Ship IDs page. |
Enter search criteria to select demand lines for the Maintain Ship IDs page. Search criteria include the following fields; Ship To Customer, Location Code, Carrier ID, Ship Via Code, Load ID, and Fulfillment State (of the demand line). In addition, you can enter a range of order numbers or a range of scheduled shipment dates and times. Click the OK button to place the search results in the Unassigned Orders group box on the Maintain Ship IDs page. |
Access the Maintain Ship IDs page (Inventory, Fulfill Stock Orders, Shipping, Maintain Shipping IDs).
This page updates:
The SHIP_HDR_INV table.
The IN_DEMAND table. This table stores the SHIP_ID on the demand lines.
The SHIP_CNTR_HDR table when the demand lines are in a ship container.
Search for Unassigned Orders |
Select this link to access the Shipment Selection Criteria page where you can enter search criteria for the demand lines to be displayed in the Unassigned Orders group box of this page. |
Shipping Override group box
Enter carrier ID, ship via, freight terms, or scheduled shipment date and time, then click the Apply Changes button to add these values to the demand lines in the Assigned Orders group box. The demand lines are changed when you save this page.
When changing the Carrier ID or Ship Via values on a demand line, be aware that this could impact the current values in the Load ID or Route ID fields for that line. The system issues an online warning when the load ID or route ID will be changed due to a change in the Carrier ID or Ship Via fields.
When changing the scheduled shipment date and time, the system issues an online warning that this invalidates the route ID; if you continue then the system removes the value in the Route ID field on the demand lines.
Weight and Volume
The Shipment Weight and Shipment Volume fields display the current weight and volume of all demand lines assigned to this ship ID. These values use the Weight UOM and Volume UOM defined on the Setup Fulfillment page for the inventory business unit.
See Defining Basic Fulfillment Defaults.
Validate Shipment
Click the Validate Shipment button to check the shipping information for changes in critical fields. If previously printed shipping documents to do not match the current shipping information, the system can produce an online warning and a warning in the Message Dashboard. You must set up the Message Dashboard functionality to receive any warnings.
See PeopleSoft Events and Notifications Framework 9.1 PeopleBook
Assigned Orders
This group box displays the demand lines that are currently part of the ship ID.
Remove from Shipment |
To remove demand lines from this ship ID, select the lines and click this button. Demand lines with the fulfillment state of Depleted cannot be removed from the ship ID. |
Details |
Click this link to access the Stock Requests inquiry page for this demand line. |
Unassigned Orders group box
This group box displays demand lines that are not part of the ship ID but have met the search criteria that you have entered on the Shipment Selection Criteria page.
Add to Shipment |
To add demand lines to this ship ID, select the lines and click this button. Save the page to finalize your additions. When you add a ship ID to a demand line, the system validates the information using the following rules:
|
Details |
Click this link to access the Stock Requests inquiry page for this demand line. |
When this page is saved, the system performs a check and displays a warning if a ship ID has been modified after shipping documents have been printed. The system compares the current shipping information to any previously printed shipping documents for the Ship ID. The system compares item ID, quantity shipped, ship ID and line, carrier ID, ship via, ship to customer and address, export flag, and scheduled shipment date and time. If differences are found between the current information and the information printed on the shipping documents, then the system can launch a warning using the Message Dashboard functionality.
See Generating Shipping Documents Before Shipment.
The Advanced Shipping Notice (ASN) EIP is an asynchronous outbound service operation to notify your customers that a sales order has been shipped. The data from this service operation is passed to an external system or to the PeopleSoft CRM Field Service and CRM Order Capture applications. The Advanced Shipping Notice EIP meets X.12 EDI requirements of the 856−Shipping Notice/Manifest transaction set, and is also used with warehouse management systems. An ASN transaction is generated when a sales order entered from PeopleSoft Order Management has been depleted in PeopleSoft Inventory. You can specify whether to generate the ASN for all sales order shipments in the business unit, sales orders for a specific sold to customer, sales orders for a specific ship to customer, sales orders belonging to a specific shipping ID, or sales orders belonging to a specific delivery ID.
The system does not create an ASN transaction under these circumstances:
The shipment has not been through the depletion process. You can launch the depletion process using the Deplete On Hand Qty Requests process, the Shipping/Issues-Order Summary page, the Express Issue page, the Front End Shipping process, or the Shipping process.
The order is a direct ship from vendor sales order.
The order is for a non-inventory item.
The transaction has a demand source other than PeopleSoft Order Management.
PeopleSoft Order Management is not installed.
See Also
Processing Enterprise Integration Points (EIPs)
Processing Enterprise Integration Points (EIPs)
Page Name |
Definition Name |
Navigation |
Usage |
Batch Publish Rules |
EO_MSGPUBATCH |
Enterprise Components, Integration Definitions, Batch Publish Rules |
Set up publication rules. You must activate a publish rule for the publication messages you create to follow. This rule includes instructions on message chunking, if necessary. |
Add Nodes to Chunk Rule |
EO_ADNODECHUNK_PNL |
Enterprise Components, Integration Definitions, Map Chunking Rules, Node to ChunkRule |
Map PeopleSoft Application Messaging nodes to chunking rules. (A node is a PeopleTools object that represents a publishing or subscribing system on the message network. A message node often relates to an application server or database name.) |
Contact |
CONTACT |
Customers, Contact Information |
Maintain information about each contact. |
Contact Customer |
CONTACT_CUST_PAGE |
Click the Contact Customer Information link on the Contact page. |
Build the relationship between the contact and the different customer IDs the contact serves or is associated with. If the contact is only associated with one customer, enter that customer on this page. If the contact is a broker, for example, use this page to establish the relationships with the multiple customers that the broker serves. Set up security options on the Self Service Security tab. |
Inventory Definition - Business Unit Options |
BUS_UNIT_INV5 |
Set Up Financials/Supply Chain, Business Unit Related, Inventory, Inventory Definition, Business Unit Options |
Turn on the Advanced Shipping Notices EIP by selecting the Use Advanced Shipping Notice check box. |
Advanced Shipping Notices Selection Criteria |
IN_RUN_SHPNTC_ASN |
SCM Integrations, Publish Outbound Messages. On the Publish Outbound Message page, select the Advanced Shipping Notices check box, and then click the Advanced Shipping Notices link. |
Generate an ASN transaction to notify customers that a stock has been shipped. |
To use the Advanced Shipping Notice EIP:
PeopleSoft delivers the service operations in PeopleSoft Integration Broker with a default status of Inactive. You must activate each service operation before attempting to send or receive data from a third-party source or another PeopleSoft system, such as CRM. To set up this service operation:
Set up within the PeopleSoft SCM applications:
Select the Use Advanced Shipping Notice check box for the business unit on the Inventory Definition-Business Unit Options page
Associate customers receiving the Advanced Shipping Notice EIP messages with an ASN document code and a preferred communication value of XML Only or XML and Print. If PeopleSoft Order Management is installed, then define these values on the Contact Additional Info page in the Contact Information component.
Set up within PeopleSoft Integration Broker and Enterprise Components:
Use the information in the table below and refer to the setup instruction in the PeopleSoft Supply Chain Management Integrations 9.1 PeopleBook, "Implementing Integrations" chapter, Setting Up Service Operations section.
Service Operation |
Direction and Type |
Handlers |
Chunking Available? |
Integrates With |
ADVANCED_SHIPPING_NOTICE |
Outbound Asynchronous |
ROUTERSENDHDLR |
Yes |
Third-party system |
See Also
Enterprise PeopleTools PeopleBook: Integration Broker
Access the Advanced Shipping Notices Selection Criteria page (SCM Integrations, Publish Outbound Messages. On the Publish Outbound Message page, select the Advanced Shipping Notices check box, and then click the Advanced Shipping Notices link).
All Shipments |
Select to generate this transaction for all sales order shipments that have been through the Deplete On Hand Qty (Depletion) process, but have not previously generated an ASN. |
Sold To Customer |
Select to generate this transaction for a sales order with a specific sold to customer. |
Ship To Customer |
Select to generate this transaction for a sales order with a specific ship to customer. |
Specific Shipping ID |
Select to generate this transaction for sales orders with a specific shipping ID. |
Delivery ID |
Select to generate this transaction for sales orders with a specific delivery ID. |
Source Bus Unit |
Select a valid source business unit. A source business unit is the PeopleSoft Order Management business unit that created the sales order. This field is required if you elect in the Selection Options group box to generate this transaction for a specific sold to or ship to customer. This field is not available for entry if you elect in the Selection Options group box to generate this transaction for all shipments, or for a specific shipping ID. |
Sold To Customer |
Select a valid sold to customer. This field is only available for entry and is required if you elect in the Selection Options group box to generate this transaction for a specific sold to customer. |
Ship To Customer |
Select a valid ship to customer. This field is only available for entry and is required if you elect in the Selection Options group box to generate this transaction for a specific ship to customer. |
Shipping ID |
Select a valid shipping ID. This field is only available for entry and is required if you elect in the Selection Options group box to generate this transaction for a specific shipping ID. |
Delivery ID |
Select a valid delivery ID. This field is only available for entry and is required if you elect in the Selection Options group box to generate this transaction for a specific delivery ID. |
Re-Generate Message |
Select this option to regenerate a message for sales orders that have already been sent out. |
Note. When you navigate to the process monitor and wait till the process completes successfully, you can click the Details link and then the View Log/Trace link. This shows the output file as a link. The system generates the flat file to reflect the ASN information for the corresponding shipping ID.
The Internal Location Expected Receipt EIP is an asynchronous outbound service operation that sends a receipt transaction when an internal material stock request is depleted. Internal material stock requests are created to fulfill demand from a storage location within the Inventory business unit. Typically, you use the Internal Location Expected Receipts EIP when integrating with third-party point-of-use (POU) supplier systems or surgical resource management systems that manage supplies stored in internal par locations. The third-party system can use the data contained in this EIP to manage receiving and restocking activities at the destination location. The Internal Location Expected Receipts EIP is also used with surgical resource software and point of use applications.
See Also
Processing Enterprise Integration Points (EIPs)
Page Name |
Definition Name |
Navigation |
Usage |
IN_RUN_SHPNTC_IL |
SCM Integrations, Publish Outbound Messages. Select Internal Location Exp Receipts check box on the Publish Outbound Message page to enable the Internal Location Exp Receipts link. Click the Internal Location Exp Receipts link. |
Launch the Internal Location Expected Receipts outbound transaction for internal issue orders that have been depleted. |
PeopleSoft delivers the service operations in PeopleSoft Integration Broker with a default status of Inactive. You must activate each service operation before attempting to send or receive data from a third-party source or another PeopleSoft system, such as CRM. To set up the Internal Location Expected Receipt service operation:
Set up within the PeopleSoft Inventory application:
Select the Use Internal Expected Receipt check box on the Inventory Definition - Business Unit Options page.
Set up within PeopleSoft Integration Broker and Enterprise Components:
Use the information in the table below and refer to the setup instruction in the PeopleSoft Supply Chain Management Integrations 9.1 PeopleBook, "Implementing Integrations" chapter, Setting Up Service Operations section.
Service Operation |
Direction and Type |
Handlers |
Chunking Available? |
Integrates With |
INTERNAL_LOC_EXPECTED_RECEIPT |
Outbound Asynchronous |
ROUTERSENDHDLR |
Yes |
Third-party point-of-use supplier systems or surgical resource management systems |
See Also
Enterprise PeopleTools PeopleBook: Integration Broker
Access the Internal Location Expected Receipts Selection Criteria page (SCM Integrations, Publish Outbound Messages. Select Internal Location Exp Receipts check box on the Publish Outbound Message page to enable the Internal Location Exp Receipts link. Click the Internal Location Exp Receipts link).
Note. You can launch the internal location expected receipts outbound transaction only for PeopleSoft Inventory business units that have enabled the Use Internal Expected Receipt option on the Inventory Definition - Business Unit Options page.
All |
Select to generate an expected receipt for all internal issue shipments in a business unit. |
Specific |
Select to generate an expected receipt for internal issue shipments for a specific shipping ID. |
Shipping ID |
Select a shipping ID. This field is available for entry only if you elect in the Shipment Selection group box to generate an expected receipt for a specific shipping ID. |
Location |
Select a location option for which you want to generate an expected receipt. Options are: All Locations: Select to generate an expected receipt for all locations. All Par Locations: Select to generate an expected receipt for all par locations. All Par Locations for Unit: Select to generate an expected receipt for all par locations for a specific business unit. Specific Location: Select to generate an expected receipt for a specific location. Specific Par Location: Select to generate an expected receipt for a specific par location. Specific Par Location Group: Select to generate an expected receipt for a specific par location group. |
Location Code |
Select a location code. This field is available for entry only if you elect in the Location field to generate an expected receipt for a specific location. |
Source Bus Unit (source business unit) |
Select the source business unit that created the internal issue order, usually represented by the par location business unit. This field is available for entry only if you elect in the Location field to generate an expected receipt for all par locations for a specific business unit, for a specific par location, or for a specific par location group. |
Par Location ID |
Select a par location ID. This field is available for entry only if you elect in the Location field to generate an expected receipt for a specific par location. |
Par Location Group |
Select a par location group ID. This field is available for entry only if you elect in the Location field to generate an expected receipt for a specific par location group. |
Re-Generate Message |
Select this option to regenerate a message for orders that have already been sent out. |
Note. Select the Re-Generate Message check box to create a second internal location expected receipt message for a selected shipment. This option is for instances where the destination node did not receive the original message.
See Also
Activating Optional Business Unit Features
The InterUnit Expected Receipt EIP is an asynchronous outbound service operation that notifies a third-party system that an Inventory business unit has shipped an interunit transfer order. The Interunit Expected Receipt EIP meets X.12 EDI requirements of the 943 − Warehouse Stock Transfer Shipment Advice transaction set and is also used with warehouse management systems. Interunit transfer orders are created in PeopleSoft to move stock between Inventory business units. Typically, you use the Interunit Expected Receipt EIP in integrated implementations in which a third-party system is controlling an Inventory business unit. Transactional data is generated when an interunit transfer order with a destination business unit that is under external warehouse control is depleted. The third-party system can use the data from the interunit expected receipt EIP to validate the receipt of goods when the shipment arrives at the destination warehouse.
See Also
Processing Enterprise Integration Points (EIPs)
Page Name |
Definition Name |
Navigation |
Usage |
IN_RUN_SHPNTC_IU |
SCM Integrations, Publish Outbound Messages. Select Interunit Expected Receipts check box on the Publish Outbound Message page to enable the Interunit Expected Receipts link. Click the Interunit Expected Receipts link. |
Launch the Interunit Expected Receipts outbound transaction for interunit transfer orders that have been depleted and not yet received. |
PeopleSoft delivers the service operations in PeopleSoft Integration Broker with a default status of Inactive. You must activate each service operation before attempting to send or receive data from a third-party source or another PeopleSoft system, such as CRM. To set up the InterUnit Expected Receipt service operation:
Set up within the PeopleSoft Inventory application:
Select the Use External Warehouse Control check box on the Inventory Definition-Business Unit Options page.
Set up within PeopleSoft Integration Broker and Enterprise Components:
Use the information in the table below and refer to the setup instruction in the PeopleSoft Supply Chain Management Integrations 9.1 PeopleBook, "Implementing Integrations" chapter, Setting Up Service Operations section.
Service Operation |
Direction and Type |
Handlers |
Chunking Available? |
Integrates With |
INTERUNIT_EXPECTED_RECEIPT |
Outbound Asynchronous |
Yes |
Third-party system |
Chunking
Chunking is only needed if you have requirements to break up the messages and send them to different destinations based on attributes in the message such as business unit or location. If you want to chunk by business unit, then activate the INTERUNIT_EXPECTED_RECEIPT batch publish rule and enter the BUSINESS_UNIT chunk rule.
The BUSINESS_UNIT chunking rule may be overridden with a custom chunking rule if the business units used for the INTERUNIT_EXPECTED RECEIPT EIP have different node designations then that set for other messages. You must also assign the IN_DEST_BU_EOV alternate chunk table to the Batch Publish Rule. This entry is needed because the BUSINESS_UNIT chunk table is keyed by a field named BUSINESS_UNIT and when you chunk by the destination business unit, the Batch Publish Utility needs to match the business unit values entered in the BUSINESS_UNIT chunk rule with the values in the DESTIN_BU field on the Interunit Expected Receipt Header segment (IN_IU_ER_HD_EVW.DESTIN_BU). The Alternate Chunk Table entry on the Batch Publish Rule is used by the Batch Publish Utility to identify this type of situation. The IN_DEST_BU_EOV record is prepackaged for this purpose.
See Also
Enterprise PeopleTools PeopleBook: Integration Broker
Access the Interunit Expected Receipts Selection Criteria page (SCM Integrations, Publish Outbound Messages. Select Interunit Expected Receipts check box on the Publish Outbound Message page to enable the Interunit Expected Receipts link. Click the Interunit Expected Receipts link).
Transactions |
Select New to generate an expected receipt for new interunit transfer orders that have been depleted but not sent out in a previous message. Select Closed/canceled to generate an expected receipt for interunit transfer orders that have been previously sent in a message and have subsequently been closed or canceled. |
Shipments |
Select All to generate an expected receipt for all shipments for a business unit. Select Specific and enter a Shipping ID to generate an expected receipt for a specific shipping ID. |
Shipping ID |
Select a valid shipping ID. This field is available for entry only if you elect to generate an expected receipt for a specific shipment ID. |
Destination Unit |
Select All to generate an expected receipt for all destination business units. Select Specific to generate an expected receipt for a specific destination business unit. |
Unit |
Select a valid destination business unit. This field is available for entry only if you elect to generate an expected receipt for a specific destination business unit. |
Re-Generate Message |
Select this option to regenerate a message for orders that have already been sent out. |
Note. Select the Re-Generate Message check box to create a second interunit expected receipt message for selected shipments. This option is for instances where the destination node did not receive the original message.
See Also
Processing Enterprise Integration Points (EIPs)
This section discusses how to:
Enter a shipping excise invoice for India.
Print a shipping excise invoice for India.
For shipments from a business unit located in India, the shipping excise invoice performs tax determination and tax calculation based on information from the IN_DEMAND table where all inventory shipments are recorded. Create a shipping excise invoice for India whenever Indian excise duty applies to a shipment from a PeopleSoft Inventory business unit for these transactions:
Sales orders from PeopleSoft Order Management.
Interunit transfers (material stock requests) moving stock between two different tax locations within PeopleSoft Inventory.
Return to Vendor transactions.
Before you can create a shipping excise invoice, you must define these parameters:
Add one or more excise document number series to create a unique serial number for each shipping excise invoice when saved.
If Depletion Check is selected on the Tax Location - Excise Group page for the PeopleSoft Inventory business unit, then the Deplete On Hand Qty (Depletion) process must be completed for the Shipping ID line before you can create the shipping excise invoice. If Depletion Check is not selected, then the shipping excise invoice can be created before you run the Deplete On Hand Qty (Depletion) process.
Note. If only sales tax or VAT tax (value added tax) are applicable, you cannot create a shipping excise invoice. Even without an excise invoice, the system still calculates sales tax or VAT tax in PeopleSoft Order Management and Billing. A shipping excise invoice is only necessary if excise duty is applicable to the shipment.
To create a shipping excise invoice:
Access the Shipping Excise Invoice page, enter the PeopleSoft Inventory business unit and the excise document number series for the new shipping excise invoice.
If you are changing an existing shipping excise invoice, enter the PeopleSoft Inventory business unit and select by excise invoice number. To update a shipping excise invoice, it must have a status of New. Shipping excise invoices that are in Ready or Post status can be viewed but not updated.
On the Shipping Excise Invoice page, click the Add New Lines link to access the Select Shipping Lines page.
Use the Select Shipping Lines page to find and select the shipped items to be added to the excise invoice. You can search by ship to customer, customer address, source unit, location code, bill to customer, order number, and shipping ID. After entering the search criteria, click the Search button to display available shipping lines. Select the lines to be added to the excise invoice and press the Return key to include the shipping lines on the Shipping Excise Invoice page. All lines added to one shipping excise invoice must have the same Tax Transaction Type. One shipping excise invoice could contain shipping lines from more than one shipping ID. Also, the lines from one shipping ID could be split between different shipping excise invoices. If the sales order includes a product kit, then the order must be shipped by using only one shipping ID; otherwise, PeopleSoft Billing cannot properly invoice the order. A product kit order cannot be shipped with multiple shipping IDs.
On the Shipping Excise Invoice page, review and enter data, then save.
If a valid tax rate code is found, the tax amounts are calculated when you return to the Shipping Excise Invoice page. If a tax rate code is not found, you must select one manually and click the Calculate Tax button. Taxes are also calculated when you save the page. If the setup allows the shipping excise invoice number to be overwritten, then the user can enter a user-defined value for the invoice number. Alternately, the system can assign a unique excise invoice number based on the excise transaction type and the excise document number series that you entered and saved on the shipping excise invoice.
If you add additional lines to the shipping excise invoice after saving, click the Calculate Tax button to recalculate the excise duty for the new lines that you added.
Once you have saved the shipping excise invoice, you can print a copy to accompany the shipment.
In order to print the shipping excise invoice, you need to set the status of the invoice to Ready. You can only print invoices that have a status of Ready or Post.. The invoice is printed when you click the Print button on the Shipping Excise Invoice page or on the Excise Invoice Report process page. Once printing is complete, the Print flag is set to Y, and any additional prints are identified as duplicates.
When the Register Update process completes the Excise Quantity Register Update subprocess, then the Qty Upd Flg check box is selected on the Shipping Excise Invoice page.
When you save the Shipping Excise Invoice page or click the Calculate Tax button, the tax determination and tax calculation processes apply the needed excise duty, sales tax, or VAT tax to the shipping excise invoice. Use the excise duty to update the tax registers and create accounting entries in PeopleSoft Inventory. The sales tax or VAT tax on a shipping excise invoice is passed to the sales order and then to PeopleSoft Billing, which creates the accounting entries.
Note. To cancel a shipping excise invoice that you have created, the status of the excise invoice must be New and the invoice cannot contain any shipping lines. If you cannot cancel the shipping excise invoice, then you must make an excise adjustment to reverse it.
Sample Sale
When issuing samples from the PeopleSoft Inventory unit located in India, often the material stock request (or sales order) does not contain a sales price. However, excise duty is still payable on samples shipped. To properly calculate excise duty, use the item's assessable value as the base amount. Select the Use Assessable Value check box on the Tax Rate Code page to enable the system to find a base amount on the Item Defn Tax Applicability page or the Product Tax Applicability page.
Product KIT Sale
Excise duty is payable on the product kit and not on the individual components. Based on the tax structure, the excise duty is calculated on the kit's sales price or the assessable value maintained on the Product Tax Applicability page. Before a product kit can be added to a shipping excise invoice, the system verifies that all kit components have been shipped in the proper quantities. The excise invoice displays all kit components and their related quantities. A product kit order cannot be shipped with multiple shipping ID's.
Page Name |
Definition Name |
Navigation |
Usage |
Inventory, Fulfill Stock Orders, Shipping Excise IND, Shipping Excise Invoice |
Add or update shipping excise invoices by adding order lines to this page. The system calculates the excise duty, and save the shipping excise invoice under a unique excise invoice number. Click the Print button to print the excise invoice. |
||
EXD_SHP_INV_SRCH |
Click the Add New Lines link on the Shipping Excise Invoice page. |
Use to select the shipping lines to add to the shipping excise invoice. |
|
RUN_INS6800 |
Inventory, Fulfill Stock Orders, Shipping Excise IND, Shipping Excise Invoice Report |
Prints a copy of the shipping excise invoice to accompany the item shipment from PeopleSoft Inventory. If more than one copy is printed, the subsequent copies are marked as duplicates. |
|
RUN_OM_EXS_APP_CHK |
Inventory, Fulfill Stock Orders, Shipping Excise IND, Tax Applicability |
Run the Applicability Check process, which checks each ship line to determine if excise duties, sales taxes, or VAT taxes are applicable. Specify a business unit or all ship lines for all business units will be selected. |
See Also
(IND) Processing Customs, Excise Duties, Sales Tax, and VAT for India
Access the Shipping Excise Invoice page (Inventory, Fulfill Stock Orders, Shipping Excise IND, Shipping Excise Invoice).
Excise Invoice Header
Unit |
Enter the PeopleSoft Inventory business unit that shipped the stock. |
Invoice (Excise Document Number) |
Displays the excise invoice number assigned to this shipping excise invoice. The number is from the Excise Document Number Series and the PeopleSoft Inventory business unit defined in the Unit field. The system validates the appropriate tax location for the unit to identify the format for the document number, such as prefix and length. If the Overwrite Allowed check box has been selected on the Excise Document Number Series page, then the user is allowed to add the invoice number. If the overwrite option has not been selected, the excise invoice number field displays NEXT until you save the shipping excise invoice. |
Date |
Displays the date this shipping excise invoice was created. When adding a new excise invoice, the system automatically uses the current system date. This value cannot be changed. |
Nbr Ser (excise document number series) |
Enter the excise document number series to be used to create a unique excise invoice number for this transaction. For shipping excise invoices, you are limited to the number series defined using one of the following excise transaction types: Domestic Sales, Export with Bond, Export without Bond, Deemed Export with Bond, Deemed Export, Manual, Inter-Unit Sale, or Stock Transfer. |
Ship To |
If the shipment was based on a sales order, this field displays the ship to customer ID from the shipping ID assigned to the sales order. If the shipment was based on an interunit transfer that crosses different tax locations but not different general ledger business units, then this field is unavailable. |
View Address |
Select to view the shipping address of the Ship To Customer ID. The address that appears (and used) is the address specified for the address sequence number selected, not any address overrides entered. |
The Rate Type, Currency Rate Divider, and Currency Rate Multiplier are from the sales order header linked to the shipping lines added to this excise invoice.
Add New Lines |
Click this link to access the Select Shipping Lines page, where you can search and select the shipping lines to be added to this shipping excise invoice. |
|
Click this button to print the completed shipping excise invoice. The invoice must have a status of Ready or Posted to be printed. |
Status |
Displays the status of the shipping excise invoice. Values are: N (new): The excise invoice has been entered and saved. The user can return to the Shipping Excise Invoice page and make further changes to the excise invoice. R (ready to post): The excise invoice has been entered and the user has manually changed the status to ready. The user can no longer make changes to the excise invoice. P(post): The excise invoice has completed the Excise Invoice Posting subprocess of the Register Update process. C (cancel): The excise invoice has been canceled. Canceled invoices are saved for audit purposes and to insure the invoice numbers are sequential. |
Excise Transaction Type |
Displays the type of transaction to be entered. For shipping excise invoices, the values are: Domestic Sales Export with Bond Export without Bond Deemed Export Deemed Export with Bond Manual Stock Transfer |
Quantity Update Flag |
Indicates the shipping excise invoice has completed the Excise Quantity Register Update subprocess of the Register Update process. |
Print Flag |
Indicates the shipping excise invoice has been printed. Any additional prints are identified as duplicates. |
Total Taxes
Tax information is summarized for this shipping excise invoice.
Total Tax |
Displays the combined excise tax, sales tax, and VAT tax for all lines in this shipping excise invoice. |
Total Excise Tax |
Displays the total excise tax amount for all lines in this shipping excise invoice. |
Total ST/VAT Amount |
Displays either the total sales tax or the total VAT tax for all lines in this shipping excise invoice. |
Vehicle Information
Enter the required information about the shipment vehicle including vehicle number, lorry receipt number, and lorry receipt date.
Excise Invoice Lines
Displays the shipping lines added to this shipping excise invoice using the Select Shipping Lines page. The fields are populated from the shipping ID, sales order, or interunit transfer.
Src BU (source business unit) |
Displays the business unit that originated the order. For an interunit transfer it is the shipping PeopleSoft Inventory business unit and for a sales order it is the PeopleSoft Order Management business unit. |
Assessable Value |
The assessed per unit value of the item. This value appears by default from the Product Tax Applicability page or the Item Defn Tax Applicability page. |
Tax Transaction Type |
Defines the type of transaction. Values include: DEB (direct export with bond) DEWB (direct export without bond) DIMP (direct import) DOM (domestic) LEB (local export with bond) LEWB (local export without bond) LIMP (local import) |
Parent Product ID |
Displays the product kit ID if this line contains a product kit for PeopleSoft Order Management. |
EXD Rate Code |
Displays the tax rate code for excise duty. |
TX Rate Code |
Displays the tax rate code for sales tax or VAT tax. |
Tax Detail Lines
The bottom portion of this page displays the tax calculations for each excise invoice line. When you save the page or click the Calculate Tax button, the results of tax determination and tax calculations appear in this section.
Tax Type |
Displays the tax type that appears in this row. Values are: E (excise duty) or S (sales tax or VAT tax). |
Tax Cmpnt (tax component code) |
Displays codes established for each tax. |
Tax Dep Code (tax dependency code) |
Indicates the basis for calculating the tax, as well as the precedence of taxes of the same tax type that must be included. |
Calc Scheme (calculation scheme) |
Displays the default calculation scheme associated with the selected tax component code. You can override this value. Values are: A (amount): Ad hoc amount-based tax calculation. P (percentage): Percentage-based tax calculation. This is the default value. Q (quantity): Quantity-based tax calculation. |
Tax Rate Pct |
If the Calculation Scheme field value is set to Percentage, this field displays the percentage to be applied against the taxable amount. |
Tax Basis Amount |
If the Calculation Scheme field value is set to Percentage, this field displays the base value used for the tax calculations. |
Excise Curr Rptg (excise currency reporting) |
Displays the excise reporting currency that appears by default from the Tax Location page. |
Access the Excise Invoice Report page (Inventory, Fulfill Stock Orders, Shipping Excise IND, Shipping Excise Invoice Report).
A printed copy of the excise invoice is required to accompany all shipments from Indian locations when excise duty is applicable. You can run this report by using the Print button on the Shipping Excise Invoice page or running this report process page. Once the excise invoice is printed, any reprints are identified as duplicates.
Enter the parameters to print one or more shipping excise invoices that have a status of Ready or Posted.
Unit |
Enter the PeopleSoft Inventory business unit for the shipping excise invoices to be printed. |
Invoice Option |
Indicates the shipping excise invoices to be printed. Values are: All Invoices Date of Invoice Range of Invoices Single Customer Single Invoice Single Location |
Date Invoice Created |
Enter the date of the shipping excise invoices that you wish to print. This field is available if you selected Date of Invoice for the invoice option. |
From Invoice Number and To Invoice Number |
Enter the range of the excise invoice numbers for the shipping excise invoices that you want to print. These fields are available if you selected Range of Invoices for the invoice option. |
Customer ID |
Enter the customer ID for the shipping excise invoices that you wish to print. This field is available if you selected Single Customer for the invoice option. |
Document Series |
Enter the document number series for the shipping excise invoice that you want to print. This field is available if you selected Single Invoice for the invoice option. |
Invoice Number |
Enter the excise invoice number for the shipping excise invoice that you want to print. This field is available if you selected Single Invoice for the invoice option. |
Reprint Invoice |
Select to print a second copy of the shipping excise invoice. The invoice is marked as a duplicate. This field is available if you selected Single Invoice for the invoice option. When this option is selected, only invoices that have been previously printed are available in the Invoice Number field. |
Location |
Enter the location code for the shipping excise invoices that you want to print. This field is available if you selected Single Location for the invoice option. |